This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.

[Jan: tiny style adjustments]
Signed-off-by: NKlaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

Right now, stop followed by an incoming migration will let the
virtual machine start.  cont before an incoming migration instead
will fail.

This is bad because the actual behavior is not predictable; it is
racy with respect to the start of the incoming migration.  That's
because incoming migration is blocking, and thus will delay the
processing of stop/cont until the end of the migration.

In addition, there's nothing that really prevents the user from
typing the block device's passwords before incoming migration is
done, so returning the DeviceEncrypted error is also helpful in
the QMP case.

Both things can be fixed by just toggling the autostart variable when
stop/cont are called in INMIGRATE state.

Note that libvirt is currently working around the race by looping
if the MigrationExpected answer is returned.  After this patch, the
command will return right away without ever raising an error.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Error management is important for mirroring; otherwise, an error on the
target (even something as "innocent" as ENOSPC) requires to start again
with a full copy.  Similar to on_read_error/on_write_error, two separate
knobs are provided for on_source_error (reads) and on_target_error (writes).
The default is 'report' for both.

The 'ignore' policy will leave the sector dirty, so that it will be
retried later.  Thus, it will not cause corruption.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This adds the monitor commands that start the mirroring job.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background.  This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program.  It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.

The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.

The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.

In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source.  (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).

It is not yet possible to complete the job and switch over to the target
disk.  The next patches will fix this and add many refinements to the
basic idea introduced here.  These include improved error management,
some tunable knobs and performance optimizations.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Even for jobs that need to be manually completed, management may want
to take care itself of the completion, not requiring the user to issue
a command to terminate the job.  In this case we want to avoid that
they poll us continuously, waiting for completion to become available.
Thus, add a new event that signals the phase switch and the availability
of the block-job-complete command.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.

Add a new block job command that manually completes background operations.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The first call to add an fd to an fd set was previously not
allowed to choose the fd set ID.  The ID was generated as
the first available and ensuing calls could add more fds by
specifying the fd set ID.  This change allows users to
choose the fd set ID on the first call.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Adding an NBD server inside QEMU is trivial, since all the logic is
in nbd.c and can be shared easily between qemu-nbd and QEMU itself.
The main difference is that qemu-nbd serves a single unnamed export,
while QEMU serves named exports.
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It indicates how many pages were dirtied during the last second.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>

This command is used during a migration of a guest under Xen. It calls
memory_global_dirty_log_start or memory_global_dirty_log_stop according to the
argument pass to the command.
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>

This patch adds support for error management to streaming.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The following behaviors are possible:

'report': The behavior is the same as in 1.1.  An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.

'ignore': An I/O error, respectively during a read or a write, will be
ignored.  For streaming, the job will complete with an error and the
backing file will be left in place.  For mirroring, the sector will be
marked again as dirty and re-examined later.

'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running.  This can only be
specified if the block device has rerror=stop and werror=stop or enospc.

'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.

In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.

It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests.  In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This will let block-stream reuse the enum.  Places that used the enums
are renamed accordingly.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add QMP commands matching the functionality.

Paused jobs cannot be canceled without first resuming them.  This
ensures that I/O errors are never missed by management.  However, an
optional force argument can be specified to allow that.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Job pausing reuses the existing support for cancellable sleeps.  A pause
happens at the next sleeping point and lasts until the coroutine is
re-entered explicitly.  Cancellation was already doing a forced resume,
so implement it explicitly in terms of resume.

Paused jobs cannot be canceled without first resuming them.  This ensures
that I/O errors are never missed by management.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Because pausing a job is asynchronous, we need to know whether it has
completed.  This is described by the "busy" field of BlockJob; copy it
to BlockJobInfo.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The command for live block commit is added, which has the following
arguments:

device: the block device to perform the commit on (mandatory)
base:   the base image to commit into; optional (if not specified,
        it is the underlying original image)
top:    the top image of the commit - all data from inside top down
        to base will be committed into base (mandatory for now; see
        note, below)

speed:  maximum speed, in bytes/sec

Note: Eventually this command will support merging down the active layer,
      but that code is not yet complete.  If the active layer is passed
      in as top, then an error will be returned.  Once merging down the
      active layer is supported, the 'top' argument may become optional,
      and default to the active layer.

