Sufficiently recent PAPR specifications define properties "ibm,vmx"
and "ibm,dfp" on the CPU node which advertise whether the VMX vector
extensions (or the later VSX version) and/or the Decimal Floating
Point operations from IBM's recent POWER CPUs are available.

Currently we do not put these in the guest device tree and the guest
kernel will consequently assume they are not available.  This is good,
because they are not supported under TCG.  VMX is similar enough to
Altivec that it might be trivial to support, but VSX and DFP would
both require significant work to support in TCG.

However, when running under kvm on a host which supports these
instructions, there's no reason not to let the guest use them.  This
patch, therefore, checks for the relevant support on the host CPU
and, if present, advertises them to the guest as well.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the kvmppc_get_clockfreq() function reads the host's clock
frequency from /proc/device-tree, which is useful to past to the guest
in KVM setups.  However, there are some other host properties
advertised in the device tree which can also be relevant to the
guests.

This patch, therefore, replaces kvmppc_get_clockfreq() which can
retrieve any named, single integer property from the host device
tree's CPU node.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

SPE instructions are defined by pairs. Currently, the invalid-bits mask is set
for the first instruction, but the second one can have a different mask.

example:
GEN_SPE(efdcmpeq,    efdcfs,      0x17, 0x0B, 0x00600000, 0x00180000, PPC_SPE_DOUBLE),
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch updates the SLOF submodule and precompiled image.  The new
SLOF versions contains two changes of note:

 * The previous SLOF has a bug in SCSI condition handling that was
   exposed by recent updates to qemu's SCSI emulation.  This update
   fixes the bug.

 * The previous SLOF has a bug in its addressing of SCSI devices,
   which can be exposed under certain conditions.  The new SLOF also
   fixes this.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The pseries machine of qemu implements the TCE mechanism used as a
virtual IOMMU for the PAPR defined virtual IO devices.  Because the
PAPR spec only defines a small DMA address space, the guest VIO
drivers need to update TCE mappings very frequently - the virtual
network device is particularly bad.  This means many slow exits to
qemu to emulate the H_PUT_TCE hypercall.

Sufficiently recent kernels allow this to be mitigated by implementing
H_PUT_TCE in the host kernel.  To make use of this, however, qemu
needs to initialize the necessary TCE tables, and map them into itself
so that the VIO device implementations can retrieve the mappings when
they access guest memory (which is treated as a virtual DMA
operation).

This patch adds the necessary calls to use the KVM TCE acceleration.
If the kernel does not support acceleration, or there is some other
error creating the accelerated TCE table, then it will still fall back
to full userspace TCE implementation.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At present, using the hypervisor aware Book3S-HV KVM will only work
with qemu on POWER7 CPUs.  PPC970 CPUs also have hypervisor
capability, but they lack the VRMA feature which makes assigning guest
memory easier.

In order to allow KVM Book3S-HV on PPC970, we need to specially
allocate the first chunk of guest memory (the "Real Mode Area" or
RMA), so that it is physically contiguous.

Sufficiently recent host kernels allow such contiguous RMAs to be
allocated, with a kvm capability advertising whether the feature is
available and/or necessary on this hardware.  This patch enables qemu
to use this support, thus allowing kvm acceleration of pseries qemu
machines on PPC970 hardware.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

---

agraf: fix to use memory api

Alex Graf has already made qemu support KVM for the pseries machine
when using the Book3S-PR KVM variant (which runs the guest in
usermode, emulating supervisor operations).  This code allows gets us
very close to also working with KVM Book3S-HV (using the hypervisor
capabilities of recent POWER CPUs).

This patch moves us another step towards Book3S-HV support by
correctly handling SMT (multithreaded) POWER CPUs.  There are two
parts to this:

 * Querying KVM to check SMT capability, and if present, adjusting the
   cpu numbers that qemu assigns to cause KVM to assign guest threads
   to cores in the right way (this isn't automatic, because the POWER
   HV support has a limitation that different threads on a single core
   cannot be in different guests at the same time).

 * Correctly informing the guest OS of the SMT thread to core mappings
   via the device tree.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When access PPCE500_PCI_IW1 the previous index get overflow.
The patch fix the issue and update all to keep consistent style.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Put trailing statements on next line.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Reviewed-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If the deposit replaces the entire word, optimize to a move.

If we're inserting to the top of the word, avoid the mask of arg2
as we'll be shifting out all of the garbage and shifting in zeros.

If the host is 32-bit, reduce a 64-bit deposit to a 32-bit deposit
when possible.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

this patch fix multiple issues with VirtFS tracing.
a) Add tracepoint to the correct code path. We handle error in complete_pdu
b) Fix indentation in python script
c) Fix variable naming issue in python script
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Adding an offset to a void pointer works with gcc but is not allowed
by the current C standards. With -pedantic, gcc complains:

exec-all.h:344: error: pointer of type ‘void *’ used in arithmetic

Fix this, and also replace (unsigned long) by (uintptr_t) in the same
statement.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

linux-headers/asm is a symlink generated during configure.  It should not,
therefore be committed to git, nor show up in git diffs and the like.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'rth/vis2' of git://repo.or.cz/qemu/rth:
  target-sparc: Implement FALIGNDATA inline.
  target-sparc: Implement BMASK/BSHUFFLE.
  target-sparc: Implement ALIGNADDR* inline.
  target-sparc: Implement EDGE* instructions.
  target-sparc: Implement fpack{16,32,fix}.
  target-sparc: Implement PDIST.
  target-sparc: Do exceptions management fully inside the helpers.
  target-sparc: Change fpr representation to doubles.
  target-sparc: Undo cpu_fpr rename.
  target-sparc: Extract float128 move to a function.
  target-sparc: Extract common code for floating-point operations.
  target-sparc: Make FPU/VIS helpers const when possible.
  target-sparc: Pass float64 parameters instead of dt0/1 temporaries.
  target-sparc: Add accessors for double-precision fpr access.
  target-sparc: Mark fprs dirty in store accessor.
  target-sparc: Add accessors for single-precision fpr access.

This is a relatively simple sequence of shifts.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not
implemeneted at all.  However, this is a very simple operation
so we're better off doing this inline.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

This reduces the size of the individual translation blocks, since
we only emit a single call for each FOP rather than three.  In
addition, clear_float_exceptions expands inline to a single byte store.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

This also removes the unused ENV parameter from these helpers.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Begin using i64 quantities to manipulate double-precision values.
On a 64-bit host this will, for the moment, generate less efficient
code; on a 32-bit host code quality should be largely unchanged.
Code quality for 64-bit will be adjusted with a subsequent patch.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Load, store, and "create destination".  This version attempts to
change the behaviour of the translator as little as possible.  We
previously used cpu_tmp32 as the temporary destination, and we
continue to use that.  This will eventually allow a change in
representation of the fprs.

Change the name of the cpu_fpr array to make certain that all
instances are converted.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Move load and store op helpers top ldst_helper.c.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move MMU helpers to mmu_helper.c.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Before the next patch, fix coding style of the areas affected.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make [su]div{,cc} helpers take a parameter for CPUState instead
of relying on global env. Move the functions to helper.c.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make softint op helpers and Leon cache irq manager take a parameter
for CPUState instead of relying on global env. Move the functions
to int{32,64}_helper.c.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>