- 06 1月, 2020 2 次提交
-
-
由 Peter Maydell 提交于
x86 and machine queue, 2019-12-20 Bug fix: * Resolve CPU models to v1 by default (Eduardo Habkost) Cleanup: * Remove incorrect numa_mem_supported checks (Igor Mammedov) # gpg: Signature made Fri 20 Dec 2019 19:19:02 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: numa: properly check if numa is supported numa: remove not needed check i386: Resolve CPU models to v1 by default Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Require Python >= 3.5 to build QEMU Python 2 EOL is 11 days away, we will stop supporting it in QEMU 5.0. # gpg: Signature made Fri 20 Dec 2019 16:49:02 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/python-next-pull-request: configure: Require Python >= 3.5 travis: Replace Python 3.4 build with 3.5 Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 04 1月, 2020 3 次提交
-
-
由 Peter Maydell 提交于
target-arm queue: * Support emulating the generic timers at frequencies other than 62.5MHz * Various fixes for SMMUv3 emulation bugs * Improve assert error message for hflags mismatches * arm-powerctl: rebuild hflags after setting CP15 bits in arm_set_cpu_on() # gpg: Signature made Fri 20 Dec 2019 14:25:51 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20191220: arm/arm-powerctl: rebuild hflags after setting CP15 bits in arm_set_cpu_on() target/arm: Display helpful message when hflags mismatch hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word position hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro hw/arm/smmuv3: Align stream table base address to table size hw/arm/smmuv3: Check stream IDs against actual table LOG2SIZE hw/arm/smmuv3: Correct SMMU_BASE_ADDR_MASK value hw/arm/smmuv3: Apply address mask to linear strtab base address ast2600: Configure CNTFRQ at 1125MHz target/arm: Prepare generic timer for per-platform CNTFRQ target/arm: Abstract the generic timer frequency target/arm: Remove redundant scaling of nexttick Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Pull request # gpg: Signature made Fri 20 Dec 2019 10:25:11 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: virtio-blk: fix out-of-bounds access to bitmap in notify_guest_bh docs: fix rst syntax errors in unbuilt docs virtio-blk: deprecate SCSI passthrough Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
seabios: update to 1.13.0 final # gpg: Signature made Fri 20 Dec 2019 06:07:53 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/seabios-20191220-pull-request: seabios: update to 1.13.0 final Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 03 1月, 2020 1 次提交
-
-
由 Peter Maydell 提交于
vga: two little bugfixes. # gpg: Signature made Fri 20 Dec 2019 06:06:04 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20191220-pull-request: display/bochs-display: fix memory leak vhost-user-gpu: Drop trailing json comma Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 21 12月, 2019 4 次提交
-
-
由 Peter Maydell 提交于
Block layer patches: - qemu-img: fix info --backing-chain --image-opts - Error out on image creation with conflicting size options - Fix external snapshot with VM state - hmp: Allow using qdev ID for qemu-io command - Misc code cleanup - Many iotests improvements # gpg: Signature made Thu 19 Dec 2019 17:23:11 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (30 commits) iotests: Test external snapshot with VM state hmp: Allow using qdev ID for qemu-io command block: Activate recursively even for already active nodes iotests: 211: Remove duplication with VM.blockdev_create() iotests: 207: Remove duplication with VM.blockdev_create() iotests: 266: Convert to VM.blockdev_create() iotests: 237: Convert to VM.blockdev_create() iotests: 213: Convert to VM.blockdev_create() iotests: 212: Convert to VM.blockdev_create() iotests: 210: Convert to VM.blockdev_create() iotests: 206: Convert to VM.blockdev_create() iotests: 255: Drop blockdev_create() iotests: Create VM.blockdev_create() qcow2: Move error check of local_err near its assignment iotests: Fix IMGOPTSSYNTAX for nbd iotests/273: Filter format-specific information iotests: Add more "_require_drivers" checks to the shell-based tests MAINTAINERS: fix qcow2-bitmap.c under Dirty Bitmaps header qcow2: Use offset_into_cluster() iotests: Support job-complete in run_job() ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Eduardo Habkost 提交于
Python 3.5 is the oldest Python version available on our supported build platforms, and Python 2 end of life will be 3 weeks after the planned release date of QEMU 4.2.0. Drop Python 2 support from configure completely, and require Python 3.5 or newer. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20191016224237.26180-1-ehabkost@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
We'll start requiring Python 3.5 to build QEMU. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Peter Maydell 提交于
