- 09 7月, 2012 37 次提交
-
-
由 Anthony Liguori 提交于
* kwolf/for-anthony: (24 commits) block: Factor bdrv_read_unthrottled() out of guess_disk_lchs() qtest: Tidy up temporary files properly fdc: Drop broken code for user-defined floppy geometry fdc_test: introduce test_sense_interrupt fdc_test: update media_change test fdc: fix interrupt handling fdc: rewrite seek and DSKCHG bit handling block: introduce bdrv_swap, implement bdrv_append on top of it block: copy over job and dirty bitmap fields in bdrv_append raw: hook into blkdebug blkdebug: optionally tie errors to a specific sector blkdebug: store list of active rules blkdebug: pass getlength to underlying file blkdebug: tiny cleanup blkdebug: remove sync i/o events sheepdog: traverse pending_list from the first for each time sheepdog: split outstanding list into inflight and pending sheepdog: make sure we don't free aiocb before sending all requests sheepdog: use coroutine based socket functions in coroutine context sheepdog: restart I/O when socket becomes ready in do_co_req() ...
-
由 Markus Armbruster 提交于
To prepare move of guess_disk_lchs() into hw/, where it poking BlockDriverState member io_limits_enabled directly would be unclean. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Each test litters /tmp with several files: a pid file and two sockets. Tidy up. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Anthony Liguori 提交于
* kraxel/usb.55: usb-host: add trace events for iso xfers usb: fix interface initialization usb: split endpoint init and reset usb-redir: Correctly handle the usb_redir_babble usbredir status ehci: Kick async schedule on wakeup in the non companion case usb-ehci: Fix an assert whenever isoc transfers are used ehci: don't flush cache on doorbell rings. ehci: fix td writeback ehci: fix ehci_qh_do_overlay
-
由 Anthony Liguori 提交于
* bonzini/scsi-next: scsi: Fix transfer length for READ POSITION commands. scsi: Add basic support for SCSI media changer commands. scsi: Ensure command and transfer lengths are set for all SCSI devices scsi: Fix LOAD_UNLOAD scsi: Fix data length == SCSI_SENSE_BUF_SIZE virtio-scsi: do not crash on adding buffers to the event queue megasas: LSI Megaraid SAS HBA emulation megasas: Add header file ISCSI: force use of sg for SMC and SSC devices ISCSI: Add SCSI passthrough via scsi-generic to libiscsi scsi-disk: implement READ DISC INFORMATION atapi: implement READ DISC INFORMATION scsi: add a qdev property for the disk's WWN scsi: simplify handling of the VPD page length field
-
由 Anthony Liguori 提交于
* stefanha/trivial-patches: configure: Remove help for --disable-vnc-thread, --enable-vnc-thread cpu-common.h: Remove a pointless ifndef CONFIG_USER_ONLY cpu-common.h: Remove unnecessary guard on including targphys.h
-
由 Markus Armbruster 提交于
bdrv_get_floppy_geometry_hint() fails to store through its parameter drive when bs has a geometry hint. Makes fd_revalidate() assign random crap to drv->drive. Has been broken that way for ages. Harmless, because: * The only way to set a geometry hint is -drive if=none,cyls=... Since commit c219331e, probably unintentional. * The only use of drv->drive is as argument to another bdrv_get_floppy_geometry_hint(). Which doesn't use it, since the geometry hint is still there. Drop the broken code, ignore -drive parameter cyls, heads and secs for floppies even with if=none, just like before commit c219331e. Matches -help, which explains cyls, heads, secs as "hard disk physical geometry". Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Pavel Hrdina 提交于
Calling sense interrupt status while there is no interrupt should return invalid command (0x80). Read command should always returns in st0 seek_end bit set to 1. Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Pavel Hrdina 提交于
After rewrite DSKCHG bit handling the test has to be updated. Now is needed to seek to different track to clear DSKCHG bit. Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Pavel Hrdina 提交于
If you call the SENSE INTERRUPT STATUS command while there is no interrupt waiting you get as result unknown command. Fixed status0 register handling for read/write/format commands. Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Pavel Hrdina 提交于
This bit is cleared on every successful seek to a different track (cylinder). The seek is also called on revalidate or on read/write/format commands which also clear the DSKCHG bit. Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
The new function can be made a bit nicer than bdrv_append. It swaps the whole contents, and then swaps back (using the usual t=a;a=b;b=t idiom) the fields that need to stay on top. Thus, it does not need explicit bdrv_detach_dev, bdrv_iostatus_disable, etc. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