The is done as a block job, so upon completion a BLOCK_JOB_COMPLETED will
be emitted.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Before the qapi conversion, the sendkey command could be used to
send key codes in hex directly to the guest. In HMP, this would
be like:

 (qemu) sendkey 0xdc

However, the qapi conversion broke this, as it only supports sending
QKeyCode values to the guest. That's a regression.

This commit fixes the problem by adding hex value support down
the QMP interface, qmp_send_key().

In more detail, this commit:

 1. Adds the KeyValue union. This can represent an hex value or
    a QKeyCode value

 2. *Changes* the QMP send-key command to take an KeyValue argument
    instead of a QKeyCode one

 3. Adapt hmp_send_key() to the QMP interface changes

Item 2 is an incompatible change, but as we're in development phase
(and this command has been merged a few weeks ago) this shouldn't be
a problem.

Finally, it's not possible to split this commit without breaking the
build.
Reported-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

 o Add a note about memory allocation with paging=true
 o Fix indentation
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Also fixes a few issues while there:

 1. The fd returned by monitor_get_fd() leaks in most error conditions
 2. monitor_get_fd() return value is not checked. Best case we get
    an error that is not correctly reported, worse case one of the
    functions using the fd (with value of -1) will explode
 3. A few error conditions aren't reported
 4. We now "use up" @fdname always.  Before, it was left alone for
    invalid @protocol
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>

Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Next commits will update devices to propagate errors.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Convert 'sendkey' to use QAPI.

QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().

For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().

'send-key' of QMP doesn't support key in hexadecimal format.
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

key_defs[] in monitor.c is a mapping table of keys and keycodes,
this patch added a QKeyCode enum. Key's index in the enmu is same
as keycode's index in key_defs[].
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The flag is 'true' when spice migration has completed on the src side.
It is needed for a case where libvirt dies before migration completes
and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED.
When libvirt is restored and queries the migration status, it also needs
to query spice and check if its migration has completed.
Signed-off-by: NYonit Halperin <yhalperi@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a 'query-target' QAPI command to allow management applications
to determine what target architecture a QEMU binary is emulating
without having to parse the binary name or -help output

  $ qmp-shell -p /tmp/qemu
  (QEMU) query-target
  {   u'return': {   u'arch': u'x86_64' }}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This patch adds support that enables passing of file descriptors
to the QEMU monitor where they will be stored in specified file
descriptor sets.

A file descriptor set can be used by a client like libvirt to
store file descriptors for the same file.  This allows the
client to open a file with different access modes (O_RDWR,
O_WRONLY, O_RDONLY) and add/remove the passed fds to/from an fd
set as needed.  This will allow QEMU to (in a later patch in this
series) "open" and "reopen" the same file by dup()ing the fd in
the fd set that corresponds to the file, where the fd has the
matching access mode flag that QEMU requests.

The new QMP commands are:
  add-fd: Add a file descriptor to an fd set
  remove-fd: Remove a file descriptor from an fd set
  query-fdsets: Return information describing all fd sets

Note: These commands are not compatible with the existing getfd
and closefd QMP commands.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This command attempts to map to the behavior of -cpu ?.  Unfortunately, the
output of this command differs wildly across targets.

To accommodate this, we use a weak symbol to implement a default version of the
command that fails with a QERR_NOT_SUPPORTED error code.  Targets can then
override and implement this command if it makes sense for them.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This provides the same output as -M ? but in a structured way.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We've had a cycle to tweak.  It is time to commit to supporting them.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This can be used in conjunction with qom-list-types to determine the supported
set of devices and their parameters.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

IMPORTANT: this BREAKS QMP's compatibility for the error response.

This commit changes QMP's wire protocol to make use of the simpler
error format introduced by previous commits.

There are two important (and mostly incompatible) changes:

 1. Almost all error classes have been replaced by GenericError. The
    only classes that are still supported for compatibility with
    libvirt are: CommandNotFound, DeviceNotActive, KVMMissingCap,
    DeviceNotFound and MigrationExpected

 2. The 'data' field of the error dictionary is gone

As an example, an error response like:

  { "error": { "class": "DeviceNotRemovable",
               "data": { "device": "virtio0" },
               "desc": "Device 'virtio0' is not removable" } }

Will now be emitted as:

  { "error": { "class": "GenericError",
               "desc": "Device 'virtio0' is not removable" } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>