In addition this adds missing braces to the function to be consistent
with the coding style.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It doesn't really make sense for functions in qcow2.c to be named
qcow_ so convert the names to match correctly.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds support for the qemu-img check command.  It also
introduces a dirty bit in the qed header to mark modified images as
needing a check.  This bit is cleared when the image file is closed
cleanly.

If an image file is opened and it has the dirty bit set, a consistency
check will run and try to fix corrupted table offsets.  These
corruptions may occur if there is power loss while an allocating write
is performed.  Once the image is fixed it opens as normal again.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch implements the read/write state machine.  Operations are
fully asynchronous and multiple operations may be active at any time.

Allocating writes lock tables to ensure metadata updates do not
interfere with each other.  If two allocating writes need to update the
same L2 table they will run sequentially.  If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables.  The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).

With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch introduces the qed on-disk layout and implements image
creation.  Later patches add read/write and other functionality.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add support to discard blocks in a raw image residing on an XFS filesystem
by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes.  Support for other
hole punching mechanisms can be added when they become available.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

discard [-Cq] off len -- discards a number of bytes at a specified
offset

 discards a range of bytes from the given offset

 Example:
 'discard 512 1k' - discards 1 kilobyte from 512 bytes into the file

 Discards a segment of the currently open file.
 -C, -- report statistics in a machine parsable format
 -q, -- quite mode, do not show I/O statistics
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Support discards via the WRITE SAME command with the unmap bit set, and
tell the initiator about the support for it via the block limit and the
new thin provisioning EVPD pages.  Also fix the comment which incorrectly
describedthe block limits EVPD page.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a new bdrv_discard method to free blocks in a mapping image, and a new
drive property to set the granularity for these discard.  If no discard
granularity support is set discard support is disabled.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We register the vm change state handler in a PCI BAR map() function.
This function can be called multiple times throughout the lifetime of a
PCI IDE device.  This results in duplicate vm change state handlers
being register, none of which are ever unregistered.

Instead, register the vm change state handler in the device's init
function once and for all.

piix tested, cmd646 and via not tested.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's an indirect call to qemu_malloc, which never returns an error.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Kevin suggested to have bdrv_img_create() return proper -errno values
on error.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The monitor command is:
snapshot_blkdev <device> [snapshot-file] [format]

Default format is qcow2. For now snapshots without a snapshot-file, eg
internal snapshots, are not supported.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch re-factors img_create() moving the code doing the actual
work into block.c where it can be shared with QEMU. This is needed to
be able to create images from QEMU to be used for live snapshots.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Call error_set_progname during the qemu-img initialization, so that error
messages printed with error_report() use the right prefix.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

ATAPI also can do ncq, so let's expose the capability.

This patch makes CD-ROM support work on Windows 7 for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Set SATA Mode Select to AHCI in the Address Map Register.
Signed-off-by: NSebastian Herbszt <herbszt@gmx.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch enables AHCI for all machines supporting PCI.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Every device that can do PCI should also be able to do IDE. So let's move
the IDE definitions over to pci.mak.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds an emulation layer for an ICH-9 AHCI controller. For now
this controller does not do IDE legacy emulation. It is a pure AHCI controller.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We need a PCI ID for our new AHCI adapter. I just picked an ICH-9
because that's the one in the Q35 chipset.

This patch adds a PCI ID define for an ICH-9 AHCI adapter.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds the storage sata class id.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I modified ide_identify() to include the zero-based queue length
value in word 75, and set bit 8 in word 76 to signal NCQ support
in the identify data for AHCI SATA drives.
Signed-off-by: NRoland Elek <elek.roland@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We hook into transfer_start and immediately call the end function
for ahci. This means that everything needs to be in place for the
end function when we start the transfer, so let's move the function
down to where all state is in place.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The ATA core is currently heavily intertwined with BMDMA code. Let's loosen
that a bit, so we can happily replace the DMA backend with different
implementations.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that we have the function split out, we have to reindent it.
In order to increase the readability of the actual functional change,
this is split out.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The ATA command interpretation code can be used for PATA and SATA
interfaces alike. So let's split it out into a separate function.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This cleans up the handling of image size in img_create() by parsing
the value early, and then only setting it once if a value has been
added as the last argument to the command line.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This introduces strtosz_suffix() which allows the caller to specify a
default suffix in case the non default of MB is wanted.

strtosz() is kept as a wrapper for strtosz_suffix() which keeps it's
current default of MB.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Backing filenames may contain a protocol.  The code currently doesn't
consider this case and produces filenames that embed "<protocol>:".
Don't combine filenames if the backing filename contains a protocol.

Based on an earlier patch by Anthony Liguori <aliguori@us.ibm.com>.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The bdrv_find_protocol() function returns NULL if an unknown protocol
name is given.  It returns the "file" protocol when the filename
contains no protocol at all.  This makes it difficult to distinguish
between paths which contain a protocol and those which do not.

Factor out a helper function that tests whether or not a filename has a
protocol.  The next patch makes use of this function.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If a user decides to punish a guest by revoking its block device via
drive_del, and subsequently also attempts to remove the pci device
backing it, and the device is using blockdev_auto_del() then we get a
segfault when we attempt to access dinfo->auto_del.[1]

The fix is to check if drive_get_by_blockdev() actually returns a valid
dinfo pointer or not.

1. (qemu) pci_add auto storage file=images/test01.raw,if=virtio,id=block1,snapshot=on
   (qemu) drive_del block1
   (qemu) pci_del 5
   *segfault*
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Tested-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>