Add a CPU reset handler to have all CPUs in a PoP compliant
state.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: move hw/hw.h into existing ifdef]
Signed-off-by: NAlexander Graf <agraf@suse.de>

The function is only used in misc_helper.c, so move it to that file.

This reduces the size of debug executables (compiled without optimization)
because they get unused code and data for each compilation which includes
cpu.h.

Executables with optimization don't change their size.

ebcdic2ascii is currently unused and could be removed (not done here).

The array ascii2ebcdic must be accessed with an unsigned index, therefore
(int)ascii[i] was replaced by (uint8_t)ascii[i]. The old code would have
failed for a signed char less than 0. The current code only converts
"QEMU" and spaces to EBCDIC, so there is no problem today.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This enables qemu -cpu help to return a list of supported CPU models
on s390 and also to query for cpu definitions in the monitor.
Initially only cpu model = host is returned. This needs to be reworked
into a full-fledged CPU model handling later on.
This change is needed to allow libvirt exploiters (like OpenStack)
to specify a CPU model.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[agraf: fix s390x-linux-user, adjust header locations]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Lets move the code to setup IPL for external kernel
or via the zipl rom into a separate file. This allows to

- define a reboot handler, setting up the PSW appropriately
- enhance the boot code to IPL disks that contain a bootmap that
  was created with zipl under LPAR or z/VM (future patch)
- reuse that code for several machines (e.g. virtio-ccw and virtio-s390)
- allow different machines to provide different defaults
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: symbolify initial psw, adjust header file location, fix for QOM]
Signed-off-by: NAlexander Graf <agraf@suse.de>

IBMs s390 contributions were meant to to be gplv2 or later (since
we were contributing to qemu). Several of the s390 specific files
link to gpl code anyway, so lets clarify the licence statement for
new contributions for those files that we have touched multiple
times or will likely touch again.

This patch does not touch files that mostly deal with tcg.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

# By Wenchao Xia
# Via Luiz Capitulino
* luiz/queue/qmp:
  HMP: add sub command table to info
  HMP: move define of mon_cmds
  HMP: add infrastructure for sub command
  HMP: delete info handler
  HMP: add QDict to info callback handler

Order of arguments of kvm_virtio_pci_irqfd_release
got mixed up in all calls.
As a result users see assertions during cleanup.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a documentation section "Methods" and discuss among others how to
handle overriding virtual methods.

Clarify DeviceClass::realize documentation and refer to the above.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit eb8eb53e5846a957cf333f2e1ec8cb6e0c04 ("libcacard: rewrite
Makefile in non-recursive style") refactored libcacard/Makefile so it
can be included by the top-level Makefile.

The top-level clean target still loops over subdirectories, including
libcacard/, to invoke recursive clean.  Remove libcacard from the
recursive clean since its files are already included at the top level.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

  Now info command takes a table of sub info commands,
and changed do_info() to do_info_help() to do help funtion
only.
 Note that now "info <unknown-topic>" returns error instead
of list of info topics.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

  Because mon_cmds may use info_cmds, so adjust the declare sequence
of them.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

  This patch make parsing of hmp command aware of that it may
have sub command. Also discard simple encapsulation function
monitor_find_command(). For case "@command ", space after
@command is filtered out.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

  Now cmd and info handler have same format, so delete info handler.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

  This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

OpenBSD system compiler (gcc 4.2.1) has problems with concatenation
of macro arguments in macro functions:
  CC    aes.o
In file included from /src/qemu/include/qemu-common.h:126,
                 from /src/qemu/aes.c:30:
/src/qemu/include/qemu/bswap.h: In function 'leul_to_cpu':
/src/qemu/include/qemu/bswap.h:461: warning: implicit declaration of function 'bswapHOST_LONG_BITS'
/src/qemu/include/qemu/bswap.h:461: warning: nested extern declaration of 'bswapHOST_LONG_BITS'

Function leul_to_cpu() is only used in kvm-all.c, so the warnings
are not fatal on OpenBSD without -Werror.

Fix by applying glue(). Also add do {} while(0) wrapping and fix
semicolon use while at it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/chardev.1:
  chardev: add pty chardev support to chardev-add (qmp)
  chardev: add socket chardev support to chardev-add (qmp)
  chardev: add parallel chardev support to chardev-add (qmp)
  chardev: add serial chardev support to chardev-add (qmp)
  chardev: add file chardev support to chardev-add (qmp)
  chardev: add hmp hotplug commands
  chardev: add qmp hotplug commands, with null chardev support
  chardev: reduce chardev ifdef mess a bit
  chardev: fix QemuOpts lifecycle
  chardev: add error reporting for qemu_chr_new_from_opts

The version.o file did not appear explicitly as a dependency, and
this caused clean builds to fail.  Force its build by making the
Makefile depend on version.o.

(We cannot add it to libqemuutil.a, because it doesn't export any
symbol and thus would not be pulled by the linker).

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Tested-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This obsoletes tmp105_set() and allows for better error handling.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduce TYPE_ constant and cast macro.
Move the state struct to the new header to allow for future embedding.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Exercise all four commands of the TMP105, testing for an issue in the
I2C TX path.

The test case uses the N800's OMAP I2C and is the first for ARM.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

An early length postincrement in the TMP105's I2C TX path led to
transfers of more than one byte to place the second byte in the third
byte's place within the buffer and the third byte to get discarded.

Fix this by explictly incrementing the length after the checks but
before the callback is called, which again checks the length.

Adjust the Coding Style while at it.
Signed-off-by: NAlex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allows value sharing with qtest.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This adds a simple I2C API and a driver implementation for omap_i2c.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

sw->name already uses the correct g_free to free the allocated memory.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

scsi_req_new() never returns null, and scsi_req_enqueue() dereferences
the pointer, so checking for null is useless.

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Without this default q35/ppc405 based machines would no longer boot
after commit e4ada29eSigned-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The ptsname is returned directly, so there is no need to
use query-chardev to figure the pty device path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qemu_chr_open_socket is split into two functions.  All initialization
after creating the socket file handler is split away into the new
qemu_chr_open_socket_fd function.

chr->filename doesn't get filled from QemuOpts any more.  Qemu gathers
the information using getsockname and getnameinfo instead.  This way it
will also work correctly for file handles passed via file descriptor
passing.

Finally qmp_chardev_open_socket() is the actual qmp hotplug
implementation which basically just calls socket_listen or
socket_connect and the new qemu_chr_open_socket_fd function.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Also alias the old parport name to parallel for -chardev.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Similar to file, except that no separate in/out files are supported
because it's pointless for direct device access.  Also the special
tty ioctl hooks (pass through linespeed settings etc) are activated
on Unix.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for file chardevs.  Output file is mandatory,
input file is optional.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add chardev-add and chardev-remove commands to the human monitor.
chardev-add accepts the same syntax as -chardev, chardev-remove
expects a chardev id.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add chardev-add and chardev-remove qmp commands.  Hotplugging
a null chardev is supported for now, more will be added later.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qemu_chr_new_from_opts handles QemuOpts release now, so callers don't
have to worry.  It will either be saved in CharDriverState, then
released in qemu_chr_delete, or in the error case released instantly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Introduce the QOM realizefn suggested by Anthony.
Detailed documentation is supplied in the qdev header.

For now this implements a default DeviceClass::realize callback that
just wraps DeviceClass::init, which it deprecates.
Once all devices have been converted to DeviceClass::realize,
DeviceClass::init is to be removed.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Whether the device was initialized or not is QOM-level information and
currently unused. Drop it from device. This leaves the boolean state of
whether or not DeviceClass::init was called or not, a.k.a. "realized".
Suggested-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>