Add kvm_s390_{vcpu,floating}_interrupt, which offer the possibility
to inject interrupts with larger payloads (when a kvm backend becomes
available).

Moreover, kvm_s390_floating_interrupt() does no longer have the bogus
requirement for a vcpu.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Move the injection code for all floating interrupts to interrupt.c
and add a comment.

Also get rid of the #ifdef CONFIG_KVM for the service interrupt.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch adds live migration support for virtio-ccw devices.
It's not done with vmstate because virtio itself is not yet ported
to vmstate either.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The kernel only drops to userspace if an endless program interrupt loop
has been detected. Let's print an error message in this case to inform
the user about the crash and stop the affected CPU with a panic event,
just like it is already done for the external interruption loop detection.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Interception code 0x14 only drops to userspace when an unmanageable
external interruption interception occured (e.g. if the External New
PSW does not disable external interruptions). Instead of bailing out
via the default handler, it is better to inform the user with a
proper error message that also includes the bad PSW, and to stop
the affected CPU with a panic event instead.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Exploit the new api for userspace-controlled cmma. If supported, enable
cmma during kvm initialization and register a reset handler for cmma,
which is also called directly from the load IPL code.

The reset functionality is needed to reset the cmma state of the guest
pages, e.g. if a system reset is triggered via qemu monitor; otherwise
this could result in data corruption.

A guest triggered reboot may now lead to multiple cmma resets; this is
OK, however, as this is slowpath anyway and the simplest way to achieve
the intended effects.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

If we run with an old kernel that does not support KVM_CAP_IRQ_ROUTING,
we don't have to do anything in the ->register_io_adapter and
->io_adapter_map callbacks and therefore should return 0 instead of
-ENOSYS (just as the non-kvm flic does).

This fixes using adapter interrupts when running under an older kernel,
which broke with "s390x: add I/O adapter registration".
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We should not try to store the emw portion of the irb if extended
measurements are not applicable. In particular, we should not surprise
the guest by storing a larger irb if it did not enable extended
measurements.

Cc: qemu-stable@nongnu.org
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

```-------------------------------------------------------------
target-arm queue:
 * support -bios option in vexpress boards
 * register the Cortex-A57 impdef system registers
 * fix handling of UXN bit in ARMv8 page tables
 * complete support of crypto insns in A32/T32
 * implement CRC and crypto insns in A64
 * fix bugs in generic timer control register
```

-------------------------------------------------------------

# gpg: Signature made Mon 09 Jun 2014 16:08:26 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140609-1:
  target-arm: Delete unused iwmmxt_msadb helper
  target-arm: Fix errors in writes to generic timer control registers
  target-arm: A64: Implement two-register SHA instructions
  target-arm: A64: Implement 3-register SHA instructions
  target-arm: A64: Implement AES instructions
  target-arm: A32/T32: Mask CRC value in calling code, not helper
  target-arm: A64: Implement CRC instructions
  target-arm: VFPv4 implies half-precision extension
  target-arm: Clean up handling of ARMv8 optional feature bits
  target-arm: Remove unnecessary setting of feature bits
  target-arm: arm_any_initfn() should never set ARM_FEATURE_AARCH64
  target-arm: A64: Use PMULL feature bit for PMULL
  target-arm: add support for v8 VMULL.P64 instruction
  target-arm: Allow 3reg_wide undefreq to encode more bad size options
  target-arm: add support for v8 SHA1 and SHA256 instructions
  target-arm: Correct handling of UXN bit in ARMv8 LPAE page tables
  target-arm: Prepare cpreg writefns/readfns for EL3/SecExt
  target-arm/cpu64.c: Actually register Cortex-A57 impdef registers
  vexpress: Add support for the -bios flag to provide firmware
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Tracing pull request

# gpg: Signature made Mon 09 Jun 2014 14:44:18 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace: Replace fprintf with error_report and print location
  trace: Multi-backend tracing
  trace: Replace error with warning if event is not defined
  simpletrace: add support for trace record pid field
  trace: add pid field to simpletrace record
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The iwmmxt_msadb helper and its corresponding gen function are unused;
delete them. (This function appears to have never been used right back
to the initial implementation of iwMMXt; it is identical to iwmmxt_madduq,
and is presumably an accidental remnant from the initial development.)
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401822125-1822-1-git-send-email-peter.maydell@linaro.org