More s390x patches: - tcg: implement LOAD/STORE TO REAL ADDRESS inline - fixes in tests, the bios, and diag308 handling # gpg: Signature made Thu 19 Dec 2019 10:53:19 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20191219: s390x: Properly fetch and test the short psw on diag308 subc 0/1 pc-bios/s390: Update firmware images pc-bios/s390x: Fix reset psw mask tests/boot-sector: Fix the bad s390x assembler code target/s390x: Implement LOAD/STORE TO REAL ADDRESS inline target/s390x: Split out helper_per_store_real Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 20 12月, 2019 27 次提交
-
-
由 Niek Linnenbank 提交于
After setting CP15 bits in arm_set_cpu_on() the cached hflags must be rebuild to reflect the changed processor state. Without rebuilding, the cached hflags would be inconsistent until the next call to arm_rebuild_hflags(). When QEMU is compiled with debugging enabled (--enable-debug), this problem is captured shortly after the first call to arm_set_cpu_on() for CPUs running in ARM 32-bit non-secure mode: qemu-system-arm: target/arm/helper.c:11359: cpu_get_tb_cpu_state: Assertion `flags == rebuild_hflags_internal(env)' failed. Aborted (core dumped) Fixes: 0c7f8c43 Cc: qemu-stable@nongnu.org Signed-off-by: NNiek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Philippe Mathieu-Daudé 提交于
Instead of crashing in a confuse way, give some hint to the user about why we aborted. He might report the issue without having to use a debugger. Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191209134552.27733-1-philmd@redhat.com Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Tested-by: NNiek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Simon Veith 提交于
The smmuv3_record_event() function that generates the F_STE_FETCH error uses the EVT_SET_ADDR macro to record the fetch address, placing it in 32-bit words 4 and 5. The correct position for this address is in words 6 and 7, per the SMMUv3 Architecture Specification. Update the function to use the EVT_SET_ADDR2 macro instead, which is the macro intended for writing to these words. ref. ARM IHI 0070C, section 7.3.4. Signed-off-by: NSimon Veith <sveith@amazon.de> Acked-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-7-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Simon Veith 提交于
The bit offsets in the EVT_SET_ADDR2 macro do not match those specified in the ARM SMMUv3 Architecture Specification. In all events that use this macro, e.g. F_WALK_EABT, the faulting fetch address or IPA actually occupies the 32-bit words 6 and 7 in the event record contiguously, with the upper and lower unused bits clear due to alignment or maximum supported address bits. How many bits are clear depends on the individual event type. Update the macro to write to the correct words in the event record so that guest drivers can obtain accurate address information on events. ref. ARM IHI 0070C, sections 7.3.12 through 7.3.16. Signed-off-by: NSimon Veith <sveith@amazon.de> Acked-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-6-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Simon Veith 提交于
Per the specification, and as observed in hardware, the SMMUv3 aligns the SMMU_STRTAB_BASE address to the size of the table by masking out the respective least significant bits in the ADDR field. Apply this masking logic to our smmu_find_ste() lookup function per the specification. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: NSimon Veith <sveith@amazon.de> Acked-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-5-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Simon Veith 提交于
When checking whether a stream ID is in range of the stream table, we have so far been only checking it against our implementation limit (SMMU_IDR1_SIDSIZE). However, the guest can program the STRTAB_BASE_CFG.LOG2SIZE field to a size that is smaller than this limit. Check the stream ID against this limit as well to match the hardware behavior of raising C_BAD_STREAMID events in case the limit is exceeded. Also, ensure that we do not go one entry beyond the end of the table by checking that its index is strictly smaller than the table size. ref. ARM IHI 0070C, section 6.3.24. Signed-off-by: NSimon Veith <sveith@amazon.de> Acked-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-4-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Simon Veith 提交于
There are two issues with the current value of SMMU_BASE_ADDR_MASK: - At the lower end, we are clearing bits [4:0]. Per the SMMUv3 spec, we should also be treating bit 5 as zero in the base address. - At the upper end, we are clearing bits [63:48]. Per the SMMUv3 spec, only bits [63:52] must be explicitly treated as zero. Update the SMMU_BASE_ADDR_MASK value to mask out bits [63:52] and [5:0]. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: NSimon Veith <sveith@amazon.de> Acked-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-3-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Simon Veith 提交于
