post-copy migration fails on destination with error such as:
2019-12-26T10:22:44.714644Z qemu-kvm: ram_block_discard_range:
Unaligned start address: 0x559d2afae9a0

Use qemu_memalign() to constrain the PPI RAM memory alignment.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.ibm.com>
Message-id: 20200103074000.1006389-3-marcandre.lureau@redhat.com

Improve LASI emulation
Add Artist graphics
Fix main memory allocation
Improve LDCW emulation wrt real hw

# gpg: Signature made Mon 27 Jan 2020 18:53:35 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-pa-20200127:
  target/hppa: Allow, but diagnose, LDCW aligned only mod 4
  hw/hppa/machine: Map the PDC memory region with higher priority
  hw/hppa/machine: Restrict the total memory size to 3GB
  hw/hppa/machine: Correctly check the firmware is in PDC range
  hppa: Add emulation of Artist graphics
  seabios-hppa: update to latest version
  hppa: Switch to tulip NIC by default
  hppa: add emulation of LASI PS2 controllers
  ps2: accept 'Set Key Make and Break' commands
  hppa: Add support for LASI chip with i82596 NIC
  hw/hppa/dino.c: Improve emulation of Dino PCI chip
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The PA-RISC 1.1 specification says that LDCW must be aligned mod 16
or the operation is undefined.  However, real hardware only generates
an unaligned access trap for unaligned mod 4.

Match real hardware, but diagnose with GUEST_ERROR a violation of
the specification.

At the same time fix a bug in the initialization of mop, where the
size was specified twice, and another to free the zero temporary.
Tested-by: NHelge Deller <deller@gmx.de>
Reported-by: NHelge Deller <deller@gmx.de>
Suggested-by: NJohn David Anglin <dave.anglin@bell.net>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The region in range [0xf0000000 - 0xf1000000] is the PDC area
(Processor Dependent Code), where the firmware is loaded.
This region has higher priority than the main memory.

When the machine has more than 3840MB of RAM, there is an
overlap. Since the PDC is closer to the CPU in the bus
hierarchy, it gets accessed first, and the CPU does not have
access to the RAM in this range.

To model the same behavior and keep a simple memory layout,
reduce the priority of the RAM region. The PDC region ends
overlapping the RAM.
Acked-by: NHelge Deller <deller@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200109000525.24744-4-f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The hardware expects DIMM slots of 1 or 2 GB, allowing up to
4 GB of memory. We want to accept the same amount of memory the
hardware can deal with. DIMMs of 768MB are not available.

However we have to deal with a firmware limitation: currently
SeaBIOS only supports 32-bit, and expects the RAM size in a
32-bit register. When using a 4GB configuration, the 32-bit
register get truncated and we report a size of 0MB to SeaBIOS,
which ends halting the machine:

  $ qemu-system-hppa -m 4g -serial stdio

  SeaBIOS: Machine configured with too little memory (0 MB), minimum is 16 MB.

  SeaBIOS wants SYSTEM HALT.

The easiest way is to restrict the machine to 3GB of memory.
Acked-by: NHelge Deller <deller@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200109000525.24744-3-f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The firmware has to reside in the PDC range. If the Elf file
expects to load it below FIRMWARE_START, it is incorrect,
regardless the RAM size.
Acked-by: NHelge Deller <deller@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200109000525.24744-2-f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.

Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Helge Deller (13):
      Add PDC_MEM_MAP and ENTRY_INIT_SRCH_FRST for OSF/MkLinux
      Return non-existant BTLB for PDC_BLOCK_TLB
      Add serial, parallel and LAN port support of  LASI chip
      Implement ENTRY_IO_BBLOCK_IN IODC function
      Do not print \r on parisc SeaBIOS
      Fix serial ports and add PDC_MODEL functions for special instructions enablement
      Implement SeaBIOS returning additional addresses. Fixes HP-UX boot.
      Fix mod_pgs (number of pages) for graphic cards
      Merge pull request #3 from svenschnelle/sti
      Merge pull request #4 from svenschnelle/parisc-qemu-4.1.0
      parisc: Implement PDC rendenzvous
      parisc: Improve soft power button emulation
      parisc: Fix line wrapping in STI console code

