Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See also facd2857 and
34005a00.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

registrs -> registers
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Get page size in device init.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.

Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.

Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The extlh instruction on Alpha currently doesn't work properly.
It's a combination of a cut/paste bug (16 where it should be 32) as well
as a "shift by 64" bug.
Signed-off-by: NVince Weaver <vince@csl.cornell.edu>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Remove a temp local variable and a jump by computing a mask with shifts.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Nmalc <av1474@comtv.ru>

pcm_ops.run_out now takes number of live samples (which will be always
greater than zero) as a second argument, every driver was calling
audio_pcm_hw_get_live_out anyway with exception of fmod which used
audio_pcm_hw_get_live_out2 for no good reason.
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

t0, t1 must be 64 bit values, not 32 bit.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Well one problem seems to be the rx condition,
        ... if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR))
is not enough to trigger an irq, yet still causes the following
conditions not to be checked anymore at all.
Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de>
Acked-by: NJan Kiszka <jan.kiszka@web.de>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The logic of Zilog makes channel B the first device and channel A the
second one.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

With this patch applied ide drives (when attached to a pci adapter) can
be created via -device, like this:

  -drive if=none,id=mydisk,file=/path/to/disk.img
  -device ide-drive,drive=mydisk,bus=ide.0,unit=0

Note that creating a master on ide1 doesn't work that way.  That is a
side effect of qemu creating a cdrom automagically even if you don't
ask for it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This allows the ide bus being initialized without drives attached
and the drives being attached and initialization later on as
separate step.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Like pci_create_simple() but doesn't call qdev_init(), so one can
set properties before initializing the device.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The serial ports should be present even if associated with a null device
as some firmware wants to initialize them.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When creating null devices, there is no way to ensure the unicity of
the labels. Bail out with an error message instead.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>