The code for handling writes to the generic timer control registers
had several bugs:
 * ISTATUS (bit 2) is read-only but we forced it to zero on any write
 * the check for "was IMASK (bit 1) toggled?" incorrectly used '&' where
   it should be '^'
 * the handling of IMASK was inverted: we should set the IRQ if
   ISTATUS is set and IMASK is clear, not if both are set

The combination of these bugs meant that when running a Linux guest
that uses the generic timers we would fairly quickly end up either
forgetting that the timer output should be asserted, or failing to
set the IRQ when the timer was unmasked. The result is that the guest
never gets any more timer interrupts.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401803208-1281-1-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org

Implement the two-register SHA instruction group from the optional
Crypto Extensions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-10-git-send-email-peter.maydell@linaro.org

Implement the 3-register SHA instruction group from the optional
Crypto Extensions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-9-git-send-email-peter.maydell@linaro.org

Implement the AES instructions from the optional Crypto Extensions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-8-git-send-email-peter.maydell@linaro.org

Bring the 32-bit CRC helper functions into line with the A64 ones,
by masking the high bytes of the value in the calling code rather
than the helper. This is more efficient since we can determine the
mask at translation time.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-7-git-send-email-peter.maydell@linaro.org

Implement the optional A64 CRC instructions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-6-git-send-email-peter.maydell@linaro.org

VFPv4 implies the presence of the half-precision floating point
extension (which is optional in VFPv3). Add this implied rule
to arm_cpu_realizefn() and remove some no-longer-needed explicit
setting of the bit in initfns.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-5-git-send-email-peter.maydell@linaro.org

CRC and crypto are both optional v8 extensions, so FEATURE_V8
should not imply them. Instead we should set these bits in the
initfns for the 32-bit and 64-bit "cpu any" and for the Cortex-A57.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-4-git-send-email-peter.maydell@linaro.org

FEATURE_V8 implies both FEATURE_V7MP and FEATURE_ARM_DIV, so
we don't need to set them explicitly in initfns which set the
V8 feature bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-3-git-send-email-peter.maydell@linaro.org

The arm_any_initfn() is used only for the 32-bit linux-user "cpu any",
so it only gets called in builds where TARGET_AARCH64 is not defined.
Remove the unreachable line which sets ARM_FEATURE_AARCH64.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-2-git-send-email-peter.maydell@linaro.org

Now that we have a separate ARM_FEATURE_V8_PMULL bit, use it for
the A64 PMULL, not the AES feature bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the VMULL.P64 polynomial 64x64 to 128 bit multiplication
instruction in the A32/T32 instruction sets; this is part of the v8
Crypto Extensions.

To do this we have to move the neon_pmull_64_{lo,hi} helpers from
helper-a64.c into neon_helper.c so they can be used by the AArch32
translator.
Inspired-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-4-git-send-email-peter.maydell@linaro.org

The current undefreq field in the neon_3reg_wide handling allows us
to encode "UNDEF if size != 0" and "UNDEF if size == 0". This is
no longer sufficient with the advent of 64-bit polynomial VMULL,
which means we want to UNDEF if size == 1. Change the undefreq
encoding to use separate bits for all of "UNDEF if size == 0",
"UNDEF if size == 1" and "UNDEF if size == 2".
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-3-git-send-email-peter.maydell@linaro.org

This adds support for the SHA1 and SHA256 instructions that are available
on some v8 implementations of Aarch32.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-2-git-send-email-peter.maydell@linaro.org
[PMM:
 * rebase
 * fix bad indent
 * add a missing UNDEF check for Q!=1 in the 3-reg SHA1/SHA256 case
 * use g_assert_not_reached()
 * don't re-extract bit 6 for the 2-reg-misc encodings
 * set the ELF HWCAP2 bits for the new features
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In v8 page tables bit 54 in the PTE is UXN in the EL0/EL1 translation regimes
and XN elsewhere. In v7 the bit is always XN. Since we only emulate EL0/EL1 we
can just treat this bit as UXN whenever we are in v8 mode.

Also correctly extract the upper attributes from the PTE entry, the v8 version
tried to avoid extracting the CONTIG bit and ended up with the upper bits being
off-by-one. Instead behave the same as v7 and extract (but ignore) the CONTIG
bit.

