A small improvement in the SCSI request API.  Pass the status
at the time the request is completed, so that we can assert that
no request is completed twice.  This would have detected the
problem fixed in the previous patch.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

vscsi supports autosensing by providing sense data directly in the
response.  When get_sense was added, the older state machine approach
that sent REQUEST SENSE commands separately was left in place.  Remove
it, all existing SCSIDevices do support autosensing and the next patches
will make the support come for free from the SCSIBus.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In fact, if the HBA's transfer_data callback goes on with scsi_req_continue
the request will be completed successfully instead of showing a failure.
It can even cause a segmentation fault.

An easy way to trigger it is "eject -f cd" during installation (during media
test if the installer does something like that).
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We've always listened on port 501 for vgabios panic messages.  In the entire
time I've worked on QEMU, I've never actually seen a vgabios panic message :-)

If we change the semantics of this port a little bit, it makes it possible to
use it for more interesting use-cases.  I chose this approach instead of adding
a new I/O port because it avoids having a guest visible change.

This change allows single-byte access to port 501 and also uses the value
written to construct an exit code.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted while reviewing the migration thread patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

If an attempt to create a qdev device on the default sysbus (by passing
NULL as the bus to qdev_create) fails, print a useful error message
rather than crashing trying to dereference a NULL pointer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 8e301472e324b6d6496d8b4ffc66863e99d7a505

user visible changes in seabios:
  * ahci is enabled by default (and thus in this build).
  * bootorder support for ahci.
  * two-pass pci allocator (orders bars by size for better packing).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Break is only noticable with newer spice-server library (0.8.2 release
or 0.9.0 and newer on master branch).

ioport_write's val was changed from uint32_t to uint64_t, this
broke two printfs. Use PRId64 instead of %d.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

same as 8927cfbb, but for qxl_check_state, that was
triggered by qxl_pre_load (which calls qxl_hard_reset, which calls qxl_soft_reset),
and caused the migration target to crash.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

No users left, all migrated over to hw/hid.[ch].
Yea!  Zap it!
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove the dummy USB device and use the HID code directly. Use the HID code
for the mouse support, too.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Use new hid vmstate macro. Version stays the same, because there is no
reordering of the fields.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add VMSTATE macros to describe a HIDState. Based on usb-hid.c descriptions.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Register the keyboard event handler in hid's init() instead of its reset()
function.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

HID reorganziation broke the usb tablet in windows xp.  The reason is
that xp activates idle before it starts polling, which creates a
chicken-and-egg issue:  We don't call hid_pointer_poll because there are
no pending events.  We don't get any events because the activation code
in hid_pointer_poll is never executed and thus all pointer events are
routed to the PS/2 mouse by qemu.

Fix this by creating a hid_pointer_activate function and call it from
usb-hid when the guest sets the idle state.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The Bare ETRAX FS board was a fictive machine that I used when
developing the CRIS system emulation. Since we support the
real AXIS-dev88 developer boards, there is no reason to
keep the fictive one around.

This commit also removes the double registration of the axis-dev88
board.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The conversion passed the wrong opaque pointer, causing a crash on first use.
Pass the correct opaque.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

I guess TRENAME 9p operation needs an update. The 9p op should
more similar renameat. Otherwise anything other than path cannot track
the fid.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

This include llistxattr and lgetxattr.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>