Sven Schnelle (7):
      parisc: fix PDC info for graphics adapter
      parisc: add missing header guard to hppa.h
      parisc: add LASI PS/2 emulation.
      parisc: Add STI support
      parisc: wire up graphics console
      parisc: Add support for setting STI screen resolution
      parisc: support LASI RTC register

Required for STI and LASI support. Also adds a few Bugfixes.
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-7-svens@stackframe.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Most HP PA-RISC machines have a Digital DS21142/43 Tulip network card,
only some very latest generation machines have an e1000 NIC.
Since qemu now provides an emulated tulip card, use that one instead.
Signed-off-by: NHelge Deller <deller@gmx.de>
Message-Id: <20191221222530.GB27803@ls3530.fritz.box>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Signed-off-by: NSven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-5-svens@stackframe.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

HP-UX sends both the 'Set key make and break (0xfc) and
'Set all key typematic make and break' (0xfa). QEMU response
with 'Resend' as it doesn't handle these commands. HP-UX than
reports an PS/2 max retransmission exceeded error. Add these
commands and just reply with ACK.
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-4-svens@stackframe.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

LASI is a built-in multi-I/O chip which supports serial, parallel,
network (Intel i82596 Apricot), sound and other functionalities.
LASI has been used in many HP PARISC machines.
This patch adds the necessary parts to allow Linux and HP-UX to detect
LASI and the network card.
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-3-svens@stackframe.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Block layer patches:

- iscsi: Cap block count from GET LBA STATUS (CVE-2020-1711)
- AioContext fixes in QMP commands for backup and bitmaps
- iotests fixes

# gpg: Signature made Mon 27 Jan 2020 17:49:58 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  iscsi: Don't access non-existent scsi_lba_status_descriptor
  iscsi: Cap block count from GET LBA STATUS (CVE-2020-1711)
  block/backup: fix memory leak in bdrv_backup_top_append()
  iotests: Test handling of AioContexts with some blockdev actions
  blockdev: Return bs to the proper context on snapshot abort
  blockdev: Acquire AioContext on dirty bitmap functions
  block/backup-top: Don't acquire context while dropping top
  blockdev: honor bdrv_try_set_aio_context() context requirements
  blockdev: unify qmp_blockdev_backup and blockdev-backup transaction paths
  blockdev: unify qmp_drive_backup and drive-backup transaction paths
  blockdev: fix coding style issues in drive_backup_prepare
  iotests: Add more "skip_if_unsupported" statements to the python tests
  iotests.py: Let wait_migration wait even more
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The tests of the dino chip with the Online-diagnostics CD
("ODE DINOTEST") now succeeds.
Additionally add some qemu trace events.
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191220211512.3289-2-svens@stackframe.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

In iscsi_co_block_status(), we may have received num_descriptors == 0
from the iscsi server. Therefore, we can't unconditionally access
lbas->descriptors[0]. Add the missing check.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NFelipe Franciosi <felipe@nutanix.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>

When querying an iSCSI server for the provisioning status of blocks (via
GET LBA STATUS), Qemu only validates that the response descriptor zero's
LBA matches the one requested. Given the SCSI spec allows servers to
respond with the status of blocks beyond the end of the LUN, Qemu may
have its heap corrupted by clearing/setting too many bits at the end of
its allocmap for the LUN.

A malicious guest in control of the iSCSI server could carefully program
Qemu's heap (by selectively setting the bitmap) and then smash it.

This limits the number of bits that iscsi_co_block_status() will try to
update in the allocmap so it can't overflow the bitmap.

Fixes: CVE-2020-1711
Cc: qemu-stable@nongnu.org
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Signed-off-by: NPeter Turschmid <peter.turschm@nutanix.com>
Signed-off-by: NRaphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_open_driver() allocates bs->opaque according to drv->instance_size.
There is no need to allocate it and overwrite opaque in
bdrv_backup_top_append().

