Add tracepoints to track canceled requests.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add tracepoint to track completion of emulated control requests.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When passing through a usb pendrive seabios will present it in the F12
boot menu and will happily boot from it.

This patch adds bootorder support so you can even make it the default
boot device.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

We really don't want to wait for packets finish before submitting the
next, we want keep the data flow running.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

We already have USB_RET_NAK, but that means that a device does not want
to send/receive right now. But with host / network redirection we can
actually have a transaction fail due to some io error, rather then ie
the device just not having any data atm.

This patch adds a new error code named USB_RET_IOERROR for this, and uses
it were appropriate.

Notes:
-Currently all usb-controllers handle this the same as NODEV, but that
 may change in the future, OHCI could indicate a CRC error instead for example.
-This patch does not touch hw/usb-musb.c, that is because the code in there
 handles STALL and NAK specially and has a if status < 0 generic catch all
 for all other errors
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When creating an USB device the old way, there is no way to specify the
target bus. Thus the warning issued by usb_create makes no sense and
rather confuses our users.

Resolve this by passing a bus reference to the usbdevice_init handler
and letting those handlers forward it to usb_create.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet.  So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket.  Also the devaddr and
devep fields are not needed any more.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

All drivers except usb-hub use usb_generic_handle_packet.  The only
reason the usb hub has its own function is that it used to be called
with packets which are intended for downstream devices.  With the new,
separate device lookup step this doesn't happen any more, so the need
for a different handle_packet callback is gone.

So we can kill the handle_packet callback and just call
usb_generic_handle_packet directly.  The special hub handling in
usb_handle_packet() can go away for the same reason.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This was done in a mostly automated fashion.  I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.

The first step was a sed-based addition of the parent type to the subclass
registration functions.

The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.

Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.

We are almost fully converted to QOM after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Type registeration is going to get turned into a QOM call so decouple the
legacy support.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add function to dump endpoint data, for debugging purposes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Start maintaining endpoint state at USBDevice level.  Add USBEndpoint
struct and some helper functions to deal with it.  For now it contains
the endpoint type only.  Moved over some bits from usb-linux.c
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Also handle {GET,SET}_INTERFACE in common code (usb-desc.c).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move fields from USBHostDevice to USBDevice.
Add bits to usb-desc.c to fill them for emulated devices too.
Also allow to set configuration 0 (== None) for emulated devices.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch removes support for parsing /proc/bus/usb/devices for device
discovery.  The code lacks a few features compared to the sysfs code and
is also bitrotting as everybody has sysfs these days.

This implies having sysfs mounted is mandatory now to use the usb-host
driver.  udev isn't required though.  qemu will prefer the udev-managed
device nodes below /dev/bus/usb, but in case this directory isn't preset
qemu will use the device nodes below /proc/bus/usb (default usbfs mount
point).

Bottom line: make sure you have both sysfs and usbfs mounted properly,
and everything should continue to work as it did before.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Factor out port release into a separate function.  Call release function
in exit notifier too.  Add explicit call the USBDEVFS_RELEASE_PORT
ioctl, just closing the hub file handle seems not to be enougth.  Make
sure we release the port before resetting the device, otherwise host
drivers will not re-attach.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Changed From V1:
Use DPRINTF instead of fprintf,because it is not an error.

When testing ipod on QEMU by He Jie Xu<xuhj@linux.vnet.ibm.com>,qemu made a assertion.
We found that the ipod with 2 configurations,and the usb-linux did not parse the descriptor correctly.
The descr_len returned is the total length of the all configurations,not one configuration.
The older version will through the other configurations instead of skip,continue parsing the descriptor of interfaces/endpoints in other configurations,then went wrong.

This patch will put the configuration descriptor parse in loop outside and dispel the other configurations not requested.
Signed-off-by: NCao,Bing Bu <mars@linux.vnet.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a special function to reset the host usb device.  It tracks the time
needed by the USBDEVFS_RESET ioctl and prints a warning in case it needs
too long.  Usually it should be finished in 200 - 300 miliseconds.
Warning threshold is one second.

Intention is to help troubleshooting by indicating that the usb device
stopped responding even to a reset request and is possibly broken.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Commit 0c402e5a is incomplete
and misses one of the two function pointer calls in
usb_host_scan_dev().  Add the additional port handling logic
to the other call too.

Spotted by Coverity.

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The whole usb_host_close() function is skipped in case the device is not
in attached state.  This is wrong though, only then usb_device_detach()
must be skipped, all other cleanup (especially device reset and closing
the file handle) still needs to be done.  There are code paths where
usb_host_close() is called with the device in detached state already.

This fixes usb-host devices not being released and returned to the host
after removing them with device_del.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In case the host uses the usb device usbfs will refuse to set the
configuration due to the device being busy.  Handle this case by
disconnection the interfaces, then trying again.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move code to claim usb ports and to disconnect usb interfaces into
usb_host_claim_port and usb_host_disconnect_ifaces functions.  No
functional change.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Unfortunaly this is limited to root ports.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

USB Devices can have up to 15 IN and 15 OUT endpoints, not 15 endpoints
total.  Move from one array to two arrays (one IN, one OUT) to maintain
the endpoint state.

When configured to pass through a specific host port (using hostbus and
hostport properties), try to claim the port if supported by the kernel.
That will avoid any kernel drivers binding to devices plugged into that
port.  It will not stop any userspace apps (such as usb_modeswitch)
access the device via usbfs though.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It is perfectly fine to leave the usb device in unconfigured state
(USBHostDevice->configuration == 0).  Just do that and wait for the
guest to explicitly set a configuration.  This is closer to what real
hardware does and it also simplifies the device initialization.  There
is no need to figure how the device is configured on the host.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Limit the number of times qemu tries to open host devices to three.
Reset error counter when the device goes away, after un-plugging and
re-plugging the device qemu will try again three times.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Two fixes for the price of one ;)

First, reinitialize the endpoint table after device reset.
This is needed anyway as the reset might have switched interfaces.
It also clears the endpoint halted state.

Second the CLEAR_HALT ioctl wants a unsigned int passed in as
argument, not uint8_t.

This gets my usb sd card reader (sandisk micromate) going.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Don't report errors on devices which are in disconnected
and closing state.

Add a bunch of trace points to usb-linux.c  Drop a bunch of DPRINTK's in
favor of the trace points.  Also cleanup error reporting a bit while being
at it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add full support for iovecs to usb-host.  The code can split large
transfers into smaller ones already, we are using this to also split
requests at iovec borders.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>