While these should not be in use at the time a transaction is started, a command in the prepare phase of a transaction might have added them, so they need to be brought over. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This makes blkdebug scripts more powerful, and independent of the exact sequence of operations performed by streaming. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This prepares for the next patch, where some active rules may actually not trigger depending on input to readv/writev. Store the active rules in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and fetch the errno/once/immediately arguments from there. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This is required when using blkdebug with raw format. Unlike qcow2/QED, raw asks blkdebug for the length of the file, it doesn't get it from a header. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
These are unused, except (by mistake more or less) in QED. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 MORITA Kazutaka 提交于
The pending list can be modified in other coroutine context sd_co_rw_vector, so we need to traverse the list from the first again after we send the pending request. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 MORITA Kazutaka 提交于
outstanding_list_head is used for both pending and inflight requests. This patch splits it and improves readability. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 MORITA Kazutaka 提交于
This patch increments the pending counter before sending requests, and make sures that aiocb is not freed while sending them. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 MORITA Kazutaka 提交于
This removes blocking network I/Os in coroutine context. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 MORITA Kazutaka 提交于
Currently, no one reenters the yielded coroutine. This fixes it. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 MORITA Kazutaka 提交于
This fixes warnings about dprintf format in debug mode. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
If the image is read-only then it's not possible to copy read data into it. Therefore copy-on-read is automatically disabled for read-only images. Up until now this behavior was silent, add a warning so the user knows why copy-on-read is not working. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
When qcow2_alloc_clusters() error handling code was introduced in commit 5d757b56, the value of free_byte_offset was clobbered in the error case. This patch keeps free_byte_offset at 0 so we will try to allocate clusters again next time this function is called. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
The DEBUG_ALLOC qcow2.h macro enables additional consistency checks throughout the code. This makes it easier to spot corruptions that are introduced during development. Since consistency check is an expensive operation the DEBUG_ALLOC macro is used to compile checks out in normal builds and qcow2_check_refcounts() calls missed the addition of a new function argument. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Gerd Hoffmann 提交于
Replace iso transfer fprintf's with trace points. Also rename existing tracepoints so they all match usb_host_iso_*. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
zero is a valid interface number, so don't use it when resetting the endpoints. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Create a new usb_ep_reset() function to reset endpoint state, without re-initialiting the queues, so we don't unlink in-flight packets just because usb-host has to re-parse the descriptor tables. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Hans de Goede 提交于
Commit 0f588df8, added code to ehci_wakeup to kick the async schedule on wakeup, but the else was positioned wrong making it trigger for devices which are routed to the companion rather then to the ehci controller itself. This patch fixes this. Note that the "programming style" with using the return at the end of the companion block matches how the companion case is handled in the other ports ops, and is done this way for consistency. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Hans de Goede 提交于
hcd-ehci.c is missing an usb_packet_init() call for the ipacket UsbPacket it uses for isoc transfers, triggering an assert (taking the entire vm down) in usb_packet_setup as soon as any isoc transfers are done by a high speed USB device. