- 05 8月, 2012 3 次提交
-
-
由 Richard Henderson 提交于
We weren't aggregating the exceptions, nor raising signals properly. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Proper signal numbers were not defined, and EXCP_INTERRUPT was unhandled, leading to all sorts of subtle confusion. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
- 04 8月, 2012 11 次提交
-
-
由 Dunrong Huang 提交于
More details: http://buildbot.b1-systems.de/qemu/builders/xen_unstable/builds/83/steps/compile/logs/stdio VLANState has been removed since commit a005d073, so "vlan id" should be fetched using net_hub_id_for_client(). Signed-off-by: NDunrong Huang <riegamaths@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Commit 0f66998f makes -enable-fips conditional on Linux hosts but then uses it unconditionally in vl.c. Fix this by moving the fips handling to os-posix.c and adding a condition. Cc: Paul Moore <pmoore@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* bonzini/scsi-next: scsi: add support for ATA_PASSTHROUGH_xx scsi command esp: add missing const on TypeInfo structures esp: enable for all PCI machines Revert "megasas: disable due to build breakage" megasas: static SAS addresses scsi-disk: fix compilation with DEBUG_SCSI megasas: Update function megasys_scsi_uninit SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0 SCSI: Update the sense code for PREVENT REMOVAL errors
-
由 Cong Meng 提交于
Correct the command names of opcode 0x85 and 0xa1, and calculate their xfer size from CDB. Signed-off-by: NCong Meng <mc@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paul Moore 提交于
FIPS 140-2 requires disabling certain ciphers, including DES, which is used by VNC to obscure passwords when they are sent over the network. The solution for FIPS users is to disable the use of VNC password auth when the host system is operating in FIPS compliance mode and the user has specified '-enable-fips' on the QEMU command line. This patch causes QEMU to emit a message to stderr when the host system is running in FIPS mode and a VNC password was specified on the commend line. If the system is not running in FIPS mode, or is running in FIPS mode but VNC password authentication was not requested, QEMU operates normally. Signed-off-by: NPaul Moore <pmoore@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* qmp/queue/qmp: hmp: show the backing file depth block: Use bdrv_get_backing_file_depth() block: create bdrv_get_backing_file_depth() qapi: qapi.py: allow the "'" character to be escaped
-
由 Anthony Liguori 提交于
* afaerber-or/qom-cpu-4: cpu: Move thread_kicked to CPUState cpu: Move thread field into CPUState cpu: Move CPU_COMMON_THREAD into CPUState qemu-thread: Let qemu_thread_is_self() return bool
-
由 Anthony Liguori 提交于
* sstabellini/xen-fixes-20120801: fix Xen compilation configure: Fix xen probe with Xen 4.2 and later
-
由 Anthony Liguori 提交于
* stefanha/net: net: add the support for -netdev socket, listen net: fix the coding style hub: add the support for hub own flow control net: determine if packets can be sent before net queue deliver packets net: cleanup deliver/deliver_iov func pointers net: Make "info network" output more readable info net: Rename qemu_del_vlan_client() to qemu_del_net_client() net: Rename vc local variables to nc net: Rename VLANClientState to NetClientState net: Rename non_vlan_clients to net_clients net: Remove VLANState net: Remove vlan code from net.c net: Convert qdev_prop_vlan to peer with hub net: Drop vlan argument to qemu_new_net_client() hub: Check that hubs are configured correctly net: Look up 'vlan' net clients using hubs net: Use hubs for the vlan feature net: Add a hub net client net: Add interface to bridge when SIOCBRADDIF isn't available
-
由 Anthony Liguori 提交于
* stefanha/trivial-patches: exec.c: Remove out of date comment exec.c: Use subpages for large unaligned mappings exec.c: Fix off-by-one error in register_subpage socket: clean up redundant assignment qom: Clean libuser object and dependency files usb: Clean common object and dependency files
-
由 Anthony Liguori 提交于
* aneesh/for-upstream: hw/9pfs: Fix assert when disabling migration configure: Fix build with capabilities
-
- 03 8月, 2012 22 次提交
-
-
由 Peter Maydell 提交于
Remove an out of date comment: this comment used to be attached to cpu_register_physical_memory_log(), before commit 0f0cb164 accidentally inserted a couple of other functions between the comment and its function. It is in any case obsolete since (a) the function arguments it refers to have been replaced with a single MemoryRegionSection* argument and (b) the inability to handle regions whose offset_within_address_space and offset_within_region aren't equally aligned was fixed as part of the rewrite of this code. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Tyler Hall 提交于
Registering a multi-page memory region that is non-page-aligned results in a subpage from the start to the page boundary, some number of full pages, and possibly another subpage from the last page boundary to the end. The full pages will have a value for offset_within_region that is not a multiple of TARGET_PAGE_SIZE. Accesses through softmmu are unable to handle this and will segfault. Handling full pages through subpages is not optimal, but only non-page-aligned mappings take the penalty. Signed-off-by: NTyler Hall <tylerwhall@gmail.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Tyler Hall 提交于
subpage_register() expects "end" to be the last byte in the mapping. Registering a non-page-aligned memory region that extends up to or beyond a page boundary causes subpage_register() to silently fail through the (end >= PAGE_SIZE) check. This bug does not cause noticeable problems for mappings that do not extend to a page boundary, though they do register an extra byte. Signed-off-by: NTyler Hall <tylerwhall@gmail.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Amos Kong 提交于
Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Benoît Canet 提交于
Signed-off-by: NBenoit Canet <benoit@irqsave.net> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Benoît Canet 提交于
