Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-7-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functional change. Cleanup only.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-6-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For now, it has no effect. It will be used in dump detach support.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-5-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Instead of malloc/free each time for DumpState, make it
static. Added DumpStatus to show status for dump.

This is to be used for detached dump.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-4-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch only adds the interfaces, but does not implement them.
"detach" parameter is made optional, to make sure that all the old
dump-guest-memory requests will still be able to work.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-3-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It might be a little bit confusing and error prone to do
dump_cleanup() in these two functions. A better way is to do
dump_cleanup() before dump finish, no matter whether dump has
succeeded or not.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-2-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

They seem to have snuck in when applying Janosch Frank
<frankja@linux.vnet.ibm.com>'s previous patch.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1455848416-13177-1-git-send-email-famz@redhat.com>
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Tested-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The current documentation of chardev mux=on is rather brief and opaque;
expand it to hopefully be a bit more helpful.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <1455643738-6068-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

target-arm queue:
 * implement or fix various EL3 trap behaviour for system registers
 * clean up the trap/undef handling of the SRS instruction
 * add some missing AArch64 performance monitor system registers
 * implement reset for the PL061 GPIO device
 * QOMify sd.c and the pxa2xx_mmci device
 * SD card emulation fixes for booting Tianocore UEFI on RPi2
 * QOMify various ARM timer devices

# gpg: Signature made Thu 18 Feb 2016 15:19:31 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160218-1: (36 commits)
  hw/timer: QOM'ify pxa2xx_timer
  hw/timer: QOM'ify pl031
  hw/timer: QOM'ify exynos4210_rtc
  hw/timer: QOM'ify exynos4210_pwm
  hw/timer: QOM'ify exynos4210_mct
  hw/timer: QOM'ify arm_timer (pass 2)
  hw/timer: QOM'ify arm_timer (pass 1)
  hw/sd: use guest error logging rather than fprintf to stderr
  hw/sd: model a power-up delay, as a workaround for an EDK2 bug
  hw/sd: implement CMD23 (SET_BLOCK_COUNT) for MMC compatibility
  hw/sd/pxa2xx_mmci: Add reset function
  hw/sd/pxa2xx_mmci: Convert to VMStateDescription
  hw/sd/pxa2xx_mmci: Update to use new SDBus APIs
  hw/sd/pxa2xx_mmci: convert to SysBusDevice object
  sdhci_sysbus: Create SD card device in users, not the device itself
  hw/sd/sdhci.c: Update to use SDBus APIs
  hw/sd: Add QOM bus which SD cards plug in to
  hw/sd/sd.c: Convert sd_reset() function into Device reset method
  hw/sd/sd.c: QOMify
  hw/sd/sdhci.c: Remove x-drive property
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* split the old SysBus init function into an instance_init
  and a Device realize function
* use DeviceClass::realize instead of SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign pl031_init to pl031_info.instance_init and drop the
SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign exynos4210_rtc_init to exynos4210_rtc_info.instance_init
and drop the SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign exynos4210_pwm_init to exynos4210_pwm_info.instance_init
and drop the SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign exynos4210_mct_init to exynos4210_mct_info.instance_init
and drop the SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign DeviceClass::vmsd instead of using vmstate_register function
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* assign icp_pit_init to icp_pit_info.instance_init
* split the old SysBus init function into an instance_init
  and a Device realize function
* use DeviceClass::realize instead of SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some of these errors may be harmless (e.g. probing unimplemented
commands, or issuing CMD12 in the wrong state), and may also be quite
frequent. Spamming the standard error output isn't desirable in such
cases.
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NAndrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454902521-21164-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The SD spec for ACMD41 says that a zero argument is an "inquiry"
ACMD41, which does not start initialisation and is used only for
retrieving the OCR. However, Tianocore EDK2 (UEFI) has a bug [1]: it
first sends an inquiry (zero) ACMD41. If that first request returns an
OCR value with the power up bit (0x80000000) set, it assumes the card
is ready and continues, leaving the card in the wrong state. (My
assumption is that this works on hardware, because no real card is
immediately powered up upon reset.)