Reproducer:

  $ QTEST_QEMU_BINARY=./x86_64-softmmu/qemu-system-x86_64 valgrind -q --leak-check=full tests/test-replication -p /replication/secondary/start
  ==29792== 24 bytes in 1 blocks are definitely lost in loss record 52 of 226
  ==29792==    at 0x483AB1A: calloc (vg_replace_malloc.c:762)
  ==29792==    by 0x4B07CE0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
  ==29792==    by 0x12BAB9: bdrv_open_driver (block.c:1289)
  ==29792==    by 0x12BEA9: bdrv_new_open_driver (block.c:1359)
  ==29792==    by 0x1D15CB: bdrv_backup_top_append (backup-top.c:190)
  ==29792==    by 0x1CC11A: backup_job_create (backup.c:439)
  ==29792==    by 0x1CD542: replication_start (replication.c:544)
  ==29792==    by 0x1401B9: replication_start_all (replication.c:52)
  ==29792==    by 0x128B50: test_secondary_start (test-replication.c:427)
  ...

Fixes: 7df7868b ("block: introduce backup-top filter driver")
Signed-off-by: NEiichi Tsukata <devel@etsukata.com>
Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Includes the following tests:

 - Adding a dirty bitmap.
   * RHBZ: 1782175

 - Starting a drive-mirror to an NBD-backed target.
   * RHBZ: 1746217, 1773517

 - Aborting an external snapshot transaction.
   * RHBZ: 1779036

 - Aborting a blockdev backup transaction.
   * RHBZ: 1782111

For each one of them, a VM with a number of disks running in an
IOThread AioContext is used.
Signed-off-by: NSergio Lopez <slp@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

external_snapshot_abort() calls to bdrv_set_backing_hd(), which
returns state->old_bs to the main AioContext, as it's intended to be
used then the BDS is going to be released. As that's not the case when
aborting an external snapshot, return it to the AioContext it was
before the call.

This issue can be triggered by issuing a transaction with two actions,
a proper blockdev-snapshot-sync and a bogus one, so the second will
trigger a transaction abort. This results in a crash with an stack
trace like this one:

 #0  0x00007fa1048b28df in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
 #1  0x00007fa10489ccf5 in __GI_abort () at abort.c:79
 #2  0x00007fa10489cbc9 in __assert_fail_base
     (fmt=0x7fa104a03300 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x5572240b44d8 "bdrv_get_aio_context(old_bs) == bdrv_get_aio_context(new_bs)", file=0x557224014d30 "block.c", line=2240, function=<optimized out>) at assert.c:92
 #3  0x00007fa1048aae96 in __GI___assert_fail
     (assertion=assertion@entry=0x5572240b44d8 "bdrv_get_aio_context(old_bs) == bdrv_get_aio_context(new_bs)", file=file@entry=0x557224014d30 "block.c", line=line@entry=2240, function=function@entry=0x5572240b5d60 <__PRETTY_FUNCTION__.31620> "bdrv_replace_child_noperm") at assert.c:101
 #4  0x0000557223e631f8 in bdrv_replace_child_noperm (child=0x557225b9c980, new_bs=new_bs@entry=0x557225c42e40) at block.c:2240
 #5  0x0000557223e68be7 in bdrv_replace_node (from=0x557226951a60, to=0x557225c42e40, errp=0x5572247d6138 <error_abort>) at block.c:4196
 #6  0x0000557223d069c4 in external_snapshot_abort (common=0x557225d7e170) at blockdev.c:1731
 #7  0x0000557223d069c4 in external_snapshot_abort (common=0x557225d7e170) at blockdev.c:1717
 #8  0x0000557223d09013 in qmp_transaction (dev_list=<optimized out>, has_props=<optimized out>, props=0x557225cc7d70, errp=errp@entry=0x7ffe704c0c98) at blockdev.c:2360
 #9  0x0000557223e32085 in qmp_marshal_transaction (args=<optimized out>, ret=<optimized out>, errp=0x7ffe704c0d08) at qapi/qapi-commands-transaction.c:44
 #10 0x0000557223ee798c in do_qmp_dispatch (errp=0x7ffe704c0d00, allow_oob=<optimized out>, request=<optimized out>, cmds=0x5572247d3cc0 <qmp_commands>) at qapi/qmp-dispatch.c:132
 #11 0x0000557223ee798c in qmp_dispatch (cmds=0x5572247d3cc0 <qmp_commands>, request=<optimized out>, allow_oob=<optimized out>) at qapi/qmp-dispatch.c:175
 #12 0x0000557223e06141 in monitor_qmp_dispatch (mon=0x557225c69ff0, req=<optimized out>) at monitor/qmp.c:120
 #13 0x0000557223e0678a in monitor_qmp_bh_dispatcher (data=<optimized out>) at monitor/qmp.c:209
 #14 0x0000557223f2f366 in aio_bh_call (bh=0x557225b9dc60) at util/async.c:117
 #15 0x0000557223f2f366 in aio_bh_poll (ctx=ctx@entry=0x557225b9c840) at util/async.c:117
 #16 0x0000557223f32754 in aio_dispatch (ctx=0x557225b9c840) at util/aio-posix.c:459
 #17 0x0000557223f2f242 in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at util/async.c:260
 #18 0x00007fa10913467d in g_main_dispatch (context=0x557225c28e80) at gmain.c:3176
 #19 0x00007fa10913467d in g_main_context_dispatch (context=context@entry=0x557225c28e80) at gmain.c:3829
 #20 0x0000557223f31808 in glib_pollfds_poll () at util/main-loop.c:219
 #21 0x0000557223f31808 in os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
 #22 0x0000557223f31808 in main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
 #23 0x0000557223d13201 in main_loop () at vl.c:1828
 #24 0x0000557223bbfb82 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4504

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1779036Signed-off-by: NSergio Lopez <slp@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Dirty map addition and removal functions are not acquiring to BDS
AioContext, while they may call to code that expects it to be
acquired.

This may trigger a crash with a stack trace like this one:

 #0  0x00007f0ef146370f in __GI_raise (sig=sig@entry=6)
     at ../sysdeps/unix/sysv/linux/raise.c:50
 #1  0x00007f0ef144db25 in __GI_abort () at abort.c:79
 #2  0x0000565022294dce in error_exit
     (err=<optimized out>, msg=msg@entry=0x56502243a730 <__func__.16350> "qemu_mutex_unlock_impl") at util/qemu-thread-posix.c:36
 #3  0x00005650222950ba in qemu_mutex_unlock_impl
     (mutex=mutex@entry=0x5650244b0240, file=file@entry=0x565022439adf "util/async.c", line=line@entry=526) at util/qemu-thread-posix.c:108
 #4  0x0000565022290029 in aio_context_release
     (ctx=ctx@entry=0x5650244b01e0) at util/async.c:526
 #5  0x000056502221cd08 in bdrv_can_store_new_dirty_bitmap
     (bs=bs@entry=0x5650244dc820, name=name@entry=0x56502481d360 "bitmap1", granularity=granularity@entry=65536, errp=errp@entry=0x7fff22831718)
     at block/dirty-bitmap.c:542
 #6  0x000056502206ae53 in qmp_block_dirty_bitmap_add
     (errp=0x7fff22831718, disabled=false, has_disabled=<optimized out>, persistent=<optimized out>, has_persistent=true, granularity=65536, has_granularity=<optimized out>, name=0x56502481d360 "bitmap1", node=<optimized out>) at blockdev.c:2894
 #7  0x000056502206ae53 in qmp_block_dirty_bitmap_add
     (node=<optimized out>, name=0x56502481d360 "bitmap1", has_granularity=<optimized out>, granularity=<optimized out>, has_persistent=true, persistent=<optimized out>, has_disabled=false, disabled=false, errp=0x7fff22831718) at blockdev.c:2856
 #8  0x00005650221847a3 in qmp_marshal_block_dirty_bitmap_add
     (args=<optimized out>, ret=<optimized out>, errp=0x7fff22831798)
     at qapi/qapi-commands-block-core.c:651
 #9  0x0000565022247e6c in do_qmp_dispatch
     (errp=0x7fff22831790, allow_oob=<optimized out>, request=<optimized out>, cmds=0x565022b32d60 <qmp_commands>) at qapi/qmp-dispatch.c:132
 #10 0x0000565022247e6c in qmp_dispatch
     (cmds=0x565022b32d60 <qmp_commands>, request=<optimized out>, allow_oob=<optimized out>) at qapi/qmp-dispatch.c:175
 #11 0x0000565022166061 in monitor_qmp_dispatch
     (mon=0x56502450faa0, req=<optimized out>) at monitor/qmp.c:145
 #12 0x00005650221666fa in monitor_qmp_bh_dispatcher
     (data=<optimized out>) at monitor/qmp.c:234
 #13 0x000056502228f866 in aio_bh_call (bh=0x56502440eae0)
     at util/async.c:117
 #14 0x000056502228f866 in aio_bh_poll (ctx=ctx@entry=0x56502440d7a0)
     at util/async.c:117
 #15 0x0000565022292c54 in aio_dispatch (ctx=0x56502440d7a0)
     at util/aio-posix.c:459
 #16 0x000056502228f742 in aio_ctx_dispatch
     (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at util/async.c:260
 #17 0x00007f0ef5ce667d in g_main_dispatch (context=0x56502449aa40)
     at gmain.c:3176
 #18 0x00007f0ef5ce667d in g_main_context_dispatch
     (context=context@entry=0x56502449aa40) at gmain.c:3829
 #19 0x0000565022291d08 in glib_pollfds_poll () at util/main-loop.c:219
 #20 0x0000565022291d08 in os_host_main_loop_wait
     (timeout=<optimized out>) at util/main-loop.c:242
 #21 0x0000565022291d08 in main_loop_wait (nonblocking=<optimized out>)
     at util/main-loop.c:518
 #22 0x00005650220743c1 in main_loop () at vl.c:1828
 #23 0x0000565021f20a72 in main
     (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>)
     at vl.c:4504

Fix this by acquiring the AioContext at qmp_block_dirty_bitmap_add()
and qmp_block_dirty_bitmap_add().

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1782175Signed-off-by: NSergio Lopez <slp@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

All paths that lead to bdrv_backup_top_drop(), except for the call
from backup_clean(), imply that the BDS AioContext has already been
acquired, so doing it there too can potentially lead to QEMU hanging
on AIO_WAIT_WHILE().

An easy way to trigger this situation is by issuing a two actions
transaction, with a proper and a bogus blockdev-backup, so the second
one will trigger a rollback. This will trigger a hang with an stack
trace like this one:

 #0  0x00007fb680c75016 in __GI_ppoll (fds=0x55e74580f7c0, nfds=1, timeout=<optimized out>,
     timeout@entry=0x0, sigmask=sigmask@entry=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:39
 #1  0x000055e743386e09 in ppoll (__ss=0x0, __timeout=0x0, __nfds=<optimized out>, __fds=<optimized out>)
     at /usr/include/bits/poll2.h:77
 #2  0x000055e743386e09 in qemu_poll_ns
     (fds=<optimized out>, nfds=<optimized out>, timeout=<optimized out>) at util/qemu-timer.c:336
 #3  0x000055e743388dc4 in aio_poll (ctx=0x55e7458925d0, blocking=blocking@entry=true)
     at util/aio-posix.c:669
 #4  0x000055e743305dea in bdrv_flush (bs=bs@entry=0x55e74593c0d0) at block/io.c:2878
 #5  0x000055e7432be58e in bdrv_close (bs=0x55e74593c0d0) at block.c:4017
 #6  0x000055e7432be58e in bdrv_delete (bs=<optimized out>) at block.c:4262
 #7  0x000055e7432be58e in bdrv_unref (bs=bs@entry=0x55e74593c0d0) at block.c:5644
 #8  0x000055e743316b9b in bdrv_backup_top_drop (bs=bs@entry=0x55e74593c0d0) at block/backup-top.c:273
 #9  0x000055e74331461f in backup_job_create
     (job_id=0x0, bs=bs@entry=0x55e7458d5820, target=target@entry=0x55e74589f640, speed=0, sync_mode=MIRROR_SYNC_MODE_FULL, sync_bitmap=sync_bitmap@entry=0x0, bitmap_mode=BITMAP_SYNC_MODE_ON_SUCCESS, compress=false, filter_node_name=0x0, on_source_error=BLOCKDEV_ON_ERROR_REPORT, on_target_error=BLOCKDEV_ON_ERROR_REPORT, creation_flags=0, cb=0x0, opaque=0x0, txn=0x0, errp=0x7ffddfd1efb0) at block/backup.c:478
 #10 0x000055e74315bc52 in do_backup_common
     (backup=backup@entry=0x55e746c066d0, bs=bs@entry=0x55e7458d5820, target_bs=target_bs@entry=0x55e74589f640, aio_context=aio_context@entry=0x55e7458a91e0, txn=txn@entry=0x0, errp=errp@entry=0x7ffddfd1efb0)
     at blockdev.c:3580
 #11 0x000055e74315c37c in do_blockdev_backup
     (backup=backup@entry=0x55e746c066d0, txn=0x0, errp=errp@entry=0x7ffddfd1efb0)
     at /usr/src/debug/qemu-kvm-4.2.0-2.module+el8.2.0+5135+ed3b2489.x86_64/./qapi/qapi-types-block-core.h:1492
 #12 0x000055e74315c449 in blockdev_backup_prepare (common=0x55e746a8de90, errp=0x7ffddfd1f018)
     at blockdev.c:1885
 #13 0x000055e743160152 in qmp_transaction
     (dev_list=<optimized out>, has_props=<optimized out>, props=0x55e7467fe2c0, errp=errp@entry=0x7ffddfd1f088) at blockdev.c:2340
 #14 0x000055e743287ff5 in qmp_marshal_transaction
     (args=<optimized out>, ret=<optimized out>, errp=0x7ffddfd1f0f8)
     at qapi/qapi-commands-transaction.c:44
 #15 0x000055e74333de6c in do_qmp_dispatch
     (errp=0x7ffddfd1f0f0, allow_oob=<optimized out>, request=<optimized out>, cmds=0x55e743c28d60 <qmp_commands>) at qapi/qmp-dispatch.c:132
 #16 0x000055e74333de6c in qmp_dispatch
     (cmds=0x55e743c28d60 <qmp_commands>, request=<optimized out>, allow_oob=<optimized out>)
     at qapi/qmp-dispatch.c:175
 #17 0x000055e74325c061 in monitor_qmp_dispatch (mon=0x55e745908030, req=<optimized out>)
     at monitor/qmp.c:145
 #18 0x000055e74325c6fa in monitor_qmp_bh_dispatcher (data=<optimized out>) at monitor/qmp.c:234
 #19 0x000055e743385866 in aio_bh_call (bh=0x55e745807ae0) at util/async.c:117
 #20 0x000055e743385866 in aio_bh_poll (ctx=ctx@entry=0x55e7458067a0) at util/async.c:117
 #21 0x000055e743388c54 in aio_dispatch (ctx=0x55e7458067a0) at util/aio-posix.c:459
 #22 0x000055e743385742 in aio_ctx_dispatch
     (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at util/async.c:260
 #23 0x00007fb68543e67d in g_main_dispatch (context=0x55e745893a40) at gmain.c:3176
 #24 0x00007fb68543e67d in g_main_context_dispatch (context=context@entry=0x55e745893a40) at gmain.c:3829
 #25 0x000055e743387d08 in glib_pollfds_poll () at util/main-loop.c:219
 #26 0x000055e743387d08 in os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
 #27 0x000055e743387d08 in main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
 #28 0x000055e74316a3c1 in main_loop () at vl.c:1828
 #29 0x000055e743016a72 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>)
     at vl.c:4504

Fix this by not acquiring the AioContext there, and ensuring all paths
leading to it have it already acquired (backup_clean()).