In the SMMU_STRTAB_BASE register, the stream table base address only occupies bits [51:6]. Other bits, such as RA (bit [62]), must be masked out to obtain the base address. The branch for 2-level stream tables correctly applies this mask by way of SMMU_BASE_ADDR_MASK, but the one for linear stream tables does not. Apply the missing mask in that case as well so that the correct stream base address is used by guests which configure a linear stream table. Linux guests are unaffected by this change because they choose a 2-level stream table layout for the QEMU SMMUv3, based on the size of its stream ID space. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: NSimon Veith <sveith@amazon.de> Acked-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-2-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Andrew Jeffery 提交于
This matches the configuration set by u-boot on the AST2600. Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Reviewed-by: NCédric Le Goater <clg@kaod.org> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 080ca1267a09381c43cf3c50d434fb6c186f2b6e.1576215453.git-series.andrew@aj.id.au Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Andrew Jeffery 提交于
The ASPEED AST2600 clocks the generic timer at the rate of HPLL. On recent firmwares this is at 1125MHz, which is considerably quicker than the assumed 62.5MHz of the current generic timer implementation. The delta between the value as read from CNTFRQ and the true rate of the underlying QEMUTimer leads to sticky behaviour in AST2600 guests. Add a feature-gated property exposing CNTFRQ for ARM CPUs providing the generic timer. This allows platforms to configure CNTFRQ (and the associated QEMUTimer) to the appropriate frequency prior to starting the guest. As the platform can now determine the rate of CNTFRQ we're exposed to limitations of QEMUTimer that didn't previously materialise: In the course of emulation we need to arbitrarily and accurately convert between guest ticks and time, but we're constrained by QEMUTimer's use of an integer scaling factor. The effect is QEMUTimer cannot exactly capture the period of frequencies that do not cleanly divide NANOSECONDS_PER_SECOND for scaling ticks to time. As such, provide an equally inaccurate scaling factor for scaling time to ticks so at least a self-consistent inverse relationship holds. Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: a22db9325f96e39f76e3c2baddcb712149f46bf2.1576215453.git-series.andrew@aj.id.au Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Andrew Jeffery 提交于
Prepare for SoCs such as the ASPEED AST2600 whose firmware configures CNTFRQ to values significantly larger than the static 62.5MHz value currently derived from GTIMER_SCALE. As the OS potentially derives its timer periods from the CNTFRQ value the lack of support for running QEMUTimers at the appropriate rate leads to sticky behaviour in the guest. Substitute the GTIMER_SCALE constant with use of a helper to derive the period from gt_cntfrq_hz stored in struct ARMCPU. Initially set gt_cntfrq_hz to the frequency associated with GTIMER_SCALE so current behaviour is maintained. Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 40bd8df043f66e1ccfb3e9482999d099ac72bb2e.1576215453.git-series.andrew@aj.id.au Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Andrew Jeffery 提交于
The corner-case codepath was adjusting nexttick such that overflow wouldn't occur when timer_mod() scaled the value back up. Remove a use of GTIMER_SCALE and avoid unnecessary operations by calling timer_mod_ns() directly. Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Reviewed-by: NCédric Le Goater <clg@kaod.org> Message-id: f8c680720e3abe55476e6d9cb604ad27fdbeb2e0.1576215453.git-series.andrew@aj.id.au Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Various testing and logging updates - test tci with Travis - enable multiarch testing in Travis - default to out-of-tree builds - make changing logfile safe via RCU - remove redundant tests - remove gtester test from docker - convert DEBUG_MMAP to tracepoints - remove hand rolled glob function - trigger tcg re-configure when needed # gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits) tests/tcg: ensure we re-configure if configure.sh is updated trace: replace hand-crafted pattern_glob with g_pattern_match_simple linux-user: convert target_munmap debug to a tracepoint linux-user: log page table changes under -d page linux-user: add target_mmap_complete tracepoint linux-user: convert target_mmap debug to tracepoint linux-user: convert target_mprotect debug to tracepoint travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry docker: gtester is no longer used Added tests for close and change of logfile. Add use of RCU for qemu_logfile. qemu_log_lock/unlock now preserves the qemu_logfile handle. Add a mutex to guarantee single writer to qemu_logfile