Do some renaming to shorten some identifiers and to emphasize sclp.
Signed-off-by: NHeinz Graalfs <graalfs@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If the 51 most significant bits of the SCCB address are zero or equal to
the prefix, we should throw an specification exception, too.
Also moved the check for privileged mode to sclp_service_call() to have
all program checks in one place now.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The pointer to the SCCB should not be limited to 32 bits only.
In contrast to this, the command word parameter is only 32 bits
(the upper 32 bits should be ignored).
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As a followup to commit 5f04c14a
(s390-sclp: Define New SCLP Codes) we should mask the sclp command
not only in base sclp, but also in the event facility.

Based on an initial patch from Ralf Hoppe.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

So far, the DIAG 500 hypervisor call was only setting -EINVAL in
R2 when a guest tried to call this function with an illegal subcode.
This patch now changes the behavior so that a specification exception
is thrown instead, since this is the common behavior of other DIAG
functions (and other CPU instructions) when being called with illegal
parameters.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The handler for diag 500 did not check whether the requested function
was in the supported range, so illegal values could crash QEMU in the
worst case.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org

S390 can also use async page faults, to enhance guest scheduling.
In case of live migration we want to disable the feature and let
all pending request finish.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This is now obsolete - remove the header and all its inclusions.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Inline the only usage of each of xilinx_axiethernet_init and
xilinx_axidma_init. Converts this init to at least a semi-recent QOM
styling.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Inline the only usage. Converts this init to at least a semi-recent QOM
styling.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Inline these usages. Converts these init to at least a semi-recent QOM
styling.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Inline these usages. Converts these init to at least a semi-recent QOM
styling.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Define (missing) macros for the interrupt and memory maps for the sake
of self documentation.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Define macros for the interrupt and memory maps for the sake of self
documentation.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Define macros for the interrupt map for the sake of self documentation.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

The following registers control whether MAC can receive frames:
- MODER.RXEN bit that enables/disables receiver;
- TX_BD_NUM register that specifies number of RX descriptors.
Notify QEMU networking core when the MAC is ready to receive frames.
Discard frame and raise BUSY interrupt when the frame arrives but the
current RX descriptor is not empty.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_acct_done was called unconditional. But in case the ioreq has no
segments there is no matching bdrv_acct_start call. This could lead to
bogus accounting values.

Found by code inspection.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

All cpreg read and write functions now return 0, so we can clean up
their prototypes:
 * write functions return void
 * read functions return the value rather than taking a pointer
   to write the value to

This is a fairly mechanical change which makes only the bare
minimum set of changes to the callers of read and write functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

Commit 40d22500 accidentally changed the behaviour of
gic_acknowledge_irq() for the NVIC. The NVIC doesn't have SGIs,
so this meant we hit an assertion:
  gic_acknowledge_irq: Assertion `s->sgi_pending[irq][cpu] != 0' failed.

Return NVIC acknowledge-irq to its previous behaviour, like 11MPCore.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

So we don't spam stderr with (guest-triggerable) messages by default.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Allow the scheduled transfer time be a bit behind, to
compensate for latencies.  Without this xhci will wait
way to often for the mfindex wraparound, assuming the
scheduled time is in the future just because qemu is
a bit behind in processing the iso transfer requests.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Frameid specifies frames not microframes, so we
need to shift it to get the microframe index.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Found by Coverity.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replace magic constants in device bmAttributes with symbolic ones
from Linux kernel ch9.h
Signed-off-by: NPantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out.  Unnecessarily hard for
optimizers, static checkers, and human readers.  Dumb it down to
obvious.

Gets rid of several dozen Coverity false positives.

Note that the obvious form is already used in many places.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This was guarding against a full fifo rather than an empty fifo when
popping. Fix.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A lot of real world LEON3 systems are shipped with the GRMON boot
loader.  This boot loader initializes the stack pointer with the end of
RAM address.  The application can use this to detect the RAM size of a
particular board variant.
Signed-off-by: NSebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Use "drive", "chr", etc. only for legacy_name (which shows up
in -device foo,? output).
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Sure, CHS translation is an obscure topic, and legacy options for
hard-disk geometries are obscure as well.  But since QEMU does nothing
with it except telling the BIOS, and since there "large" and "rechs"
are listed in the enums, parsing them seems to be the bare minimum.
Acked-by: NStefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Replace them with uint8/32/64.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Their functionality is either aesthetic only (e.g. on/off vs. true/false)
or obtained by the "human mode" of StringOutputVisitor.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>