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1782111Signed-off-by: NSergio Lopez <slp@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_try_set_aio_context() requires that the old context is held, and
the new context is not held. Fix all the occurrences where it's not
done this way.
Suggested-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NSergio Lopez <slp@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Issuing a blockdev-backup from qmp_blockdev_backup takes a slightly
different path than when it's issued from a transaction. In the code,
this is manifested as some redundancy between do_blockdev_backup() and
blockdev_backup_prepare().

This change unifies both paths, merging do_blockdev_backup() and
blockdev_backup_prepare(), and changing qmp_blockdev_backup() to
create a transaction instead of calling do_backup_common() direcly.

As a side-effect, now qmp_blockdev_backup() is executed inside a
drained section, as it happens when creating a blockdev-backup
transaction. This change is visible from the user's perspective, as
the job gets paused and immediately resumed before starting the actual
work.
Signed-off-by: NSergio Lopez <slp@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Issuing a drive-backup from qmp_drive_backup takes a slightly
different path than when it's issued from a transaction. In the code,
this is manifested as some redundancy between do_drive_backup() and
drive_backup_prepare().

This change unifies both paths, merging do_drive_backup() and
drive_backup_prepare(), and changing qmp_drive_backup() to create a
transaction instead of calling do_backup_common() direcly.

As a side-effect, now qmp_drive_backup() is executed inside a drained
section, as it happens when creating a drive-backup transaction. This
change is visible from the user's perspective, as the job gets paused
and immediately resumed before starting the actual work.

Also fix tests 141, 185 and 219 to cope with the extra
JOB_STATUS_CHANGE lines.
Signed-off-by: NSergio Lopez <slp@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Fix a couple of minor coding style issues in drive_backup_prepare.
Signed-off-by: NSergio Lopez <slp@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The python code already contains a possibility to skip tests if the
corresponding driver is not available in the qemu binary - use it
in more spots to avoid that the tests are failing if the driver has
been disabled.

While we're at it, we can now also remove some of the old checks that
were using iotests.supports_quorum() - and which were apparently not
working as expected since the tests aborted instead of being skipped
when "quorum" was missing in the QEMU binary.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The "migration completed" event may be sent (on the source, to be
specific) before the migration is actually completed, so the VM runstate
will still be "finish-migrate" instead of "postmigrate".  So ask the
users of VM.wait_migration() to specify the final runstate they desire
and then poll the VM until it has reached that state.  (This should be
over very quickly, so busy polling is fine.)

Without this patch, I see intermittent failures in the new iotest 280
under high system load.  I have not yet seen such failures with other
iotests that use VM.wait_migration() and query-status afterwards, but
maybe they just occur even more rarely, or it is because they also wait
on the destination VM to be running.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

s390x changes:
- kvm: re-enable adapter interrupt suppression (AIS)
- fixes and cleanups

# gpg: Signature made Mon 27 Jan 2020 12:14:12 GMT
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20200127:
  s390x: sigp: Fix sense running reporting
  hw/s390x: Add a more verbose comment about get_machine_class() and the wrappers
  target/s390x: Remove DisasFields argument from extract_insn
  target/s390x: Move DisasFields into DisasContext
  target/s390x: Pass DisasContext to get_field and have_field
  target/s390x: Remove DisasFields argument from callbacks
  target/s390x: Move struct DisasFields definition earlier
  target/s390x/kvm: Enable adapter interruption suppression again
  docs/devel: fix stable process doc formatting
  target/s390x: Remove duplicated ifdef macro
  s390x/event-facility: fix error propagation
  s390x: adapter routes error handling
  s390x/event-facility.c: remove unneeded labels
  intc/s390_flic_kvm.c: remove unneeded label in kvm_flic_load()
  s390x/sclp.c: remove unneeded label in sclp_service_call()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The logic was inverted and reported running if the cpu was stopped.
Let's fix that.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Fixes: d1b468bc ("s390x/tcg: implement SIGP SENSE RUNNING STATUS")
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20200124134818.9981-1-frankja@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