This change models a delay of 0.5ms from the first ACMD41 to the power
being up. However, it also immediately sets the power on upon seeing a
non-zero (non-enquiry) ACMD41. This speeds up UEFI boot, it should
also account for guests that simply delay after card reset and then
issue an ACMD41 that they expect will succeed.

[1] https://github.com/tianocore/edk2/blob/master/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c#L279
(This is the loop starting with "We need to wait for the MMC or SD
card is ready")
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454902521-21164-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

CMD23 is optional for SD but required for MMC, and the UEFI bootloader
used for Windows on Raspberry Pi 2 issues it.
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NAndrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454902521-21164-2-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a reset function to the pxa2xx_mmci device; previously it had
no handling for system reset at all.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1455646193-13238-11-git-send-email-peter.maydell@linaro.org

Convert the pxa2xx_mmci device from manual save/load
functions to a VMStateDescription structure.

This is a migration compatibility break.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1455646193-13238-10-git-send-email-peter.maydell@linaro.org

Now the PXA2xx MMCI device is QOMified itself, we can
update it to use the SDBus APIs to talk to the SD card.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1455646193-13238-9-git-send-email-peter.maydell@linaro.org

Convert the pxa2xx_mmci device to be a sysbus device.

In this commit we only change the device itself, and leave
the interface to the SD card using the old non-SDBus APIs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1455646193-13238-8-git-send-email-peter.maydell@linaro.org

Move the creation of the SD card device from the sdhci_sysbus
device itself into the boards that create these devices.
This allows us to remove the cannot_instantiate_with_device_add
notation because we no longer call drive_get_next in the device
model.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-7-git-send-email-peter.maydell@linaro.org

Update the SDHCI code to use the new SDBus APIs.

This commit introduces the new command line options required
to connect a disk to sdhci-pci:

 -device sdhci-pci -drive id=mydrive,[...] -device sd,drive=mydrive
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-6-git-send-email-peter.maydell@linaro.org

Add a QOM bus for SD cards to plug in to.

Note that since sd_enable() is used only by one board and there
only as part of a broken implementation, we do not provide it in
the SDBus API (but instead add a warning comment about the old
function). Whoever converts OMAP and the nseries boards to QOM
will need to either implement the card switch properly or move
the enable hack into the OMAP MMC controller model.

In the SDBus API, the old-style use of sd_set_cb to register some
qemu_irqs for notification of card insertion and write-protect
toggling is replaced with methods in the SDBusClass which the
card calls on status changes and methods in the SDClass which
the controller can call to find out the current status. The
query methods will allow us to remove the abuse of the 'register
irqs' API by controllers in their reset methods to trigger
the card to tell them about the current status again.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-5-git-send-email-peter.maydell@linaro.org

Convert the sd_reset() function into a proper Device reset method.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1455646193-13238-4-git-send-email-peter.maydell@linaro.org

Turn the SD card into a QOM device.
This conversion only changes the device itself; the various
functions which are effectively methods on the device are not
touched at this point.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-3-git-send-email-peter.maydell@linaro.org

The following commits will remove support for the old sdhci-pci
command line syntax using the x-drive property:
 -device sdhci-pci,x-drive=mydrive -drive id=mydrive,[...]
and replace it with an explicit sd device:
 -device sdhci-pci -drive id=mydrive,[...] -device sd,drive=mydrive

(This is OK because x-drive is experimental.)