handle. Cleaned up flow of code in qemu_set_log(), to simplify and clarify. Fix double free issue in qemu_set_log_filename(). ci: build out-of-tree travis.yml: Enable builds on arm64, ppc64le and s390x tests/test-util-filemonitor: Skip test on non-x86 Travis containers tests/hd-geo-test: Skip test when images can not be created iotests: Skip test 079 if it is not possible to create large files ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Trivial fixes (20191218) # gpg: Signature made Wed 18 Dec 2019 13:00:34 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: qemu-doc: Remove the unused "Guest Agent" node Revert "qemu-options.hx: Update for reboot-timeout parameter" target/sparc: Remove old TODO file test-keyval: Tighten test of trailing crap after size util/cutils: Turn FIXME comment into QEMU_BUILD_BUG_ON() monitor: Remove unused define MAINTAINERS: Add hw/sd/ssi-sd.c in the SD section Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* More uses of RCU_READ_LOCK_GUARD (Dave, myself) * QOM doc improvments (Greg) * Cleanups from the Meson conversion (Marc-André) * Support for multiple -accel options (myself) * Many x86 machine cleanup (Philippe, myself) * tests/migration-test cleanup (Juan) * PC machine removal and next round of deprecation (Thomas) * kernel-doc integration (Peter, myself) # gpg: Signature made Wed 18 Dec 2019 01:35:02 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (87 commits) vga: cleanup mapping of VRAM for non-PCI VGA hw/display: Remove "rombar" hack from vga-pci and vmware_vga hw/pci: Remove the "command_serr_enable" property hw/audio: Remove the "use_broken_id" hack from the AC97 device hw/i386: Remove the deprecated machines 0.12 up to 0.15 hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge hw/pci-host/i440fx: Extract the IGD passthrough host bridge device hw/pci-host/i440fx: Use definitions instead of magic values hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE() hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h" hw/pci-host/i440fx: Correct the header description Fix some comment spelling errors. target/i386: remove unused pci-assign codes WHPX: refactor load library migration: check length directly to make sure the range is aligned memory: include MemoryListener documentation and some missing function parameters docs: add memory API reference memory.h: Silence kernel-doc complaints docs: Create bitops.rst as example of kernel-docs bitops.h: Silence kernel-doc complaints ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Gerd Hoffmann 提交于
Update to the final 1.13 release. No code changes. git shortlog ============ Kevin O'Connor (1): docs: Note v1.13.0 release Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Cameron Esfahani 提交于
Fix memory leak in bochs_display_update(). Leaks 304 bytes per frame. Fixes: 33ebad54Signed-off-by: NCameron Esfahani <dirty@apple.com> Message-Id: <d6c26e68db134c7b0c7ce8b61596ca2e65e01e12.1576013209.git.dirty@apple.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Cole Robinson 提交于
Trailing comma is not valid json: $ cat contrib/vhost-user-gpu/50-qemu-gpu.json.in | jq parse error: Expected another key-value pair at line 5, column 1 Signed-off-by: NCole Robinson <crobinso@redhat.com> Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NLi Qiang <liq3ea@gmail.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-id: 7f5dd2ac9f3504e2699f23e69bc3d8051b729832.1568925097.git.crobinso@redhat.com Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Igor Mammedov 提交于
Commit aa570207, by mistake used MachineClass::numa_mem_supported to check if NUMA is supported by machine and also as unrelated change set it to true for sbsa-ref board. Luckily change didn't break machines that support NUMA, as the field is set to true for them. But the field is not intended for checking if NUMA is supported and will be flipped to false within this release for new machine types. Fix it: - by using previously used condition !mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id the first time and then use MachineState::numa_state down the road to check if NUMA is supported - dropping stray sbsa-ref chunk Fixes: aa570207Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-3-git-send-email-imammedo@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Igor Mammedov 提交于
Currently parse_numa_node() is always called from already numa enabled context. Drop unnecessary check if numa is supported. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-2-git-send-email-imammedo@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
