IMO useful than showing VGA for any graphic device
even in case it is something completely different.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Each display gets its own tab.  Tab switching continues to work like it
did, just the hotkeys of the vte consoles changes in case a secondary
display is present as it will get ctrl-alt-2 assigned and the vtes are
shifted by one.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move all vte-related items into VirtualVteConsole substruct.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Lookup page numbers using gtk_notebook_page_num() instead.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Only show the scrollbar if the content doesn't fit on the visible space.

[ kraxel: fix box packing ]
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The vte tabs simply get the size of the vga tab then, with whatever
cols and lines are fitting in.  I find this bahavior more useful than
resizing the qemu window all day long.

YMMV.  Comments are welcome.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The vte widget implements the scrollable interface, placing it into
a scrolled window is pointless and creates a bunch of strange effects.
Zap it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* remotes/qmp-unstable/queue/qmp:
  qapi: zero-initialize all QMP command parameters
  scripts/qapi.py: Avoid syntax not supported by Python 2.4
  doc: add "setup" to list of migration states
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

purge error_is_set()

# gpg: Signature made Wed 21 May 2014 11:43:44 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-chardev-2:
  error: error_is_set() is finally unused; remove
  char: Explain qmp_chardev_add()'s unusual error handling
  char: Clean up fragile use of error_is_set()
  char: Use return values instead of error_is_set(errp)
  qemu-socket: Clean up inet_connect_opts()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

audio: two intel-hda fixes.

# gpg: Signature made Wed 21 May 2014 09:49:39 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-5:
  hw/audio/intel-hda: Avoid shift into sign bit
  audio/intel-hda: support FIFORDY
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

some s390 patches:

- Enable irqfds on s390 via the new adapter interrupt routing type.
  As a prereq, fix the kvm enable_cap helpers for some compilers and
  split the s390 flic into kvm and non-kvm parts.
- Enable software and hardware debugging support on s390. This needs a
  kernel headers update.

# gpg: Signature made Tue 20 May 2014 12:30:54 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/s390x-20140520:
  s390x/kvm: hw debugging support via guest PER facility
  s390x/kvm: software breakpoint support
  s390x: remove duplicate definitions of DIAG 501
  linux-headers: update
  s390x/virtio-ccw: wire up irq routing and irqfds
  s390x/virtio-ccw: reference-counted indicators
  s390x: add I/O adapter registration
  s390x: split flic into kvm and non-kvm parts
  kvm: Fix enable_cap helpers on older gcc
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/bonzini/scsi-next:
  megasas: remove buildtime strings
  block: iscsi build fix if LIBISCSI_FEATURE_IOVECTOR is not defined
  virtio-scsi: Plug memory leak on virtio_scsi_push_event() error path
  scsi: Document intentional fall through in scsi_req_length()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In general QMP command parameter values are specified by consumers of the
QMP/HMP interface, but in the case of optional parameters these values may
be left uninitialized.

It is considered a bug for code to make use of optional parameters that have
not been flagged as being present by the marshalling code (via corresponding
has_<parameter> parameter), however our marshalling code will still pass
these uninitialized values on to the corresponding QMP function (to then
be ignored). Some compilers (clang in particular) consider this unsafe
however, and generate warnings as a result. As reported by Peter Maydell:

  This is something clang's -fsanitize=undefined spotted. The
  code generated by qapi-commands.py in qmp-marshal.c for
  qmp_marshal_* functions where there are some optional
  arguments looks like this:

      bool has_force = false;
      bool force;

      mi = qmp_input_visitor_new_strict(QOBJECT(args));
      v = qmp_input_get_visitor(mi);
      visit_type_str(v, &device, "device", errp);
      visit_start_optional(v, &has_force, "force", errp);
      if (has_force) {
          visit_type_bool(v, &force, "force", errp);
      }
      visit_end_optional(v, errp);
      qmp_input_visitor_cleanup(mi);

      if (error_is_set(errp)) {
          goto out;
      }
      qmp_eject(device, has_force, force, errp);

  In the case where has_force is false, we never initialize
  force, but then we use it by passing it to qmp_eject.
  I imagine we don't then actually use the value, but clang
  complains in particular for 'bool' variables because the value
  that ends up being loaded from memory for 'force' is not either
  0 or 1 (being uninitialized stack contents).

