This patch includes modifications of common cpu files. All interrupts and
exceptions occured during recording are written into the replay log.
These events allow correct replaying the execution by kicking cpu thread
when one of these events is found in the log.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162416.8676.57647.stgit@PASHA-ISP.def.inno>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds calls to replay functions into the icount setup block.
In record mode number of executed instructions is written to the log.
In replay mode number of istructions to execute is taken from the replay log.
When replayed instructions counter is expired qemu_notify_event()
function is called to wake up the iothread.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162405.8676.31890.stgit@PASHA-ISP.def.inno>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch is required for deterministic replay to generate an exception
by trying executing an instruction without changing icount.
It adds new flag to TB for disabling icount while translating it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162359.8676.77011.stgit@PASHA-ISP.def.inno>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds icount event to the replay subsystem. This event corresponds
to execution of several instructions and used to synchronize input events
in the replay phase.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162354.8676.31351.stgit@PASHA-ISP.def.inno>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This mutex will protect read/write operations for replay log.
Using mutex is necessary because most of the events consist of
several fields stored in the log. The mutex will help to avoid races.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162348.8676.8628.stgit@PASHA-ISP.def.inno>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds functions to perform read and write operations
with replay log.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162342.8676.29445.stgit@PASHA-ISP.def.inno>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds global variables, defines, function declarations,
and function stubs for deterministic VM replay used by external modules.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

migration/next for 20151104

# gpg: Signature made Wed 04 Nov 2015 12:45:19 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"

* remotes/juanquintela/tags/migration/20151104:
  migration: fix analyze-migration.py script
  migration: code clean up
  migration: rename cancel to cleanup in SaveVMHandles
  migration: rename qemu_savevm_state_cancel
  migration: defer migration_end & blk_mig_cleanup
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vl.c: Error message rework

# gpg: Signature made Tue 03 Nov 2015 08:40:50 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-error-2015-11-03:
  vl.c: Use "%s support is disabled" error messages consistently
  vl.c: Improve warnings on use of deprecated options
  vl.c: Touch up error messages
  vl.c: Remove unnecessary uppercase in error messages
  vl.c: Use "warning:" prefix consistently on warnings
  vl.c: Remove periods and exclamation points from error messages
  vl.c: Replace fprintf(stderr) with error_report()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 61964 "Add configuration section" broke the analyze-migration.py script
which terminates due to the unrecognised section. Fix the script by parsing
the contents of the configuration section directly into a new
ConfigurationSection object (although nothing is done with it yet).
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3

Just clean up code, no behavior change.
Signed-off-by: NLiang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3

'cleanup' seems more appropriate than 'cancel'.
Signed-off-by: NLiang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3

The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: NLiang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3

Because of the patch 3ea3b7fa9af067982f34b of kvm, which introduces a
lazy collapsing of small sptes into large sptes mechanism, now
migration_end() is a time consuming operation because it calls
memroy_global_dirty_log_stop(), which will trigger the dropping of small
sptes operation and takes about dozens of milliseconds, so call
migration_end() before all the vmsate data has already been transferred
to the destination will prolong VM downtime. This operation should be
deferred after all the data has been transferred to the destination.

blk_mig_cleanup() can be deferred too.

For a VM with 8G RAM, this patch can reduce the VM downtime about 30 ms.
Signed-off-by: NLiang Li <liang.z.li@intel.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3

target-arm queue:
 * code cleanup to use symbolic constants for register bank numbers
 * fix direct booting of modern Linux kernels on xilinx_zynq by setting
   SCLR values to what the kernel expects firmware to have done
 * implement SYSRESETREQ for ARMv7M CPU (stellaris boards)
 * update MAINTAINERS to mention new qemu-arm mailing list
 * clean up display of PSTATE in AArch64 debug logs
 * report Secure/Nonsecure status in CPU debug logs
 * fix a missing _CCA attribute in ACPI tables
 * add support for GICv3 to ACPI tables

# gpg: Signature made Tue 03 Nov 2015 13:58:46 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20151103:
  ARM: ACPI: Fix MPIDR value in ACPI table
  hw/arm/virt-acpi-build: Add GICC ACPI subtable for GICv3
  hw/arm/virt-acpi-build: _CCA attribute is compulsory
  target-arm: Report S/NS status in the CPU debug logs
  target-arm: Bring AArch64 debug CPU display of PSTATE into line with AArch32
  MAINTAINERS: Add new qemu-arm mailing list to ARM related entries
  arm: stellaris: exit on external reset request
  armv7-m: Implement SYSRESETREQ
  armv7-m: Return DeviceState* from armv7m_init()
  arm: xilinx_zynq: Add linux pre-boot
  arm: boot: Add board specific setup code API
  arm: boot: Adjust indentation of FIXUP comments
  target-arm: Add and use symbolic names for register banks
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: two bugfixes for ehci & usb-host.

# gpg: Signature made Tue 03 Nov 2015 10:57:28 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20151103-1:
  usb-host: fix usb3ep0quirk test
  ehci: clear suspend bit on detach
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use mp_affinity of ARMCPU as the CPU MPIDR instead of the CPU index.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446285001-7316-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When booting VM with GICv3, the kernel needs GICC ACPI subtable to
initialize the CPUs, e.g. MPIDR information. This adds GICC ACPI
subtable for GICv3, but set GICC base address only when gic_version == 2
since it donesn't need GICC base address for GICv3.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446131773-5018-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

According to ACPI specification 6.2.17 _CCA (Cache Coherency Attribute)
this attribute is compulsory on ARM systems. Add this attribute to
the PCI host bridges as required.

