While we are sleeping we are not sending, so we should not use that
time to estimate our bandwidth.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>

0 is a very bad initial value, what we are trying to get is
max_downtime, so that is a much better estimation.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>

If you're full screen, you probably expect Ctrl-Q to go to the guest,
not the host.  I think restricting certain menus is the right way to
handle this generally speaking.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-10-git-send-email-aliguori@us.ibm.com

A user can still enable SDL with '-sdl' or '-display sdl' but start making the
default display GTK by default.

I'd also like to deprecate the SDL display and remove it in a few releases.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-9-git-send-email-aliguori@us.ibm.com

This includes a de_DE translation from Kevin Wolf and an it translation from
Paolo Bonzini.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-8-git-send-email-aliguori@us.ibm.com

Basic menu items to enter full screen mode and zoom in/out.  Unlike SDL, we
don't allow arbitrary scaling based on window resizing.  The current behavior
with SDL causes a lot of problems for me.

Sometimes I accidentally resize the window a tiny bit while trying to move it
(Ubuntu's 1-pixel window decorations don't help here).  After that, scaling is
now active and if the screen changes size again, badness ensues since the
aspect ratio is skewed.

Allowing zooming by 25% in and out should cover most use cases.  We can add a
more flexible scaling later but for now, I think this is a more friendly
behavior.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-7-git-send-email-aliguori@us.ibm.com

There is a small deviation from SDL's behavior here.  Instead of Ctrl+Alt
triggering grab, we now use Ctrl-Alt-g to trigger grab.

GTK will not accept Ctrl+Alt as an accelerator since it just consists of
modifiers.  Having grab as a proper accelerator is important as it allows a user
to override the accelerator for accessibility purposes.

We also are not automatically grabbing on left-click.  Besides the inability to
tie mouse clicks to an accelerator, I think this behavior is hard to discover
and since it only happens depending on the guest state, it can lead to confusing
behavior.

This can be changed in the future if there's a strong resistence to dropping
left-click-to-grab, but I think we're better off dropping it.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-6-git-send-email-aliguori@us.ibm.com

This enables VteTerminal to be used to render the text consoles.  VteTerminal is
the same widget used by gnome-terminal which means it's VT100 emulation is as
good as they come.

It's also screen reader accessible, supports copy/paste, proper scrolling and
most of the other features you would expect from a terminal widget.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-5-git-send-email-aliguori@us.ibm.com

This is minimalistic and just contains the basic widget infrastructure.  The GUI
consists of a menu and a GtkNotebook.  To start with, the notebook has its tabs
hidden which provides a UI that looks very similar to SDL with the exception of
the menu bar.

The menu bar allows a user to toggle the visibility of the tabs.  Cairo is used
for rendering.

I used gtk-vnc as a reference.  gtk-vnc solves the same basic problems as QEMU
since it was originally written as a remote display for QEMU.  So for the most
part, the approach to rendering and keyboard handling should be pretty solid for
GTK.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com

We want to expose VCs using a VteTerminal widget.  We need access to provide our
own CharDriverState in order to do this.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-3-git-send-email-aliguori@us.ibm.com

GTK won't build with strict-prototypes due to gtkitemfactory.h:

    /* We use () here to mean unspecified arguments. This is deprecated
     * as of C99, but we can't change it without breaking compatibility.
     * (Note that if we are included from a C++ program () will mean
     * (void) so an explicit cast will be needed.)
     */
    typedef	void	(*GtkItemFactoryCallback)  ();
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-2-git-send-email-aliguori@us.ibm.com

num_interfaces only tells you how many interfaces the concrete child class has
(as defined in the TypeInfo). This means if you have a child class which defines
no interfaces of its own, but its parent has interfaces you cannot cast to those
parent interfaces.

Fixed changing the guard to check the class->interfaces list instead (which is
a complete flattened list of implemented interfaces).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a8c2db3b9b1f3c4bb81aca352b69e33260f36545.1361246206.git.peter.crosthwaite@xilinx.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The QOM framework will attempt the recreate a classes interface list from
scratch for each class. This means that a child class should zero out the
list of interfaces when cloned from the parent class.

Currently the list is memcpy()d from the parent to the child. As the interface
list is just a pointer to a list, this means the parent and child will share
the same list of interfaces. When the child inits, it will append its own
interfaces to the parents list. This is incorrect as the parent should not pick
up its childs interfaces.

This actually causes an infinite loop at class init time, as the child will
iterate through the parent interface list adding each itf to its own list(in
type_initialize()). As the list is (erroneously) shared, the new interface
instances for the child are appended to the parent, and the iterator never hits
the tail and loops forever.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1f58d2b629d82865dbb2fd5ba8445854049c4382.1361246206.git.peter.crosthwaite@xilinx.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In case host and guest endianness differ the vga code first creates
a shared surface (using qemu_create_displaysurface_from), then goes
patch the surface format to indicate that the bytes must be swapped.

The switch to pixman broke that hack as the format patching isn't
propagated into the pixman image, so ui code using the pixman image
directly (such as vnc) uses the wrong format.

Fix that by adding a byteswap parameter to
qemu_create_displaysurface_from, so we'll use the correct format
when creating the surface (and the pixman image) and don't have
to patch the format afterwards.

