- 02 7月, 2019 13 次提交
-
-
由 Stephen Checkoway 提交于
Most AMD commands only examine 11 bits of the address. This masks the addresses used in the comparison to 11 bits. The exceptions are word or sector addresses which use offset directly rather than the shifted offset, boff. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-4-stephen.checkoway@oberlin.edu> Acked-by: NThomas Huth <thuth@redhat.com> Acked-by: NAlistair Francis <alistair.francis@wdc.com> Acked-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
The pflash_read()/pflash_write() can check the device endianess via the pfl->be variable, so remove the 'int be' argument. Since the big/little MemoryRegionOps are now identical, it is pointless to declare them both. Unify them. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch to ease review] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Extract the code block in a new function, remove a goto statement. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch, remove the XXX tracing comment] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
The load/store API eases code review. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch, simplified tracing] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
The load/store API eases code review. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Pull out all of the code to modify the status into simple helper functions. Status handling becomes more complex once multiple chips are interleaved to produce a single device. No change in functionality is intended with this commit. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
No change in functionality is intended with this commit. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Always compile the debug code to prevent format string to bitrot. Delete dead code. Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch, use PRIx32] Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Use a field width format to have a single function to log the different width accesses. Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Message-Id: <20190627202719.17739-4-philmd@redhat.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Call the read() trace function after the value is set, so we can log the returned value. Rename the I/O trace functions with '_io_' in their name. Reviewed-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Message-Id: <20190627202719.17739-3-philmd@redhat.com> Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Stephen Checkoway 提交于
Test the AMD command set for parallel flash chips. This test uses an ARM musicpal board with a pflash drive to test the following list of currently-supported commands. - Autoselect - CFI - Sector erase - Chip erase - Program - Unlock bypass - Reset Signed-off-by: NStephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-2-stephen.checkoway@oberlin.edu> Acked-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> [PMD: reworded the patch subject, g_assert_cmpint -> cmphex] Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Peter Maydell 提交于
configure improvements and fixes MAINTAINERS update # gpg: Signature made Wed 26 Jun 2019 21:02:10 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-patches-pull-request: MAINTAINERS: Change maintership of Xen code under hw/9pfs configure: use valid args testing sem_timedwait configure: disallow spaces and colons in source path and build path configure: set source_path only once and make its definition more robust Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 01 7月, 2019 6 次提交
-
-
由 Peter Maydell 提交于
remove m68k simulator syscall interface Fix comments format Fix gdbstub # gpg: Signature made Wed 26 Jun 2019 17:20:41 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-next-pull-request: linux-user/m68k: remove simulator syscall interface m68k comments break patch submission due to being incorrectly formatted The m68k gdbstub SR reg request doesnt include Condition-Codes Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Update ppc64 feature and default CPU next setsockops() options Improve "-L" option Another fix for 5.2-rc1 headers # gpg: Signature made Wed 26 Jun 2019 13:11:04 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-4.1-pull-request: linux-user: set default PPC64 CPU linux-user: update PPC64 HWCAP2 feature list linux-user: Add support for setsockopt() options IPV6_<ADD|DROP>_MEMBERSHIP linux-user: Add support for setsockopt() option SOL_ALG linux-user: emulate msgsnd(), msgrcv() and semtimedop() util/path: Do not cache all filenames at startup Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
