Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.

GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.

Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p.  It also has a test harness implementation that
this series will use.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:

mkdir build
cd build
../configure
make libcacard.la
make install-libcacard

Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.

If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).

New build artifacts:
 .libs subdirectories (at <buildroot> and <buildroot>/libcacard)
 *.lo files (at same locations as the respective o files)

Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
 any subdir: *.lo
 root and libcacard: libcacard.la, libcacard-instsall

Tested to link and load with all tracing backends.

Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We don't install mpc8544ds.dtb, which means that -M mpc8544ds doesn't
work when installed. Fix it by installing the file.
Signed-off-by: NAlexander Graf <agraf@suse.de>

No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:

mkdir build
cd build
../configure
make libcacard.la
make install-libcacard

Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.

If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).

New build artifacts:
 .libs subdirectories (at <buildroot> and <buildroot>/libcacard)
 *.lo files (at same locations as the respective o files)

Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
 any subdir: *.lo
 root and libcacard: libcacard.la, libcacard-instsall

Tested to link and load with all tracing backends.

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

And add missing ROMs to tarbin build target.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Signed-off-by: NBrad Hards <bradh@frogmouth.net>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: NAlon Levy <alevy@redhat.com>

---

changes from v24->v25:
 * Fix out of tree builds.
 * Fix build with linux-user targets.

changes from v23->v24: (Jes Sorensen review 2)
 * Makefile.target: use obj-$(CONFIG_*) +=
 * remove unrequired includes, include qemu-common before qemu-thread
  * required adding #define NO_NSPR_10_SUPPORT (harmless)

changes from v22->v23:
 * configure fixes: (reported by Stefan Hajnoczi)
  * test a = b, not a == b (second isn't portable)
  * quote $source_path in case it contains spaces
   - this doesn't really help since there are many other places
     that need similar fixes, not introduced by this patch.

changes from v21->v22:
 * fix configure to not link libcacard if nss not found
    (reported by Stefan Hajnoczi)
 * fix vscclient linkage with simpletrace backend
    (reported by Stefan Hajnoczi)
 * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
    (reported by William van de Velde)

changes from v20->v21: (Jes Sorensen review)
 * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
  and qemu_free), error_report
 * assert instead of ASSERT
 * cosmetic fixes
 * use strpbrk and isspace
 * add --disable-nss --enable-nss here, instead of in the final patch.
 * split vscclient, passthru and docs to following patches.

changes from v19->v20:
 * checkpatch.pl

changes from v15->v16:

Build:
 * don't erase self with distclean
 * fix make clean after make distclean
 * Makefile: make vscclient link quiet

Behavioral:
 * vcard_emul_nss: load coolkey in more situations
 * vscclient:
  * use hton,ntoh
  * send init on connect, only start vevent thread on response
  * read payload after header check, before type switch
  * remove Reconnect
  * update for vscard_common changes, empty Flush implementation

Style/Whitespace:
 * fix wrong variable usage
 * remove unused variable
 * use only C style comments
  * add copyright header
  * fix tabulation
Signed-off-by: NAlon Levy <alevy@redhat.com>

libcacard: fix out of tree builds

Currently, the emulated pSeries machine requires the use of the
-kernel parameter in order to explicitly load a guest kernel.  This
means booting from the virtual disk, cdrom or network is not possible.

This patch addresses this limitation by inserting a within-partition
firmware image (derived from the "SLOF" free Open Firmware project).
If -kernel is not specified, qemu will now load the SLOF image, which
has access to the qemu boot device list through the device tree, and
can boot from any of the usual virtual devices.

In order to support the new firmware, an extension to the emulated
machine/hypervisor is necessary.  Unlike Linux, which expects
multi-CPU entry to be handled kexec() style, the SLOF firmware expects
only one CPU to be active at entry, and to use a hypervisor RTAS
method to enable the other CPUs one by one.

This patch also implements this 'start-cpu' method, so that SLOF can
start the secondary CPUs and marshal them into the kexec() holding
pattern ready for entry into the guest OS.  Linux should, and in the
future might directly use the start-cpu method to enable initially
disabled CPUs, but for now it does require kexec() entry.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations.  On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege.  For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.

This patch implements such a hypercall based RTAS for our emulated pSeries
machine.  A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

Move build and user scripts into scripts directory.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Just compiled from vgabios git repo @ git.qemu.org,
copyed over and committed.  Also added to the list
of blobs in the Makefile.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Allow default configs to be split into several files.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Teach Makefile that cmd.o depends on a generated header (specifically
config-host.h).
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Patching the rom data during load (in qemu) now
also supports i82801 (which had no rom file).

We only need a single rom file for the whole device family,
so remove the second one which is no longer needed.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit b152aa84 broke the unit-tests
build, fix it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.

This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.

The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.