While working on the "Enable adapter interruption suppression again"
recently, I had to discover that the meaning of get_machine_class()
and the related *_allowed() wrappers is not very obvious. Add a more
verbose comment here to clarify how these should be used.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20200123170256.12386-1-thuth@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The separate pointer is now redundant.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20200123232248.1800-6-richard.henderson@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

I believe that the separate allocation of DisasFields from DisasContext
was meant to limit the places from which we could access fields.  But
that plan did not go unchanged, and since DisasContext contains a pointer
to fields, the substructure is accessible everywhere.

By allocating the substructure with DisasContext, we improve the locality
of the accesses by avoiding one level of pointer chasing.  In addition,
we avoid a dangling pointer to stack allocated memory, diagnosed by static
checkers.

Launchpad: https://bugs.launchpad.net/bugs/1661815Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20200123232248.1800-5-richard.henderson@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

All callers pass s->fields, so we might as well pass s directly.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20200123232248.1800-4-richard.henderson@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The DisasFields data is available from DisasContext.
We do not need to pass a separate argument.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20200123232248.1800-3-richard.henderson@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We will want to include the struct in DisasContext.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20200123232248.1800-2-richard.henderson@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The AIS feature has been disabled late in the v2.10 development cycle since
there were some issues with migration (see commit 3f2d07b3 -
"s390x/ais: for 2.10 stable: disable ais facility"). We originally wanted
to enable it again for newer machine types, but apparently we forgot to do
this so far. Let's do it now for the machines that support proper CPU models.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1756946Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20200122101437.5069-1-thuth@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Tested-by: NMatthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Enumeration of stable criteria needs proper bullet points.

Message-Id: <20200113103023.31255-1-cohuck@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Commit ae71ed86 replaced the use of global max_cpus variable
with a machine property, but introduced a unnecessary ifdef, as
this block is already in the 'not CONFIG_USER_ONLY' branch part:

   86 #if defined(CONFIG_USER_ONLY)
   87
  ...
  106 #else /* !CONFIG_USER_ONLY */
  107
  ...
  292 static void do_ext_interrupt(CPUS390XState *env)
  293 {
  ...
  313 #ifndef CONFIG_USER_ONLY
  314         MachineState *ms = MACHINE(qdev_get_machine());
  315         unsigned int max_cpus = ms->smp.max_cpus;
  316 #endif

To ease code review, remove the duplicated preprocessor macro,
and move the declarations at the beginning of the statement.
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200121110349.25842-6-philmd@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We currently check (by error) if the passed-in Error pointer errp
is non-null and return after realizing the first child of the
event facility in that case. Symptom is that 'virsh shutdown'
does not work, as the sclpquiesce device is not realized.

Fix this by (correctly) checking the local Error err.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Fixes: 3d508334 ("s390x/event-facility: Fix realize() error API violations")
Message-Id: <20200121095506.8537-1-cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

If the kernel irqchip has been disabled, we don't want the
{add,release}_adapter_routes routines to call any kvm_irqchip_*
interfaces, as they may rely on an irqchip actually having been
created. Just take a quick exit in that case instead. If you are
trying to use irqfd without a kernel irqchip, we will fail with
an error.

Also initialize routes->gsi[] with -1 in the virtio-ccw handling,
to make sure we don't trip over other errors, either. (Nobody
else uses the gsi array in that structure.)

Fixes: d426d9fb ("s390x/virtio-ccw: wire up irq routing and irqfds")
Reviewed-by: NThomas Huth <thuth@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200117111147.5006-1-cohuck@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>