This commit removes the x-drive property so that old style
command lines will fail with a reasonable error message:
  -device sdhci-pci,x-drive=mydrive: Property '.x-drive' not found
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1455646193-13238-2-git-send-email-peter.maydell@linaro.org

This patch removes the float_high field of PL061State, which doesn't
seem to be used anywhere. Because this changes the device state, the
version ID is also bumped up for the reason of compatiblity.
Signed-off-by: NWei Huang <wei@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1455729552-28026-3-git-send-email-wei@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Current QEMU doesn't clear PL061 state after reset. This causes a
weird issue with guest reboot via GPIO. Here is the device state
with two reboot requests:

  (PL061State fields)           data   old_in_data   istate
VM boot                         0      0             0
After 1st ACPI reboot request   8      8             8
After VM PL061 driver ACK       8      8             0
After VM reboot                 8      8             0
------------------------------------------------------------
2nd ACPI reboot request         8

In the second reboot request above, because the old_in_data field is 8,
QEMU decides that there is a pending edge IRQ already (see
pl061_update()) in input; so it doesn't raise up IRQ again. As a result
the second reboot request is lost. The correct way is to clear PL061
device state after reset.

The default reset state is found from the documents listed below. Per
Peter's suggestion that QEMU automatically calls reset function after
device initialization, this patch removes calling pl061_reset() from
pl061_initfn().

Reference:
[1] PL061 Technical Reference Manual
[2] Stellaris LM3S8962 Microcontroller Data Sheet
[3] Stellaris LM3S5P31 Microcontroller Data Sheet
Signed-off-by: NWei Huang <wei@redhat.com>
Message-id: 1455729552-28026-2-git-send-email-wei@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Linux kernel accesses this register early in its setup.
Signed-off-by: NChristopher Covington <christopher.covington@linaro.org>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: b30d536cb16ec57b4412172bb6dbc3f00d293e7d.1455060548.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-by: NNathan Rossi <nathan@nathanrossi.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 50deeafb24958a5b6d7f594b5dda399a022c0e5b.1455060548.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-by: NNathan Rossi <nathan@nathanrossi.com>
Message-id: da0563119a9f56fd5fbdc26e7ed19a8a8457c5b9.1455060548.git.alistair.francis@xilinx.com
[PMM: Use 0 for PMCEID0 values for A15 and A57 since our PMU
 does not currently implement any events.]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make get_r13_banked() raise an exception at runtime for the
corner case of SRS from System mode, so that we can UNDEF it;
this brings us in to line with the ARM ARM's set of permitted
CONSTRAINED UNPREDICTABLE choices.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The user-mode versions of get/set_r13_banked() exist just to assert
if they're ever called -- the translate time code should never
emit calls to them because SRS from user mode always UNDEF.
There's no code in the softmmu versions that can't compile in
CONFIG_USER_ONLY, and the assertion is not particularly useful,
so combine the two functions rather than having completely split
versions under ifdefs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

Move bank_number()'s implementation into internals.h, so
it's available in the user-mode-only compile as well.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

Move get/set_r13_banked() from helper.c to op_helper.c. This will
let us add exception-raising code to them, and also puts them
in the same file as get/set_user_reg(), which makes some conceptual
sense.

(The original reason for the helper.c/op_helper.c split was that
only op_helper.c had access to the CPU env pointer; this distinction
has not been true for a long time, though, and so the split is
now rather arbitrary.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The SRS instruction is:
 * UNDEFINED in Hyp mode
 * UNPREDICTABLE in User or System mode
 * UNPREDICTABLE if the specified mode isn't accessible
 * trapped to EL3 if EL3 is AArch64 and we are at Secure EL1

Clean up the code to handle all these cases cleanly, including
picking UNDEF as our choice of UNPREDICTABLE behaviour rather
blindly trusting the mode field passed in the instruction.
As part of this, move the check for IS_USER into gen_srs()
itself rather than having it done by the caller.

The exception is that we don't UNDEF for calls from System
mode, which need a runtime check. This will be dealt with in
the following commits.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

If access to FPEXC32_EL2 is trapped by CPTR_EL2.TFP or CPTR_EL3.TFP,
this should be reported with a syndrome register indicating an
FP access trap, not one indicating a system register access trap.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>