Use the dedicated counting function in qmp_query_block in order to propagate the backing file depth to HMP and add backing_file_depth to qmp-commands.hx Signed-off-by: NBenoit Canet <benoit@irqsave.net> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Benoît Canet 提交于
Create bdrv_get_backing_file_depth() in order to be able to show in QMP and HMP how many ancestors backing an image a block device have. Signed-off-by: NBenoit Canet <benoit@irqsave.net> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Hervé Poussineau 提交于
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This reverts commit 92336855. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Hannes Reinecke 提交于
This patch introduces a new property 'sas_address' which allows the user to specify the SAS address for the HBA. The default address is following the NAA locally assigned identifier format with the locally assigned address 0x525400 as used eg for the MAC addresses. The lower bytes are set to the pci address which will ensure uniqueness for the local machine. The port addresses are now calculated based on the magic number 0x1221 (which is found in real hardware, too) plus the device number. Signed-off-by: NHannes Reinecke <hare@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andreas Faerber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Reported-by: NGerhard Wiesinger <lists@wiesinger.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Weil 提交于
Commit f90c2bcd changed PCIUnregisterFunc, therefore the function prototype needs an update. megasas.o is currently not linked, so this bug was not detected by the buildbots. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Ronnie Sahlberg 提交于
The START STOP UNIT command will only eject/load media if power condition is zero. If power condition is !0 then LOEJ and START will be ignored. From MMC (sbc contains similar wordings too) The Power Conditions field requests the block device to be placed in the power condition defined in Table 558. If this field has a value other than 0h then the Start and LoEj bits shall be ignored. Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Ronnie Sahlberg 提交于
Change the sense codes for failures to eject a device that is locked by PREVENT_ALLOW_MEDIUM_REMOVAL from the generic MEDIA_LOAD_OR_EJECT_FAILED to the more specific MEDIUM_REMOVAL_PREVENTED. The second sense code is more accurate, and is also listed in MMC annex F for the recommended sense codes for MMC devices while the first sense code is not. Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Maydell 提交于
For command line options which permit '?' meaning 'please list the permitted values', add support for 'help' as a synonym, by abstracting the check out into a helper function. This change means that in some cases where we were being lazy in our string parsing, "?junk" will now be rejected as an invalid option rather than being (undocumentedly) treated the same way as "?". Update the documentation to use 'help' rather than '?', since '?' is a shell metacharacter and thus prone to fail confusingly if there is a single character filename in the current working directory and the '?' has not been escaped. It's therefore better to steer users towards 'help', though '?' is retained for backwards compatibility. We do not, however, update the output of the system emulator's -help (or any documentation autogenerated from the qemu-options.hx which is the source of the -help text) because libvirt parses our -help output and will break. At a later date when QEMU provides a better interface so libvirt can avoid having to do this, we can update the -help text too. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Change field type to bool. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
CPU_COMMON_THREAD was only used for Windows, adding an hThread field to CPU_COMMON. Move the field into QOM CPUState and change its type to HANDLE, which it is assigned from. This requires Windows headers, pulled in through qemu-thread.h. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
qemu_cpu_is_self(), passing the return value through, will later be adapted to return bool as well. Signed-off-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NStefan Weil <sw@weilnetz.de>
-
- 02 8月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
Support escaping the escape character, and make more robust (don't die for '', handle ' without matching '. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 01 8月, 2012 3 次提交
-
-
由 Richard W.M. Jones 提交于
glibc 2.16 will remove the undocumented definition of 'struct siginfo' from <bits/siginfo.h>. This change is already present in glibc 2.15.90, so qemu compilation of certain targets (eg. cris-user) breaks. This struct was always typedef'd to be the same as 'siginfo_t' which is what POSIX documents, so use that instead. Signed-off-by: NRichard W.M. Jones <rjones@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Mammedov 提交于
Moving reset callback into cpu object from board level and resetting cpu at the end of x86_cpu_realize() will allow properly create cpu object during run-time (hotplug) without calling reset externaly. When reset over QOM hierarchy is implemented, reset callback should be removed. v2: - leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC init is moved in cpu.c Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Mammedov 提交于
MP initialization protocol differs between cpu families, and for P6 and onward models it is up to CPU to decide if it will be BSP using this protocol, so try to model this. However there is no point in implementing MP initialization protocol in qemu. Thus first CPU is always marked as BSP. This patch: - moves decision to designate BSP from board into cpu, making cpu self-sufficient in this regard. Later it will allow to cleanup hw/pc.c and remove cpu_reset and wrappers from there. - stores flag that CPU is BSP in IA32_APIC_BASE to model behavior described in Inted SDM vol 3a part 1 chapter 8.4.1 - uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP patch is based on Jan Kiszka's proposal: http://thread.gmane.org/gmane.comp.emulators.qemu/100806Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-