MIPS queue for June 2016th, 2019 # gpg: Signature made Wed 26 Jun 2019 12:38:58 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-jun-26-2019: target/mips: Fix big endian host behavior for interleave MSA instructions tests/tcg: target/mips: Fix some test cases for pack MSA instructions tests/tcg: target/mips: Add support for MSA MIPS32R6 testings tests/tcg: target/mips: Add support for MSA big-endian target testings tests/tcg: target/mips: Amend tests for MSA int multiply instructions tests/tcg: target/mips: Amend tests for MSA int dot product instructions tests/tcg: target/mips: Add tests for MSA move instructions tests/tcg: target/mips: Add tests for MSA bit move instructions dma/rc4030: Minor code style cleanup dma/rc4030: Fix off-by-one error in specified memory region size hw/mips/gt64xxx_pci: Align the pci0-mem size hw/mips/gt64xxx_pci: Convert debug printf()s to trace events hw/mips/gt64xxx_pci: Use qemu_log_mask() instead of debug printf() hw/mips/gt64xxx_pci: Fix 'spaces' coding style issues hw/mips/gt64xxx_pci: Fix 'braces' coding style issues hw/mips/gt64xxx_pci: Fix 'tabs' coding style issues hw/mips/gt64xxx_pci: Fix multiline comment syntax Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* Add FTOIZ/UTOF/QSEED insns * Fix sync of hflags and swapped args of RRPW_INSERT # gpg: Signature made Tue 25 Jun 2019 14:05:03 BST # gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14 # gpg: issuer "kbastian@mail.uni-paderborn.de" # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [full] # Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14 * remotes/bkoppelmann2/tags/pull-tricore-20190625: tricore: add QSEED instruction tricore: sync ctx.hflags with tb->flags tricore: fix RRPW_INSERT instruction tricore: add UTOF instruction tricore: add FTOIZ instruction Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Xen queue * Fix build * xen-block: support feature-large-sector-size * xen-block: Support IOThread polling for PV shared rings * Avoid usage of a VLA * Cleanup Xen headers usage # gpg: Signature made Mon 24 Jun 2019 16:30:32 BST # gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF # gpg: issuer "anthony.perard@citrix.com" # gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal] # gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8 # Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF * remotes/aperard/tags/pull-xen-20190624: xen: Import other xen/io/*.h Revert xen/io/ring.h of "Clean up a few header guard symbols" xen: Drop includes of xen/hvm/params.h xen: Avoid VLA xen-bus / xen-block: add support for event channel polling xen-bus: allow AioContext to be specified for each event channel xen-bus: use a separate fd for each event channel xen-block: support feature-large-sector-size Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Block patches: - The SSH block driver now uses libssh instead of libssh2 - The VMDK block driver gets read-only support for the seSparse subformat - Various fixes # gpg: Signature made Mon 24 Jun 2019 15:42:56 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-06-24: iotests: Fix 205 for concurrent runs ssh: switch from libssh2 to libssh vmdk: Add read-only support for seSparse snapshots vmdk: Reduce the max bound for L1 table size vmdk: Fix comment regarding max l1_size coverage iotest 134: test cluster-misaligned encrypted write blockdev: enable non-root nodes for transaction drive-backup source nvme: do not advertise support for unsupported arbitration mechanism Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 27 6月, 2019 4 次提交
-
-
由 Greg Kurz 提交于
Xen folks are the actual maintainers for this. Signed-off-by: NGreg Kurz <groug@kaod.org> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Acked-by: NAnthony PERARD <anthony.perard@citrix.com> Acked-by: NPaul Durrant <paul.durrant@citrix.com> Acked-by: NStefano Stabellini <sstabellini@kernel.org> Message-Id: <155912548463.2019004.3515830305299809902.stgit@bahia.lan> Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
-
由 Daniel P. Berrangé 提交于
The sem_timedwait function has been annotated as requiring non-null args in latest header files from GCC snapshot representing the future 2.30 release. This causes configure to fail when -Werror is used: config-temp/qemu-conf.c: In function ‘main’: config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 1) [-Werror=nonnull] 2 | int main(void) { return sem_timedwait(0, 0); } | ^~~~~~~~~~~~~ config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 2) [-Werror=nonnull] Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Message-Id: <20190617114114.24897-1-berrange@redhat.com> Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
-
由 Antonio Ospite 提交于
The configure script breaks when the qemu source directory is in a path containing white spaces, in particular the list of targets is not correctly generated when calling "./configure --help" because of how the default_target_list variable is built. In addition to that, *building* qemu from a directory with spaces breaks some assumptions in the Makefiles, even if the original source path does not contain spaces like in the case of an out-of-tree build, or when symlinks are involved. To avoid these issues, refuse to run the configure script and the Makefile if there are spaces or colons in the source path or the build path, taking as inspiration what the kbuild system in linux does. Buglink: https://bugs.launchpad.net/qemu/+bug/1817345Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NAntonio Ospite <antonio.ospite@collabora.com> Message-Id: <20190526144747.30019-3-ao2@ao2.it> Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
-
由 Antonio Ospite 提交于
