Adjust TMPO and added TMPB, TMPL, and TMPA.  libtool needs the names
to be fixed (TMPB).

Add new functions do_libtool and libtool_prog.

Add check for broken gcc and libtool.
Signed-off-by: NDon Slutz <dslutz@verizon.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The converted block drivers are:

    curl
    iscsi
    rbd
    ssh
    glusterfs
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds loading, stamp checking and initialization of modules.

The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:

    qemu_stamp_$RELEASEHASH

where $RELEASEHASH is generated by hashing version strings and content
of configure script.

With this, modules built from a different tree/version/configure will
not be loaded.

The module loading code requires gmodule-2.0.

Modules are searched under
 - CONFIG_MODDIR
 - executable folder (to allow running qemu-{img,io} in the build
   directory)
 - ../ of executable folder (to allow running system emulator in the
   build directory)

Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
    $(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add necessary rules and flags for shared object generation.
The new rules introduced here are:

1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.

2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:

    foo.mo-objs := bar.o baz.o qux.o

in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.

3) For all files ending up in %.so, the following is added automatically:

    foo.o-cflags += -fPIC -DBUILD_DSO

Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

While -mdynamic-no-pic can speed up the code somewhat, it is only used
on the legacy PowerPC Mac OS X, and I am not sure if anyone is still
testing that.  Disabling PIC can cause problems when enabling modules,
so do not do that.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.

This removes unwanted dependencies from libcacard.
Signed-off-by: NFam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:

    $(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)

Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.

The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:

>From the OpenBSD buildbots..
  Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC

Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Modify feature_not_found to accept an optional second parameter to be
printed after the generic feature not found error.

Modify most calls to feature_not_found to provide hints as to the
packages that may be missing. The few calls remaining without a remedy
are ones I couldn't work out how to remedy myself.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Most distros package it as libfdt, and mentioning libfdt here makes it
much easier to find the package you're missing.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.

NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[&param2=value2[&...]]]

For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2

You need LibNFS from Ronnie Sahlberg available at:
   git://github.com/sahlberg/libnfs.git
for this to work.

During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.

Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.

For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
   https://raw.github.com/sahlberg/libnfs/master/README

Supported by qemu are the uid, gid and tcp-syncnt URL parameters.

LibNFS currently support NFS version 3 only.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
[PMM:
 * added support for target disassembly
 * switched to custom QEMUDisassembler so the output format
   matches what QEMU expects
 * make sure we correctly fall back to "just print hex"
   if we didn't build the AArch64 disassembler because of
   lack of a C++ compiler
 * rename from 'aarch64' to 'arm-a64' because this is a
   disassembler for the A64 instruction set
 * merge aarch64.c and aarch64-cxx.cc into one C++ file
 * simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Ensure configure will set-up links for the files
if the build is created in other directory.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The help message uses $python and displays its value, so that macro
should be tested and set early.

With this modification, configure --help displays the correct value
(usually python -B) and no longer creates several *.pyc files.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

In the new form most lines of the code now look like the final output:
there is no leading echo command and the lines are shorter.

The resulting output is nearly identical: the only difference is a blank
character which was deliberately removed:

@@ -8,7 +8,7 @@
   --interp-prefix=PREFIX   where to find shared libraries, etc.
                            use %M for cpu name [/usr/gnemul/qemu-%M]
   --target-list=LIST       set target list (default: build everything)
-                           Available targets:  alpha-softmmu arm-softmmu
+                           Available targets: alpha-softmmu arm-softmmu
                            cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu
                            microblaze-softmmu microblazeel-softmmu mips-softmmu
                            mips64-softmmu mips64el-softmmu mipsel-softmmu
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.

libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.

To compile QEMU with netmap support, use the following configure
options:
    ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
    http://info.iet.unipi.it/~luigi/netmap/

The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: NVincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.

The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.

Fix this up.
Tested-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.

Thanks to Paul Smith for analyzing this bug for us.

Cc: qemu-stable@nongnu.org
Reported-by: NKen Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 1d984a67 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.

Now configure adds -B only if it is accepted by the Python interpreter.

This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.

As VHDX depends on uuid.h, VHDX is now a configurable build option.  If
VHDX support is enabled, that will also enable uuid as well.  The
default is to have VHDX enabled.

To enable/disable VHDX:  --enable-vhdx, --disable-vhdx
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.

Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.

Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NFam Zheng <famz@redhat.com>

This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

In some cases when building with parallelism (make -jN),
build fails because the directory where output files are
supposed to be does not exist.  In particular, when make
decides to build virtfs-proxy-helper.1 before other files
in fsdev/, build will fail with the following error:

perl -Ww -- BUILDDIR/scripts/texi2pod.pl BUILDDIR/fsdev/virtfs-proxy-helper.texi fsdev/virtfs-proxy-helper.pod && pod2man --utf8 --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > fsdev/virtfs-proxy-helper.1
opening "fsdev/virtfs-proxy-helper.pod": No such file or directory
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.

Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

No longer used.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Similar to manually selecting i386 for an x86_64 host.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Currently, we are enforcing the _FORTIFY_SOURCE=2 without any
previous detection if the macro has been already defined, e.g.
by environment, or is just enabled by compiler by default.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJan Vesely <jano.vesely@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback.  Now we are
two releases further out, targeting the 1.7 release.  No major
issues with the new code poped up until now.  Time to remove it
from tre tree.  Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The 'gthread' coroutine backend was written before the freelist (aka
pool) existed in qemu-coroutine.c.

This means that every thread is expected to exit when its coroutine
terminates.  It is not possible to reuse threads from a pool.

This patch automatically disables the pool when 'gthread' is used.  This
allows the 'gthread' backend to work again (for example,
tests/test-coroutine completes successfully instead of hanging).

I considered implementing thread reuse but I don't want quirks like CPU
affinity differences due to coroutine threads being recycled.  The
'gthread' backend is a reference backend and it's therefore okay to skip
the pool optimization.

Note this patch also makes it easy to toggle the pool for benchmarking
purposes:

  ./configure --with-coroutine-backend=ucontext \
              --disable-coroutine-pool
Reported-by: NGabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NGabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This program can do a sendmsg call to transfer fd with unix
socket, which is not supported in python2.

The built binary will not be deleted in clean, but it is a
existing issue in ./tests, which should be solved in another
patch.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add the necessary code to configure to handle AArch64 as a target
CPU (we already have some code for supporting it as host). Note
that this doesn't enable the AArch64 targets yet.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-23-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-12-git-send-email-john.rigby@linaro.org
[PMM:
 * don't need to set TARGET_ABI_DIR to aarch64 as that is the default
 * don't build nwfpe -- this is 32 bit legacy only
 * rewrite commit message
 * add aarch64 to the list of "fdt required" targets
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.

"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.

To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.

"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.

These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.

In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>