Somehow they where left over when converting the hub
to the new usb descriptor infrastructure ...
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Commit 4696425c changes some
endpoints from isocrounous to interrupt by mistake.  Fix it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a paragraph on companion controller mode and a
configuration file which sets it all up for you.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The ICH4 EHCI controller which we emulate has six ports not four.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add ich9 controllers,  Factor out properties to a separate
struct and reference it to reduce duplication.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

To use as a companion controller, use pci-ohci as device and set the
masterbus and num-ports properties, ie:

-device usb-ehci,addr=0b.1,multifunction=on,id=ehci0
-device pci-ohci,addr=0b.0,multifunction=on,masterbus=ehci0.0,num-ports=4
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

To use as a companion controller set the masterbus property.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The PED bit should only be set for highspeed devices and the PEDC bit
should not be set on "normal" PED bit changes, only on io errors.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

with the "usb-ehci: cleanup port reset handling" patch in place no callers
are calling usb_attach(port, NULL) for a port where port->dev is NULL.

Doing that makes no sense as that causes the port detach op to get called
for a port with nothing attached. Add an assert that port->dev != NULL when
dev == NULL, and remove the check for not having a port->dev in the dev == NULL
case.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Doing a usb_attach when dev is NULL will just result in the
port detach op getting called even though nothing was connected in
the first place.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Note this fixes 2 things in one go, first of all the device_destroy bus
op should be a device_detach bus op, as pending async packets from the
device should be cancelled on detach not on destroy.

Secondly having this as a bus op won't work with companion controllers, since
then there will be 1 bus driven by the ehci controller and thus 1 set of bus
ops, but the device being detached may be downstream of a handed over port.
Making the detach of a downstream device a port op allows the ehci controller
to forward this to the companion controller port for handed over ports.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This makes them consistent with the attach and detach ops, and in general
it makes sense to make portops take a port as argument. This also makes
adding support for a companion controller easier / cleaner.

[ kraxel: fix usb-musb.c build ]
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This is a preparation patch for adding support for USB companion controllers.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Cleanup / preparation patch for companion controller support. Note that
as a "side-effect" this patch also fixes the milkymist-softusb controller
not having a port_location set for its ports.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In musb_packet() handle final processing of non-asynchronous
USB packets by directly calling musb_schedule_cb() rather than
going through usb_packet_complete(). The latter will trigger
an assertion because the packet doesn't belong to a device.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Until now, pxa2xx_lcd only supported 90deg rotation, but
some machines (for example Zipit Z2) needs 270deg rotation.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Parameter 'info' is const, so add the missing attribute.

v2:
Add 'const' to the local variable info in do_cpu_reset() and to
the boot_info field in CPUARMState (suggested by Peter Maydell).

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

This bug showed up after 1455084e, and
may be seen only on operating systems *not* using DMA to give commands
to SCSI adapter.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG temps.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

udivx and sdvix don't modify condition flags, so they shall not
overwrite cpu_cc_*
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'ppc-next' of git://repo.or.cz/qemu/agraf:
  PPC: move TLBs to their own arrays
  PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
  PPC: E500: Use MAS registers instead of internal TLB representation
  PPC: Only set lower 32bits with mtmsr
  PPC: update openbios firmware
  PPC: mpc8544ds: Add hypervisor node
  PPC: calculate kernel,initrd,cmdline locations dynamically
  target-ppc: Handle memory-forced I/O controller access
  PPC: E500: Implement reboot controller

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG temps.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use TCG_REG_CALL_STACK instead of TCG_REG_SP for consistency.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

It's a valid branch pc + 2.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The only user (within tcg.c) was removed
Signed-off-by: Nmalc <av1474@comtv.ru>

The only user (within tcg.c) was removed
Signed-off-by: Nmalc <av1474@comtv.ru>