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Commit 4be23939 makes ehci instantly zap any unlinked queue heads when the guest rings the doorbell. While hacking up uas support this turned out to be a problem. The linux kernel can unlink and instantly relink the very same queue head, thereby killing any async packets in flight. That alone isn't an issue yet, the packet will canceled and resubmitted and everything is fine. We'll run into trouble though in case the async packet is completed already, so we can't cancel it any more. The transaction is simply lost then. usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000 usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0 usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000 usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0 usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f0c2 qtds 29dbce40,29dbc4e0,00000009 usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2 usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: alloc usb_packet_state_change bus 0, port 2, ep 1, packet 0x7f95fdec32e0, state undef -> setup usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: process usb_uas_command dev 2, tag 0x2, lun 0, lun64 00000000-00000000 scsi_req_parsed target 0 lun 0 tag 2 command 42 dir 2 length 16384 scsi_req_parsed_lba target 0 lun 0 tag 2 command 42 lba 5933312 scsi_req_alloc target 0 lun 0 tag 2 scsi_req_continue target 0 lun 0 tag 2 scsi_req_data target 0 lun 0 tag 2 len 16384 usb_uas_scsi_data dev 2, tag 0x2, bytes 16384 usb_uas_write_ready dev 2, tag 0x2 usb_packet_state_change bus 0, port 2, ep 1, packet 0x7f95fdec32e0, state setup -> complete usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: free usb_ehci_qh_ptrs q 0x7f95fdec3210 - QH @ 39c4f0c0: next 39c4f002 qtds 29dbce40,00000001,00000009 usb_ehci_qh_fields QH @ 39c4f0c0 - rl 4, mplen 512, eps 2, ep 2, dev 2 usb_ehci_queue_action q 0x7f95fe5152a0: free usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state async -> complete ^^^ async packets completes. usb_ehci_packet_action q 0x7f95fdec3210 p 0x7f95feba9130: wakeup usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000 usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0 usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000 usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0 usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f002 qtds 29dbc4e0,29dbc8a0,00000009 usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2 usb_ehci_queue_action q 0x7f95fdec3210: free usb_ehci_packet_action q 0x7f95fdec3210 p 0x7f95feba9130: free ^^^ endpoint #2 queue head removed from schedule, doorbell makes ehci zap the queue, the (completed) usb packet is freed too and gets lost. usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f0c2 qtds 00000000,00000001,39c50000 usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0 usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f0c2 qtds 00000000,00000001,39c50000 usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0 usb_ehci_queue_action q 0x7f9600dff570: alloc usb_ehci_qh_ptrs q 0x7f9600dff570 - QH @ 39c4f0c0: next 39c4f122 qtds 29dbce40,00000001,00000009 usb_ehci_qh_fields QH @ 39c4f0c0 - rl 4, mplen 512, eps 2, ep 2, dev 2 usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: alloc usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state undef -> setup usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: process usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state setup -> async usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: async ^^^ linux kernel relinked the queue head, ehci creates a new usb packet, but we should have delivered the completed one instead. usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f002 qtds 29dbc4e0,29dbc8a0,00000009 usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2 So instead of instantly zapping the queue we'll set a flag that the queue needs revalidation in case we'll see it again in the schedule. ehci then checks that the queue head fields addressing / describing the endpoint and the qtd pointer match the cached content before reusing it. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Only write back the dwords the hc is supposed to update. Should not make a difference in theory as the guest must not touch the td while it is active to avoid races. But it is still more correct. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Use ehci_flush_qh to make sure we touch inly the fields the hc is allowed to touch. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 07 7月, 2012 3 次提交
-
-
由 Peter Maydell 提交于
Add functions deposit32(), deposit64(), extract32() and extract64() to extract and deposit bitfields in 32 and 64 bit words. Based on ideas by Jia Liu and Avi Kivity. Suggested-by: NJia Liu <proljc@gmail.com> Suggested-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Rephrase some of the expressions used to select an entry in the SSE op table arrays so that it's clearer that they don't overrun the op table array size. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
The X86_64_DEF macro is a confusing way of making some terms in a conditional only appear if TARGET_X86_64 is defined. We only use it in two places, and in both cases this is for making the same test, so abstract that check out into a function where we can use a more conventional #ifdef. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-