- 16 7月, 2015 1 次提交
-
-
由 Frediano Ziglio 提交于
This patch allow to limit number of heads using qxl driver. By default qxl driver is not limited on any kind on head use so can decide to use as much heads. libvirt has this as a video card parameter (actually set to 1 but not used). This parameter will allow to limit setting a use can do (which could be confusing). Signed-off-by: NFrediano Ziglio <fziglio@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 19 5月, 2015 1 次提交
-
-
由 Gonglei 提交于
Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 06 5月, 2014 1 次提交
-
-
由 Kirill Batuzov 提交于
PortioList is an abstraction used for construction of MemoryRegionPortioList from MemoryRegionPortio. It can be used later to unmap created memory regions. It also requires proper cleanup because some of the memory inside is allocated dynamically. By moving PortioList ot device state we make it possible to cleanup later and avoid leaking memory. This change spans several target platforms. The following testcases cover all changed lines: qemu-system-ppc -M prep qemu-system-i386 -vga qxl qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0 Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 04 11月, 2013 1 次提交
-
-
由 Gerd Hoffmann 提交于
qxl creates a pipe, then writes something to it to wake up the iothread from the spice server thread to raise an irq. These days qemu bottom halves can be scheduled from threads and signals, so there is no reason to do this any more. Time to clean it up. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 18 9月, 2013 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 09 4月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 01 3月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 19 12月, 2012 3 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 12月, 2012 1 次提交
-
-
由 Michael S. Tsirkin 提交于
update all users so we can remove the makefile hack. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 08 10月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
Set qxl pci revision to 4 (for pc-1.3+) so guests know spice-server 0.12 features are available. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 05 9月, 2012 2 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Revision bumped to 4 for new IO support, enabled for spice-server >= 0.11.1. New io enabled if revision is 4. Revision can be set to 4. [ kraxel: 3 continues to be the default revision. Once we have a new stable spice-server release and the qemu patches to enable the new bits merged we'll go flip the switch and make rev4 the default ] This io calls the corresponding new spice api spice_qxl_monitors_config_async to let spice-server read a new guest set monitors config and notify the client. On migration reissue spice_qxl_monitors_config_async. RHBZ: 770842 Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> fixup Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 22 6月, 2012 3 次提交
-
-
由 Alon Levy 提交于
In preperation for supporting a larger framebuffer for multiple monitors on a single card, add a property to qxl vgamem_size_mb, and corresponding byte sized vgamem_size, and use instead of VGA_RAM_SIZE. [ kraxel: simplify property handling, add sanity checks ] [ kraxel: fix mode copying ] Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
soft_reset is called from any of: * QXL_IO_RESET * vga io * pci reset handler Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 03 5月, 2012 1 次提交
-
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 20 4月, 2012 1 次提交
-
-
由 Stefan Weil 提交于
val is an uint64_t, therefore %d was not correct. Signed-off-by: NStefan Weil <sw@weilnetz.de> Acked-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 29 2月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
This patch adds an 64bit pci bar for vram. It is turned off by default. It can be enabled by setting the size of the 64bit bar to be larger than the 32bit bar. Both 32bit and 64bit bar refer to the same memory. Only the first part of the memory is available via 32bit bar. The intention is to allow large vram sizes for 64bit guests, by allowing the vram bar being mapped above 4G, so we don't have to squeeze it into the pci I/O window below 4G. With vram_size_mb=16 and vram64_size_mb=256 it looks like this: 00:02.0 VGA compatible controller: Red Hat, Inc. Device 0100 (rev 02) (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device 1100 Physical Slot: 2 Flags: fast devsel, IRQ 10 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at fd020000 (32-bit, non-prefetchable) [size=8K] I/O ports at c5a0 [size=32] Memory at ffe0000000 (64-bit, prefetchable) [size=256M] Expansion ROM at fd000000 [disabled] [size=64K] [ mapping above 4G needs patched seabios: http://www.kraxel.org/cgit/seabios/commit/?h=pci64 ]
-
- 27 2月, 2012 5 次提交
-
-
由 Alon Levy 提交于