Since commit 79d77bcd (configure: Remove --source-path option, 2019-04-29) source_path cannot be overridden anymore, move it out of the "default parameters" block since the word "default" may suggest that the value can change, while in fact it does not. While at it, only set source_path once and separate the positional argument of basename with "--" to more robustly cover the case of path names starting with a dash. Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NAntonio Ospite <antonio.ospite@collabora.com> Message-Id: <20190526144747.30019-2-ao2@ao2.it> Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
-
- 26 6月, 2019 17 次提交
-
-
由 Laurent Vivier 提交于
This interface has been introduced in 2005 with the coldfire implementation (e6e5906b ColdFire target.) and looks like to do what the linux-user interface already does with the TRAP exception rather than the ILLEGAL exception. This interface has not been maintained since that. The semi-hosting interface is not removed so coldfire kernel with semi-hosting is always supported. Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Message-Id: <20190524162049.806-1-laurent@vivier.eu> Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
-
由 Lucien Murray-Pitts 提交于
Altering all comments in target/m68k to match Qemu coding styles so that future patches wont fail due to style breaches. Signed-off-by: NLucien Murray-Pitts <lucienmp.qemu@gmail.com> Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Message-Id: <20190606234125.GA4830@localhost.localdomain> Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
-
由 Lucien Murray-Pitts 提交于
The register request via gdbstub would return the SR part which contains the Trace/Master/IRQ state flags, but would be missing the CR (Condition Register) state bits. This fix adds this support by merging them in the m68k specific gdbstub handler m68k_cpu_gdb_read_register for SR register. Signed-off-by: NLucien Murray-Pitts <lucienmp.qemu@gmail.com> Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Message-Id: <20190609105154.GA16755@localhost.localdomain> Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
-
由 Aleksandar Markovic 提交于
Fix big endian host behavior for interleave MSA instructions. Previous fix used TARGET_WORDS_BIGENDIAN instead of HOST_WORDS_BIGENDIAN, which was a mistake. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-9-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Fix certian test cases for MSA pack instructions. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-8-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Add files for MSA MIPS32R6 target testings (copiling and running). Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-7-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Add files for MSA big-endian target testings (copiling and running). Little-endian files are renamed and ammended too. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-6-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Amend tests for MSA int multiply instructions. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-5-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Add tests for instructions whose result depends on the value in destination register (prior to instruction execution). Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-4-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Add tests for MSA move instructions. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-3-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Add tests for MSA bit move instructions. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-2-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
Fix some simple checkpatch.pl warnings in rc4030.c. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1561472838-32272-3-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Aleksandar Markovic 提交于
The size is one byte less than it should be: address-space: rc4030-dma 0000000000000000-00000000fffffffe (prio 0, i/o): rc4030.dma rc4030 is used in MIPS Jazz board context. Signed-off-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NAleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1561472838-32272-2-git-send-email-aleksandar.markovic@rt-rk.com>
-
由 Philippe Mathieu-Daudé 提交于
One byte is missing, use an aligned size. (qemu) info mtree memory-region: pci0-mem 0000000000000000-00000000fffffffe (prio 0, i/o): pci0-mem ^ Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NAleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190624222844.26584-8-f4bug@amsat.org>
-
由 Philippe Mathieu-Daudé 提交于
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NAleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190624222844.26584-7-f4bug@amsat.org>
-
由 Philippe Mathieu-Daudé 提交于
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NAleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190624222844.26584-6-f4bug@amsat.org>
-
由 Philippe Mathieu-Daudé 提交于
Since we'll move this code around, fix its style first: ERROR: space prohibited between function name and open parenthesis ERROR: line over 90 characters Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NAleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190624222844.26584-5-f4bug@amsat.org>
-