- 23 8月, 2013 1 次提交
-
-
由 Alex Bligh 提交于
include/qemu/timer.h has no need to include main-loop.h and doing so causes an issue for the next patch. Unfortunately various files assume including timers.h will pull in main-loop.h. Untangle this mess. Signed-off-by: NAlex Bligh <alex@alex.org.uk> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 16 7月, 2013 1 次提交
-
-
由 Amos Kong 提交于
Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 03 5月, 2013 1 次提交
-
-
由 Amos Kong 提交于
assign_name() creates a name MODEL.NUM, where MODEL is the client's model, and NUM is the number of MODELs that already exist. Markus added NIC naming for non-VLAN clients in commit 53e51d85. commit d33d93b2 incorrectly added a judgement of net-hub. It caused net clients created with -netdev get same names. eg: # qemu-upstream -device virtio-net-pci,netdev=h1 -netdev tap,id=h1 \ -device virtio-net-pci,netdev=h2 -netdev tap,id=h2 .. (qemu) info network virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56 \ h1: index=0,type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:57 \ h2: index=0,type=tap,ifname=tap1,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown This patch removed the check of nic-hub, and created unique names for all net clients that have same model. v2: update commitlog & comments Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 25 3月, 2013 1 次提交
-
-
由 Scott Feldman 提交于
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty of room for the ethernet and virtio_net headers. Originally, ran into this limitation when using -netdev UDP sockets to connect VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net NIC model). Test is simple: ping -M do -s 8500 <target>. This test will attempt to ping with unfragmented packet of given size. Without patch, size is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt size up to 9000 (again, minus protocol hdrs). v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply to vde and socket netdevs. v1: increase buf size to 12K just for -netdev UDP sockets Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 27 2月, 2013 2 次提交
-
-
由 Jason Wang 提交于
Edivaldo reports a problem that the array of NetClientState in NICState is too large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not used. Instead of static arrays, solving this issue by allocating the queues on demand for both the NetClientState array in NICState and VirtIONetQueue array in VirtIONet. Tested by myself, with single virtio-net-pci device. The memory allocation is almost the same as when multiqueue is not merged. Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Cc: qemu-stable@nongnu.org Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Luigi Rizzo 提交于
When frontend and backend are connected through a hub as below (showing only one direction), and the frontend (or in general, all output ports of the hub) cannot accept more traffic, the backend queues packets in queue-A. When the frontend (or in general, one output port) becomes ready again, quemu tries to flush packets from queue-B, which is unfortunately empty. e1000.0 <--[queue B]-- hub0port0(hub)hub0port1 <--[queue A]-- tap.0 To fix this i propose to introduce a new function net_hub_flush() which is called when trying to flush a queue connected to a hub. Signed-off-by: NLuigi Rizzo <rizzo@iet.unipi.it> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 14 2月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
The pSeries machine and some other devices don't supply a cleanup callback. Revert part of 1ceef9f2 that started calling it unconditionally. Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de> Message-id: 1360707366-9271-1-git-send-email-afaerber@suse.de Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 08 2月, 2013 1 次提交
-
-
由 Michael Roth 提交于
1ceef9f2 added handling for cleaning up multiple queues in qemu_del_nic() for cases where multiqueue is in use. To determine the number of queues it looks at nic->conf->queues, then iterates through all the queues to cleanup the associated NetClientStates. If no queues are found, no NetClientStates are deleted. However, nic->conf->queues is only set when a peer is created via -netdev or netdev_add, and is otherwise 0. This causes us to spin in net_cleanup() if we attempt to shut down qemu before adding a host device. Since qemu_new_nic() unconditionally creates at least 1 queue/NetClientState at queue idx 0, make qemu_del_nic() always attempt to clean it up. Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 2月, 2013 7 次提交
-
-
由 Jason Wang 提交于
This patch adds basic multiqueue support for qemu. The idea is simple, an array of NetClientStates were introduced in NICState, parse_netdev() were extended to find and match all NetClientStates belongs to the backend and place their pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates that belongs to a nic and NICStates belongs to the netdev. And a queue_index were introduced in NetClientState to track its index. After this, each peers of a NICState were abstracted as a queue. After this change, all NetClientState that belongs to the same backend/nic has the same id. When use want to change the link status, all NetClientStates that belongs to the same backend/nic will be also changed. When user want to delete a device or netdev, all NetClientStates that belongs to the same backend/nic will be deleted also. Changing or deleting an specific queue is not allowed. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
To allow allocating an array of NetClientState and free it once, this patch introduces destructor of NetClientState. Which could do type specific free, which could be used by multiqueue to free the array once. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
This patch separates the setup of NetClientState from its allocation, this will allow allocating an arrays of NetClientState and does the initialization one by one which is what multiqueue needs. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
In multiqueue, all NetClientState that belongs to the same netdev or nic has the same id. So this patches introduces an helper qemu_find_net_clients_except() which finds all NetClientState with the same id. This will be used by multiqueue networking. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
To support multiqueue nic, this patch separate the nic destructor from qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween NiCState and NetClientState were not 1:1 in multiqueue. The following patches would refactor this function to support multiqueue nic. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
To support multiqueue, this patch introduces a helper qemu_get_nic() to get NICState from a NetClientState. The following patches would refactor this helper to support multiqueue. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
To support multiqueue, the patch introduce a helper qemu_get_queue() which is used to get the NetClientState of a device. The following patches would refactor this helper to support multiqueue. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 1月, 2013 1 次提交