Fix this by initializing all QMP command parameters to {0} in the
marshalling code prior to passing them on to the QMP functions.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The Python "except Foo as x" syntax was only introduced in
Python 2.6, but we aim to support Python 2.4 and later.
Use the old-style "except Foo, x" syntax instead, thus
fixing configure/compile on systems with older Python.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Character backend open hasn't been fully converted to the Error API.
Some opens fail without setting an error.  qmp_chardev_add() needs to
detect when that happens, and set a generic error.  Explain that in a
comment, and inline error_is_set() for clarity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque.  It's wrong when ERRP
may be null, because errors go undetected when it is.  It's fragile
when proving ERRP non-null involves a non-local argument.  Else, it's
unnecessarily opaque (see commit 84d18f06).

The error_is_set(errp) in qemu_chr_new_from_opts() is merely fragile,
because the callers never pass a null errp argument.

Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null.  Check perfectly suitable return
values instead when possible.  As far as I can tell, errp can't be
null there, but this is more robust and more obviously correct
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Separate the search for a working addrinfo from the code that does
something with it.  Makes for a clearer search loop.

Use a local Error * to simplify resetting the error in the search
loop.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

On a slow VM (e.g., nested), you see the "setup" state when you query the
migration status.
Signed-off-by: NPeter Feiner <peter@gridcentric.ca>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Using __DATE__ or __TIME__ in binary pkgs changes the checksum of
compiled binaries if they get rebuilt, even if there are no other
source changes.  Replace the dynamic strings with some equally
informative static strings.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch makes use of the hw debugging support in kvm (provided by the guest's
PER facility) on s390. It enables the following features, available using the
gdbserver:
- single-stepping
- hw breakpoints
- hw watchpoints
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch allows to insert and remove sw breakpoints using the QEMU gdbserver
on s390 as well as to interrupt execution on a breakpoint hit when running
with KVM enabled.

Whenever a software breakpoint is inserted, common code calls kvm ioctl
KVM_UPDATE_GUEST_DEBUG. As this method's default on s390 is to return an error
if not implement, the insertion will fail. Therefore, KVM also has to be
updated in order to make use of software breakpoints.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

When restoring the previously saved instruction in
kvm_arch_remove_sw_breakpoint(), we only restored one byte. Let's use
the sizeof() operator to make sure we restore the entire instruction.

While we are at it, let's remove the duplicate definitions of DIAG 501
and replace its size (used when reading/writing the instruction) with
a sizeof() operator to make the code self explaining and less error-prone.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Sync linux-headers with kvm/next (87c00572ba05aa8c9db118da75c608f47eb10b9e)
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Make use of the new s390 adapter irq routing support to enable real
in-kernel irqfds for virtio-ccw with adapter interrupts.

Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but
rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward
compatibility.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Make code using the same indicators point to a single allocated structure
that is freed when the last user goes away.

This will be used by the irqfd code to unmap addresses after the last user
is gone.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Register an I/O adapter interrupt source for when virtio-ccw devices start
using adapter interrupts.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Introduce a common parent class for both cases, where kvm and non-kvm
can hook up callbacks. This will be used by follow-on patches for
adapter registration and mapping.

We now always have a flic, regardless of whether we use kvm; the
non-kvm implementation just doesn't do anything.
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Commit 40f1ee27 introduced handy helpers for enable_cap calls on
vcpu and vm level. Unfortunately some older gcc versions (4.7.1, 4.6)
seem to choke on signedness detection in inline created variables:

target-ppc/kvm.c: In function 'kvmppc_booke_watchdog_enable':
target-ppc/kvm.c:1302:21: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
target-ppc/kvm.c: In function 'kvmppc_set_papr':
target-ppc/kvm.c:1504:21: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]

However - thanks to Thomas Huth for the suggestion - we can just cast the
offending potentially 0 value to a signed type, making the comparison signed.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Block patches

# gpg: Signature made Mon 19 May 2014 15:21:14 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (22 commits)
  block: optimize zero writes with bdrv_write_zeroes
  blockdev: add a function to parse enum ids from strings
  util: add qemu_iovec_is_zero
  qcow1: Stricter backing file length check
  qcow1: Validate image size (CVE-2014-0223)
  qcow1: Validate L2 table size (CVE-2014-0222)
  qcow1: Check maximum cluster size
  qcow1: Make padding in the header explicit
  curl: Add usage documentation
  curl: Add sslverify option
  curl: Remove broken parsing of options from url
  curl: Fix build when curl_multi_socket_action isn't available
  qemu-iotests: Fix blkdebug in VM drive in 030
  qemu-iotests: Fix core dump suppression in test 039
  iotests: Add test for the JSON protocol
  block: Allow JSON filenames
  check-qdict: Add test for qdict_join()
  qdict: Add qdict_join()
  block: add test for vhdx image created by Disk2VHD
  block: vhdx - account for identical header sections
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit b03c3805 introduced the function
iscsi_allocationmap_is_allocated(), however it is only used within a
code block that is conditionally compiled.  This produces a warning
(error with -werror) of "defined but not used" for the the function, if
LIBISCSI_FEATURE_IOVECTOR is not defined.