When using `query-cpu-definitions` using `-machine none`, QEMU is resolving all CPU models to their latest versions. The actual CPU model version being used by another machine type (e.g. `pc-q35-4.0`) might be different. In theory, this was OK because the correct CPU model version is returned when using the correct `-machine` argument. Except that in practice, this breaks libvirt expectations: libvirt always use `-machine none` when checking if a CPU model is runnable, because runnability is not expected to be affected when the machine type is changed. For example, when running on a Haswell host without TSX, Haswell-v4 is runnable, but Haswell-v1 is not. On those hosts, `query-cpu-definitions` says Haswell is runnable if using `-machine none`, but Haswell is actually not runnable using any of the `pc-*` machine types (because they resolve Haswell to Haswell-v1). In other words, we're breaking the "runnability guarantee" we promised to not break for a few releases (see qemu-deprecated.texi). To address this issue, change the default CPU model version to v1 on all machine types, so we make `query-cpu-definitions` output when using `-machine none` match the results when using `pc-*`. This will change in the future (the plan is to always return the latest CPU model version if using `-machine none`), but only after giving libvirt the opportunity to adapt. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1779078Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20191205223339.764534-1-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Kevin Wolf 提交于
This tests creating an external snapshot with VM state (which results in an active overlay over an inactive backing file, which is also the root node of an inactive BlockBackend), re-activating the images and performing some operations to test that the re-activation worked as intended. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
In order to issue requests on an existing BlockBackend with the 'qemu-io' HMP command, allow specifying the BlockBackend not only with a BlockBackend name, but also with a qdev ID/QOM path for a device that owns the (possibly anonymous) BlockBackend. Because qdev names could be conflicting with BlockBackend and node names, introduce a -d option to explicitly address a device. If the option is not given, a BlockBackend or a node is addressed. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
bdrv_invalidate_cache_all() assumes that all nodes in a given subtree are either active or inactive when it starts. Therefore, as soon as it arrives at an already active node, it stops. However, this assumption is wrong. For example, it's possible to take a snapshot of an inactive node, which results in an active overlay over an inactive backing file. The active overlay is probably also the root node of an inactive BlockBackend (blk->disable_perm == true). In this case, bdrv_invalidate_cache_all() does not need to do anything to activate the overlay node, but it still needs to recurse into the children and the parents to make sure that after returning success, really everything is activated. Cc: qemu-stable@nongnu.org Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Li Hangjing 提交于
When the number of a virtio-blk device's virtqueues is larger than BITS_PER_LONG, the out-of-bounds access to bitmap[ ] will occur. Fixes: e21737ab ("virtio-blk: multiqueue batch notify") Cc: qemu-stable@nongnu.org Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NLi Hangjing <lihangjing@baidu.com> Reviewed-by: NXie Yongji <xieyongji@baidu.com> Reviewed-by: NChai Wen <chaiwen@baidu.com> Message-id: 20191216023050.48620-1-lihangjing@baidu.com Message-Id: <20191216023050.48620-1-lihangjing@baidu.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
The .rst files outside docs/{devel,interop,specs} aren't built yet and therefore a few syntax errors have slipped through. Fix them. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Message-Id: <20191111094411.427174-1-stefanha@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
The Linux virtio_blk.ko guest driver is removing legacy SCSI passthrough support. Deprecate this feature in QEMU too. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NThomas Huth <thuth@redhat.com> Message-id: 20191213144626.1208237-1-stefanha@redhat.com Message-Id: <20191213144626.1208237-1-stefanha@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 19 12月, 2019 3 次提交
-
-
由 Kevin Wolf 提交于
The blockdev_create() function in this test case adds an error check that skips the test in case of failure because of memory shortage, but provides otherwise the same functionality as VM.blockdev_create() from iotests.py. Make it a thin wrapper around the iotests.py function. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
The blockdev_create() function in this test case adds another filter to the logging, but provides otherwise the same functionality as VM.blockdev_create() from iotests.py. Make it a thin wrapper around the iotests.py function. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Instead of having a separate blockdev_create() function, make use of the VM.blockdev_create() offered by iotests.py. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-