-
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 17 1月, 2013 1 次提交
-
-
由 Wenchao Xia 提交于
This patch change all info call back function to take additional QDict * parameter, which allow those command take parameter. Now it is set to NULL at default case. Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 13 1月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 19 12月, 2012 6 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Various header files rely on qemu-char.h including qemu-config.h or main-loop.h, but they really do not need qemu-char.h at all (particularly interesting is the case of the block layer!). Clean this up, and also add missing inclusions of qemu-char.h itself. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 01 11月, 2012 1 次提交
-
-
由 Stefan Hajnoczi 提交于
The netdev_del command crashes when given a -net device, because it calls qemu_opts_del(NULL). Check that this is a -netdev before attempting to delete it and the QemuOpts. Note the subtle change from qemu_find_opts_err("netdev", errp) to qemu_find_opts_err("netdev", NULL). Since "netdev" is a built in options group and we don't check for NULL return anyway, there's no use in passing errp here. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 08 10月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
This patch doesn't seem much useful alone, I must admit. However, it makes sense as part of the upcoming directory reorganization, where I want to have include/net/tap.h as the net<->hw interface for tap. Then having both net/tap.h and include/net/tap.h does not work. "Fixed" by moving all the init functions to a single header file net/clients.h. The patch also adopts a uniform style for including net/*.h files from net/*.c, without the net/ path. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
-
- 14 9月, 2012 2 次提交
-
-
由 Stefan Hajnoczi 提交于
This patch adds the missing NetClient->receive_disabled logic in the sendv delivery code path. It seems that commit 893379ef ("net: disable receiving if client returns zero") only added the logic to qemu_deliver_packet() and not qemu_deliver_packet_iov(). The receive_disabled flag should be automatically set when .receive(), .receive_raw(), or .receive_iov() return 0. No further packets will be delivered to the NetClient until the receive_disabled flag is cleared again by calling qemu_flush_queued_packets(). Typically the NetClient will wait until its file descriptor becomes writable and then invoke qemu_flush_queued_packets() to resume transmission. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Paolo Bonzini 提交于
virtio-net has code to flush the queue and notify the iothread whenever new receive buffers are added by the guest. That is fine, and indeed we need to do the same in all other drivers. However, notifying the iothread should be work for the network subsystem. And since we are at it we can add a little smartness: if some of the queued packets already could not be delivered, there is no need to notify the iothread. Reported-by: NLuigi Rizzo <rizzo@iet.unipi.it> Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Jan Kiszka <jan.kiszka@siemens.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NAmos Kong <akong@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 07 9月, 2012 1 次提交
-
-
由 Nicholas Bellinger 提交于
This patch renames+moves the net_handle_fd_param() caller used to obtain a file descriptor from either qemu_parse_fd() (the normal case) or from monitor_get_fd() (migration case) into a generically prefixed monitor_handle_fd_param() to be used by vhost-scsi code. Also update net/[socket,tap].c consumers to use the new prefix. Reported-by: NMichael S. Tsirkin <mst@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 03 8月, 2012 1 次提交
-
-
由 Peter Maydell 提交于
For command line options which permit '?' meaning 'please list the permitted values', add support for 'help' as a synonym, by abstracting the check out into a helper function. This change means that in some cases where we were being lazy in our string parsing, "?junk" will now be rejected as an invalid option rather than being (undocumentedly) treated the same way as "?". Update the documentation to use 'help' rather than '?', since '?' is a shell metacharacter and thus prone to fail confusingly if there is a single character filename in the current working directory and the '?' has not been escaped. It's therefore better to steer users towards 'help', though '?' is retained for backwards compatibility. We do not, however, update the output of the system emulator's -help (or any documentation autogenerated from the qemu-options.hx which is the source of the -help text) because libvirt parses our -help output and will break. At a later date when QEMU provides a better interface so libvirt can avoid having to do this, we can update the -help text too. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 01 8月, 2012 10 次提交
-
-
由 Zhi Yong Wu 提交于
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Zhi Yong Wu 提交于
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Another step in moving the vlan feature out of net core. Users only deal with NetClientState and therefore qemu_del_vlan_client() should be named qemu_del_net_client(). Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Now that VLANClientState has been renamed to NetClientState all 'vc' local variables should be 'nc'. Much of the code already used 'nc' but there are places where 'vc' needs to be renamed. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
The vlan feature is no longer part of net core. Rename VLANClientState to NetClientState because net clients are not explicitly associated with a vlan at all, instead they have a peer net client to which they are connected. This patch is a mechanical search-and-replace except for a few whitespace fixups where changing VLANClientState to NetClientState misaligned whitespace. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
There is no longer a distinction between vlan clients and non-vlan clients in the net core. The net core only knows about point-to-point clients which are connected to a peer. It's time to rename the global list of net clients since it no longer refers to vlans at all. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
VLANState is no longer used and can be removed. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
The vlan implementation in net.c has been replaced by hubs so we can remove the code. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Since hubs are now used to implement the 'vlan' feature and the vlan argument is always NULL, remove the argument entirely and update all net clients that use qemu_new_net_client(). Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Checks can be performed to make sure that hubs have at least one NIC and one host device, warning the user if this is not the case. Configurations which do not meet this rule tend to be broken but just emit a warning. This patch preserves compatibility with the checks performed by net core on vlans. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-