Without this the kernel will produce the error
[Firmware Bug]: PCI device 0000:00:00.0 fail to setup DMA.
Signed-off-by: NGraeme Gregory <graeme.gregory@linaro.org>
Message-id: 1446460786-13663-1-git-send-email-graeme.gregory@linaro.org
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If this CPU supports EL3, enhance the printing of the current
CPU mode in debug logging to distinguish S from NS modes as
appropriate.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1445883178-576-3-git-send-email-peter.maydell@linaro.org

The AArch64 debug CPU display of PSTATE as "PSTATE=200003c5 (flags --C-)"
on the end of the same line as the last of the general purpose registers
is unnecessarily different from the AArch32 display of PSR as
"PSR=200001d3 --C- A svc32" on its own line. Update the AArch64
code to put PSTATE in its own line and in the same format, including
printing the exception level (mode).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1445883178-576-2-git-send-email-peter.maydell@linaro.org

We now have a qemu-arm mailing list for ARM patches and discussion,
so add an L: entry for it to the various ARM related entries in
MAINTAINERS.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1446129661-5239-1-git-send-email-peter.maydell@linaro.org

Add GPIO in for the stellaris board which calls
qemu_system_reset_request() on reset request.
Signed-off-by: NMichael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the SYSRESETREQ bit of the AIRCR register
for armv7-m (ie. cortex-m3) to trigger a GPIO out.
Signed-off-by: NMichael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.
Signed-off-by: NMichael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a Linux-specific pre-boot routine that matches the device-
specific bootloaders behaviour. This is needed for modern Linux that
expects the ARM PLL in SLCR to be a more even value (not 26).

Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add an API for boards to inject their own preboot software (or
firmware) sequence.

The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).

The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).

Rewrite the comment for the primary boot blob.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

These comments start immediately after the current longest name in the
list. Tab them out to the next tab stop to give a little breathing room
and prepare for FIXUP_BOARD_SETUP which will require more indent.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: b9b9bb8f1c307c1ef8a3f26ff1f34fabb34b332e.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add BANK_<cpumode> #defines to index banked registers.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb->speed is the usb speed the device is actually running on in the
qemu emulation (i.e. from the guests point of view).  So when plugging
usb3 devices into ehci hostadapter this is HIGH not SUPER.

To figure whenever the host talks to the device with superspeed we
have to check speedmask instead and see whenever the superspeed bit
is set there.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1445603230-11840-1-git-send-email-kraxel@redhat.com

When a device is detached, clear the suspend bit (PORTSC_SUSPEND)
in the port status register.

The specs are not *that* clear what is supposed to happen in case
a suspended device is unplugged.  But the enable bit (PORTSC_PED)
is cleared, and the specs mention setting suspend with enable being
unset is undefined behavior.  So clearing them both looks reasonable,
and it actually fixes the reported bug.

https://bugzilla.redhat.com/show_bug.cgi?id=1268879

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1445413462-18004-1-git-send-email-kraxel@redhat.com

ui: fixes for vnc, opengl and curses.

# gpg: Signature made Tue 03 Nov 2015 09:53:24 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-ui-20151103-1:
  vnc: fix bug: vnc server can't start when 'to' is specified
  vnc: allow fall back to RAW encoding
  ui/opengl: Reduce build required libraries for opengl
  ui/curses: Fix pageup/pagedown on -curses
  ui/curses: Support line graphics chars on -curses mode
  ui/curses: Fix monitor color with -curses when 256 colors
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

commit e0d03b8c converted VNC startup to use SocketAddress,
the interface socket_listen don't have a port_offset param, so
we need to add the port offset (5900) to both 'port' and 'to' opts.
currently only 'port' is added by offset.
This patch add the port offset to 'to' opts.
Signed-off-by: NYang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1445926252-14830-1-git-send-email-hongyang.yang@easystack.cn
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

I have observed that depending on the contents and the encoding it happens
that sending data as RAW sometimes would take less space than the encoded data.
This is especially the case for small updates or areas with high color images.
If sending RAW encoded data is beneficial allow a fall back to RAW encoding
for the framebuffer update.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

We now use epoxy to load opengl libraries. This means we don't need to
link opengl libraries directly if interfaces handled by epoxy. With
this, we just need epoxy headers and epoxy's *.so to build.

Tested with epoxy-1.3.1.

- sdl2/gtk/console egl stuff doesn't require other than epoxy
- milkymist-tmu2 glx stuff doesn't require other than epoxy

(lm32 test is limited, because can't find mmone-bios.bin, so just test
to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest")
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

[ lm32 tested by kraxel ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Current KEY_NPAGE/KEY_PPAGE handling is broken on -curses. Those uses
"GREY", but "KEY_MASK" masked out "GREY".

To fix, we have to use correct mask value - SCANCODE_KEYMASK.

Then, this adds support of "shift + pageup/pagedown". With this,
-curses mode can use scroll-up/down as usual like other display modes.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This converts vga code to curses code in console_write_bh().

With this changes, we can see line graphics (for example, dialog uses)
correctly.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If TERM=xterm-256color, COLOR_PAIRS==256 and monitor passes chtype
like 0x74xx. Then, the code uses uninitialized color pair. As result,
monitor uses black for both of fg and bg color, i.e. terminal is
filled by black.

To fix, this initialize above than 64 with default color (fg=white,bg=black).

FIXME: on 256 color, curses may be possible better vga color emulation.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-12-git-send-email-ehabkost@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Simplify warnings about deprecated options by rewriting them as
"warning: ignoring deprecated option".

Reword -no-kvm-pit-reinjection deprecation warning.
Suggested-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-10-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-11-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>