This wraps iscsi_allocationmap_is_allocated() in the same conditional.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a U suffix to avoid shifting into the sign bit (which is
undefined behaviour in C).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

linux kernel 3.12 has changed intel-hda
driver to always check for FIFORDY, this
causes long hangs in guest since QEMU
always has this bit set to 0. We now simply set
it to 1 always, since we're synchronous anyway
and always ready to receive the stream
Signed-off-by: NStanislav Vorobiov <s.vorobiov@samsung.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* remotes/qmp-unstable/queue/qmp:
  qapi: skip redundant includes
  monitor: Add netdev_del id argument completion.
  monitor: Add netdev_add type argument completion.
  monitor: Add set_link arguments completion.
  monitor: Add chardev-add backend argument completion.
  monitor: Add chardev-remove command completion.
  monitor: Convert sendkey to use command_completion.
  qapi: Show qapi-commands.py invocation in qapi-code-gen.txt
  qapi: Replace uncommon use of the error API by the common one
  tests: Don't call visit_end_struct() after visit_start_struct() fails
  hw: Don't call visit_end_struct() after visit_start_struct() fails
  hmp: Call visit_end_struct() after visit_start_struct() succeeds
  qapi: Un-inline visit of implicit struct
  qapi-visit.py: Clean up a sloppy use of field prefix
  qapi: Clean up shadowing of parameters and locals in inner scopes
  qapi-visit.py: Clean up confusing push_indent() / pop_indent() use
  qapi: Replace start_optional()/end_optional() by optional()
  qapi: Remove unused Visitor callbacks start_handle(), end_handle()
  qapi: Normalize marshalling's visitor initialization and cleanup
  qapi: Update qapi-code-gen.txt example to match current code
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Input code update:
 - add keycode mapping helpers to core.
 - start switching devices to new input api.
 - misc bugfixes.

# gpg: Signature made Fri 16 May 2014 07:43:45 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-8:
  input: sparc32 kbd: claim en-us layout
  input: sparc32 kbd: fix some key mappings
  input: remove sparc keymap hack
  input: switch sparc32 kbd to new input api
  input: switch ps/2 mouse to new input api
  input: switch ps/2 kbd to new input api
  input: use KeyValue directly in sendkey monitor command
  input: add qemu_input_handler_deactivate
  input: key mapping helpers
  ps2: set ps/2 output buffer size as the same as kernel
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.

This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.

I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.

a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX

QCOW2         [off]     [on]     [unmap]
-----
runtime:       14secs    1.1secs  1.1secs
filesize:      937M      18M      18M

iSCSI         [off]     [on]     [unmap]
----
runtime:       9.3s      0.9s     0.9s

b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct

QCOW2         [off]     [on]     [unmap]
-----
runtime:       246secs   18secs   18secs
filesize:      51G       192K     192K
throughput:    203M/s    2.3G/s   2.3G/s

iSCSI*        [off]     [on]     [unmap]
----
runtime:       8mins     45secs   33secs
throughput:    106M/s    1.2G/s   1.6G/s
allocated:     100%      100%     0%

* The storage was connected via an 1Gbit interface.
  It seems to internally handle writing zeroes
  via WRITESAME16 very fast.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

* remotes/bonzini/scsi-next:
  [PATCH] block/iscsi: bump year in copyright notice
  block/iscsi: allow cluster_size of 4K and greater
  block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES
  block/iscsi: speed up read for unallocated sectors
  block/iscsi: allow fall back to WRITE SAME without UNMAP
  MAINTAINERS: mark megasas as maintained
  megasas: Add MSI support
  megasas: Enable MSI-X support
  megasas: Implement LD_LIST_QUERY
  scsi: Improve error messages more
  scsi-disk: Improve error messager if can't get version number
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>