RHBZ# 747011 Removes the last user of QXL_SYNC when using update drivers that use the _ASYNC io ports. The last user is qxl_render_update, it is called both by qxl_hw_update which is the vga_hw_update_ptr passed to graphic_console_init, and by qxl_hw_screen_dump. At the same time the QXLRect area being passed to the red_worker thread is passed as a copy, as part of the QXLCookie. The implementation uses interface_update_area_complete with a bh to make sure dpy_update and qxl_flip are called from the io thread, otherwise the vga->ds->surface.data can change under our feet. With this patch sdl+spice works fine. But spice by itself doesn't produce the expected screendumps unless repeated a few times, due to ppm_save being called before update_area (rendering done in spice server thread) having a chance to complete. Fixed by next patch, but see commit message for problem introduced by it. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Will be used in the next patch. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Tested on linux and windows guests. For negative stride, qxl_flip copies directly to vga->ds->surface->data, for positive it's reallocated to share qxl->guest_primary.data Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result, any check for SPICE_SERVER_VERSION that is now always satisfied, and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because 0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and SPICE_INTERFACE_CORE_MINOR == 3. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
It was never used. Introduced in 5ff4e36c qxl: async io support using new spice api But not used even then. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 21 2月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
Add two properties to specify bar sizes in megabytes instead of bytes, which is alot more user-friendly. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Gerd Hoffmann 提交于
spice uses negative stride value to signal the bitmap is upside down. The qxl renderer (used for scl, vnc and screenshots) wants a positive value because it is easier to work with. The positive value is then stored in the very same variable, which has the drawback that the upside-down test works only once. Fix by using two variables. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 25 10月, 2011 1 次提交
-
-
由 Jan Kiszka 提交于
Use QEMU thread API instead of pthread directly. We still need to get rid of pthread_yield, though, to drop pthread.h inclusion. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 08 8月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Convert all vga memory to the memory API. Note we need to fall back to get_system_memory(), since the various buses don't pass the vga window as a memory region. We no longer need to sync the dirty bitmap of the cirrus mapped memory banks, since the memory API takes care of that for us. [jan: fix vga-pci logging] Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 03 8月, 2011 2 次提交
-
-
由 Gerd Hoffmann 提交于
Inform guest drivers about the new features I/O commands we have now (async commands, S3 support) if building with newer spice, i.e. if SPICE_INTERFACE_QXL_MINOR >= 1. sneaked in some 81+ column line spliting. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAlon Levy <alevy@redhat.com>
-
由 Alon Levy 提交于
Some of the QXL port i/o commands are waiting for the spice server to complete certain actions. Add async versions for these commands, so we don't block the vcpu while the spice server processses the command. Instead the qxl device will raise an IRQ when done. The async command processing relies on an added QXLInterface::async_complete and added QXLWorker::*_async additions, in spice server qxl >= 3.1 Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAlon Levy <alevy@redhat.com>
-
- 01 8月, 2011 4 次提交
-
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Add qxl_guest_bug() function which is supposed to be called in case sanity checks of guest requests fail. It raises an error IRQ and logs a message in case guest debugging is enabled. Make PANIC_ON() abort instead of exit. That macro should be used for qemu bugs only, any guest-triggerable stuff should use the new qxl_guest_bug() function instead. Convert a few easy cases from PANIC_ON() to qxl_guest_bug() to show intended usage. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Surface tracking needs proper locking since it is used from vcpu and spice worker threads, add it. Also reset the surface counter when zapping all surfaces. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Move the wrapper functions which are used by qxl only to qxl.c. Rename them from qemu_spice_* to qxl_spice_*. Also pass in a qxl state pointer instead of a SimpleSpiceDisplay pointer. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 24 1月, 2011 1 次提交
-
-
由 Gerd Hoffmann 提交于
Live migration from and to spice 0.4 qxl devices isn't going to work. Rip out the bits which attempt to support that. Zap the subsection logic which is obsolete now. Bumb the version to make a clean cut. This should obviously go in before 0.14 is released. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 09 12月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
qxl is a paravirtual graphics card. The qxl device is the bridge between the guest and the spice server (aka libspice-server). The spice server will send the rendering commands to the spice client, which will actually render them. The spice server is also able to render locally, which is done in case the guest wants read something from video memory. Local rendering is also used to support display over vnc and sdl. qxl is activated using "-vga qxl". qxl supports multihead, additional cards can be added via '-device qxl". [ v2: add copyright to files ] [ v2: use qemu-common.h for standard includes ] [ v2: create separate qxl-vga device for primary ] Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-