This fixes "Bad mode in Synchronous Abort handler detected, code 0x8400000f"
seen when modprobing modules under Linux.
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Claudio Fontana <claudio.fontana@huawei.com>
Cc: Rob Herring <robherring2@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch changes some readfns/writefns to use raw_write
and raw_read functions, which use the fieldoffset specified
in ARMCPRegInfo instead of directly accessing the field.
This will simplify patches for EL3 & Security Extensions.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NFabian Aggeler <aggelerf@ethz.ch>
Message-id: 1401962428-14749-1-git-send-email-aggelerf@ethz.ch
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

cpu64.c contains a reginfo list for the impdef registers on
the Cortex-A57; however we forgot to actually call define_arm_cp_regs(),
so it was sitting there doing nothing. Remedy this omission.

Message-id: 1401226259-23121-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Right now to run firmware inside the QEMU VExpress model requires
padding out the firmware image to the size of the virtual flash and
passing it in via the -pflash argument. If the firmware image is passed
without padding, then QEMU will fail. Also, when passed as a -pflash
argument, QEMU treats the file as persistent storage and will modify the
file.

The -bios flag provides the semantics that we want for providing a
firmware image. This patch maps the contents of the -bios file into the
address space at the boot flash location.

Tested with the vexpress-a15 model and the Tianocore port.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Tested-by: NRoy Franz <roy.franz@linaro.org>
[PMM: folded long line, removed stray \n from error message,
 use correct variable for printing image name, exit(1) rather than 0]
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Net patches

# gpg: Signature made Mon 09 Jun 2014 14:41:34 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  e1000: remove broken support for 82573L
  tests: e1000: test additional device IDs
  e1000: allow command-line selection of card model
  vmxnet3: fix msix vectors unuse
  net: xilinx_ethlite: Fix Rx-pong interrupt
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This replaces fprintf(stderr) with error_report.

This moves local variables to the beginning of the function to comply
with QEMU's coding style.
Suggested-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Adds support to compile QEMU with multiple tracing backends at the same time.

For example, you can compile QEMU with:

  $ ./configure --enable-trace-backends=ftrace,dtrace

Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.

This patch allows having both available without recompiling QEMU.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

At the moment QEMU exits if trace point is not defined which makes
a developer life harder if he has to switch between branches with
different traces implemented.

This replaces error+exit wit WARNING if the tracepoint does not exist or
not traceable.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Extract the pid field from the trace record and print it.

Change the trace record tuple from:
  (event_num, timestamp, arg1, ..., arg6)
to:
  (event_num, timestamp, pid, arg1, ..., arg6)

Trace event methods now support 3 prototypes:
1. <event-name>(arg1, arg2, arg3)
2. <event-name>(timestamp, arg1, arg2, arg3)
3. <event-name>(timestamp, pid, arg1, arg2, arg3)

Existing script continue to work without changes, they only know about
prototypes 1 and 2.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It is useful to know the QEMU process ID when working with traces from
multiple VMs.  Although the trace filename may contain the pid, tools
that aggregate traces or even trace globally need somewhere to record
the pid.

There is a reserved field in the trace event header struct that we can
use.

It is not necessary to bump the simpletrace file format version number
because it has already been incremented for the QEMU 2.1 release cycle
in commit "trace: [simple] Bump up log version number".
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently, e1000 support is based on the manual for the 8254xx
model series. 82573x models are documented in a separate manual
(see http://www.intel.com/content/dam/www/public/us/en/documents/manuals/pcie-gbe-controllers-open-source-manual.pdf)
and the 82573L device ID no longer works correctly on either Linux
(3.14.*) or Windows 7.

This patch removes stale code claiming to support 82573L, cleaning
up the code base for the remaining 8254xx model series.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Update e1000-test.c to check all currently supported devices.
Suggested-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Allow selection of different card models from the qemu
command line, to better accomodate a wider range of guests.
Signed-off-by: NRomain Dolbeau <romain@dolbeau.org>
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In vmxnet3_cleanup_msix(), there is called msix_vector_unuse() with
VMXNET3_MAX_INTRS. That is not correct since vector of
value VMXNET3_MAX_INTRS was never used. Also all the used vectors
are not un-used. So call vmxnet3_unuse_msix_vectors() instead which
does the correct job.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Acked-by: NDmitry Fleytman <dmitry@daynix.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

There is no CTRL_I bit in the pong buffer control register. The
CTRL_I bit from the ping buffer masks both ping and pong buffers.
Fix.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>