Example usage of a dtrace probe in systemtap looks like:

  probe process("qemu").mark("qemu_malloc") {
    printf("Malloc %d %p\n", $arg1, $arg2);
  }

* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
  trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 4addb112.

Commit b152aa84 broke the unit-tests
build, fix it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.

This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.

The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.

Example usage of a dtrace probe in systemtap looks like:

  probe process("qemu").mark("qemu_malloc") {
    printf("Malloc %d %p\n", $arg1, $arg2);
  }

* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
  trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

aliguori: update VGA BIOS
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

df2943ba broke out of tree build.

Fix breakage by adding $(SRC_PATH).
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This moves library functions used by both QEMU and the QEMU tools,
such as qemu-img, qemu-nbd etc. from osdep.c to oslib-{posix,win32}.c

In addition it introduces oslib-obj.y to the Makefile set to be
included by the various targets, instead of relying on these library
functions magically getting included via block-obj-y.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

All files include qemu-options.h which pulls in qemu-options.def from
the root directory.  Thus generating qemu-options.def from Makefile.objs
under the target directory is not effective.

Further, people expect .def file to get cleaned with make clean:
it does not have state so no reason to defer removing it
until distclean. Also add a rule to remove old files that might
be around.

This fixes the error: ‘QEMU_OPTION_spice’ undeclared
(first use in this function) error that some people reported
which is really down to an out of date .def file.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.

Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.

Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.

After this change, tracing can be used also for user code and
simpletrace on Win32.

Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

qemu_malloc instrumentations require linking against the trace objects.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.

Remove video.x MoL hacks.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

'make clean' did not remove trace.[ch]-timestamp files,
only trace.[ch]. But 'make' did not know how to make trace.[ch]
files if the timestamp files were present.

Fix by removing the timestamp files along with trace.[ch].
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add logic to detect changes in generated files. If the old
and new files are identical, don't touch the generated file.
This avoids a lot of churn since many files depend on trace.h.

Based on suggestion by Paolo Bonzini.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The logic of detecting changes in default-configs/*.mak is
flawed as can be demonstrated by 'touch default-configs/*.mak'
followed by make. This results in a message claiming that user
made changes to the */config-devices.mak files.

Fix by separating the detection of changes made by the user and
changes in the default-configs.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.

Please, note that this commit doesn't touch qemu-monitor.texi. All
texi files have the qemu- prefix and I don't think it's worth
changing that.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This file contains a copy of the following information from the
qemu-monitor.hx file:

    o QObject handlers entries
    o QMP documentation (all SQMP/EQMP sections)

Right now it's only used to generate the QMP docs in QMP/, but
next commits will turn this into QMP's command dispatch table.

It's important to note that QObject handlers entries are going
to get duplicated: they will exist in both QMP's and HMP's
dispatch tables.

This will be fixed in the near future, when we add a proper
QMP call interface and HMP is converted to use it. This way we
can completely drop QObject handlers entries from HMP's tables.

NOTE: HMP specific constructions, like "q|quit", have been dropped.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Add QEMU version information to the executables, based on earlier
work by C. W. Betts and Robert Riebisch.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

On a clean build, after generating trace.h, make would recurse into *-*-user
without a clue how to build ../trace.o (added to $(obj-y) in Makefile.target)
since its generation rule is in the main Makefile.
The softmmus are seemingly unaffected because the $(TOOLS), which each have
a dependency on $(trace-obj-y), are built first for the build-all target.

Add a dependency on $(trace-obj-y) for %-user, as done for the qemu-* tools.

Let's be paranoid and do the same for %-softmmu while at it, just in case
someone messes with $(TOOLS) or calls the Makefile target directly.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Acked-by: NStefan Weil <weil@mail.berlios.de>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Prerna Saxena <prerna@linux.vnet.ibm.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds a simple tracer which produces binary trace files.  To
try out the simple backend:

$ ./configure --trace-backend=simple
$ make

After running QEMU you can pretty-print the trace:

$ ./simpletrace.py trace-events trace.log

The output of simpletrace.py looks like this:

  qemu_realloc 0.699 ptr=0x24363f0 size=0x3 newptr=0x24363f0
  qemu_free 0.768 ptr=0x24363f0
  ^           ^---- timestamp delta (us)
  |____ trace event name
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

trace: Make trace record fields 64-bit

Explicitly use 64-bit fields in trace records so that timestamps and
magic numbers work for 32-bit host builds.

Includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com>.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This patch introduces the trace-events file where trace events can be
declared like so:

qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"

These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events.  Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).

The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.

The trace-events file serves two purposes:

1. Adding trace events is easy.  It is not necessary to understand the
   details of a backend tracing system.  The trace-events file is a
   single location where trace events can be declared without code
   duplication.

2. QEMU is not tightly coupled to one particular backend tracing system.
   In order to support tracing across QEMU host platforms and to
   anticipate new backend tracing systems that are currently maturing,
   it is important to be flexible and not tied to one system.

This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>