[ v2: unbreak xen build ]

Cc: qemu-stable@nongnu.org
Cc: mark.cave-ayland@ilande.co.uk
Cc: agraf@suse.de
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The top level TODO file hasn't been touched since 2008, so it's now
an unhelpful and out of date mix of things that have already been done,
things that don't make sense any more and things which could in theory
be done but are not in practice important enough (or we'd have done
them some time in the last five years). Remove it. The bug tracking
system is probably a better place to track TODO items if we want to
do so.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1361377462-19816-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

aio-posix.c could not take advantage of G_IO_HUP and G_IO_ERR because
select(2) does not have equivalent events.  Now that g_poll(3) is used
we can support G_IO_HUP and G_IO_ERR.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-11-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

AioHandler already has a GPollFD so we can directly use its
events/revents.

Add the int pollfds_idx field to AioContext so we can map g_poll(3)
results back to AioHandlers.

Reuse aio_dispatch() to invoke handlers after g_poll(3).
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-10-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We will need to loop over AioHandlers calling ->io_read()/->io_write()
when aio_poll() is converted from select(2) to g_poll(2).

Luckily the code for this already exists, extract it into the new
aio_dispatch() function.

Two small changes:

 * aio_poll() checks !node->deleted to avoid calling handlers that have
   been deleted.

 * Fix typo 'then' -> 'them' in aio_poll() comment.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-9-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that all *_fill() and *_poll() functions use GPollFD we no longer
need rfds/wfds/xfds or pollfds_from_select()/pollfds_to_select().

>From now on everything uses GPollFD.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-8-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Convert iohandler_select_fill() and iohandler_select_poll() to use
GPollFD instead of rfds/wfds/xfds.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-7-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Slirp uses rfds/wfds/xfds more extensively than other QEMU components.

The rarely-used out-of-band TCP data feature is used.  That means we
need the full table of select(2) to g_poll(3) events:

  rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR
  wfds -> G_IO_OUT | G_IO_ERR
  xfds -> G_IO_PRI

I came up with this table by looking at Linux fs/select.c which maps
select(2) to poll(2) internally.

Another detail to watch out for are the global variables that reference
rfds/wfds/xfds during slirp_select_poll().  sofcantrcvmore() and
sofcantsendmore() use these globals to clear fd_set bits.  When
sofcantrcvmore() is called, the wfds bit is cleared so that the write
handler will no longer be run for this iteration of the event loop.

This actually seems buggy to me since TCP connections can be half-closed
and we'd still want to handle data in half-duplex fashion.  I think the
real intention is to avoid running the read/write handler when the
socket has been fully closed.  This is indicated with the SS_NOFDREF
state bit so we now check for it before invoking the TCP write handler.
Note that UDP/ICMP code paths don't care because they are
connectionless.

Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces.
I followed the style of the surrounding code.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The slirp glue code uses tabs in some places.  Since the next patch will
modify the file, convert tabs to spaces and fix checkpatch.pl issues.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-5-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Convert glib file descriptor polling from rfds/wfds/xfds to GPollFD.

The Windows code still needs poll_fds[] and n_poll_fds but they can now
become local variables.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-4-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use g_poll(3) instead of select(2).  Well, this is kind of a cheat.
It's true that we're now using g_poll(3) on POSIX hosts but the *_fill()
and *_poll() functions are still using rfds/wfds/xfds.

We've set the scene to start converting *_fill() and *_poll() functions
step-by-step until no more rfds/wfds/xfds users remain.  Then we'll drop
the temporary gpollfds_from_select() and gpollfds_to_select() functions
and be left with native g_poll(2).

On Windows things are a little crazy: convert from rfds/wfds/xfds to
GPollFDs, back to rfds/wfds/xfds, call select(2), rfds/wfds/xfds back to
GPollFDs, and finally back to rfds/wfds/xfds again.  This is only
temporary and keeps the Windows build working through the following
patches.  We'll drop this excessive conversion later and be left with a
single GPollFDs -> select(2) -> GPollFDs sequence that allows Windows to
use select(2) while the rest of QEMU only knows about GPollFD.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-3-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-2-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/usb.78:
  uas-uas: usb3 streams
  usb-xhci: usb3 streams
  usb-core: usb3 streams
  usb: fix endpoint descriptor ordering
  usb-redir: simplify packet copy
  usb: make usb_packet_copy operate on combined packets
  usb: add usb_ep_set_halted
  usb-host: remove usb_host_device_close
  usb-host: move legacy cmd line bits
  usb-storage: use scsi_req_enqueue return value
  allow disabling usb smartcard support
  make usb devices configurable
  fix scripts/make_device_config.sh
  usb: Makefile cleanup

# By Alin Tomescu (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  .gitignore: Ignore optionrom/*.asm
  ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c
  Add some missing qtest binaries to .gitignore
  xilinx_axienet.c: Assert no error when making link
  Remove forward declaration of non-existant variable

Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM
with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU
would just hang. However, when I used -m 256, the machine would boot.

I looked through the code in hw/ and it seems there is an error when the
RAM memory is setup (if my understanding is correct).

After patching it, the machine launched and booted successfully with 512MB of
RAM.
Signed-off-by: NAlin Tomescu <tomescu.alin@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

These binaries are generated during make check on at least some
configurations, so att them to .gitignore.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This gives an awful silent failure when it doesn't work. Assert against link
creation failure.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This variable has been removed 5 years ago in 970ac5a3.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add usb3 streams support to the uas (usb attached scsi) emulation.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add streams support to the xhci emulation.  No secondary streams yet,
only linear stream arays are supported for now.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds support for usb3 streams to the usb subsystem core.
This is just adding a streams field / parameter in a number of places.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Fix the ordering of the endpoint descriptors for superspeed endpoints:
The superspeed companion must come first, possible additional
descriptors for the endpoint after that.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

usb_packet_copy can handle combined packets now,
so it isn't needed to special-case them any more.

Also use the new usb_packet_size() function.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Likewise usb_packet_skip.
Also usb_packet_size.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>