Now the function returned errno, so it is better the new name.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

make functions propagate errno, instead of just using -EIO.  Add a
comment about what are the return value of qemu_savevm_state_iterate().
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We normally already have an errno value.  When not, abuse EIO.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

If migration is not active, just ignore writes.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Instead of having two has_error fields in QEMUFile & QEMUBufferedFile,
reuse the 1st one.  Notice that the one in buffered_file is only set
after a file operation.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

buffered_close 's' variable is of type QEMUFileBuffered, and
wait_for_unfreeze() expect to receive a MigrationState, that
'coincidentaly' is s->opaque.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Once there, add a comment about what each error mean.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Although migrate_fd_put_buffer() sets MIG_STATE_ERROR if it failed,
since migrate_fd_put_notify() isn't checking error of underlying
QEMUFile, those resources are kept open.  This patch checks it and
calls migrate_fd_error() in case of error.
Signed-off-by: NYoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Once there, make sure that if we already know that there is one error,
just call migration_fd_cleanup() with the ERROR state.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

QEMUFile * is only intended for migration nowadays.  Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit eb60260d.

Conflicts:

	savevm.c

We changed qemu_peek_byte() prototype, just fixed the rejects.

Signed-off-by: Juan Quintela<quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

We add qemu_peek_buffer, that is identical to qemu_get_buffer, just
that it don't update f->buf_index.

We add a paramenter to qemu_peek_byte() to be able to peek more than
one byte.

Once this is done, to see if we have a subsection we look:
- 1st byte is QEMU_VM_SUBSECTION
- 2nd byte is a length, and is bigger than section name
- 3rd element is a string that starts with section_name

So, we shouldn't have false positives (yes, content could still get us
wrong but probabilities are really low).

v2:
- Alex Williamsom found that we could get negative values on index.
- Rework code to fix that part.
- Rewrite qemu_get_buffer() using qemu_peek_buffer()

v3:
- return "done" on error case

v4:
- fix qemu_file_skip() off by one.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: Juan Quintela<quintela@redhat.com>

This patch will make moving code on next patches and having checkpatch
happy easier.

Signed-off-by: Juan Quintela<quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

We will need on next patch to be able to lookahead on next patch

v2: rename "used" to "pending" (Alex Williams)

Signed-off-by: Juan Quintela<quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

No target-specific bits remaining, let's move it over.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This allows to drop various stubs and move the i8359 into hwlib.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

No functional changes.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This key cleanup step requires to move the IRQ debugging bit from
i8259_set_irq directly to the per-PIC pic_set_irq, to pass the PIC
parameters (I/O base, ELCR address and mask, master/slave mode) as
qdev properties, and to interconnect the PICs with their environment via
GPIO pins.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Introduce a reference to the slave PIC for the few cases we need to
access it without a proper pointer at hand and drop PicState2. We could
even live without slave_pic if we had a better way of modeling the
cascade bus the PICs are attached to (in addition to the ISA bus).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This reflects how real PICs indentify their role (in non-buffered mode):
Pass the state of the /SP input on pic_init and use it instead of
pics_state to differentiate between master and slave mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There is nothing in the i8259 spec that justifies the special
pic_intack_read. At least the Linux PREP kernels configure the PICs
properly so that pic_read_irq returns identical values, and setting
read_reg_select in PIC0 cannot be derived from any special i8259 mode.

So switch ppc_prep to pic_read_irq and drop the now unused PIC code.

CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Drop redundant local address variable.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This was probably never used so far: According to the spec, polling
means ack'ing the pending IRQ and setting its corresponding bit in isr.
Moreover, we have to signal a pending IRQ via bit 7 of the returned
value, and we must not return a spurious IRQ if none is pending.

This implements the poll command without the help of pic_poll_read which
is left untouched as pic_intack_read is still using it.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This converts pic_update_irq to work against a single PIC instead of the
complete cascade. Along this change, the required update after
pic_set_irq1 is now moved into that function.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The ELCR is actually part of the chipset but we model it here for
simplicity reasons. The PIIX3 clears the ELCR on reset, which was once
broken by 4dbe19e1. Fix this by splitting up pic_init_reset from
pic_reset and clearing the register in the latter.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

MIPS and PPC users of the i8259 output signal expect us to report state
updates also after reset. As no consumer (including the master PIC) can
misinterpret the deassert as an activation event, it is safe to simply
update the IRQ state after reset.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

As we want to move the IRQ update to pic_intack, ordering matters: the
slave ack must be executed before the master ack to avoid missing
further pending slave IRQs.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If pic_poll_read finds no pending IRQ and return a spurious one instead,
no PIC state is changed, thus we do not need to call pic_update_irq.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

As a first step towards more generic master-slave support, remove
parent_irq in favor of a per-PIC output interrupt line. The slave's
line is attached to IRQ2 of the master, but it remains unused for now.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We are about to call the latter from the former. No functional changes.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The compiler is smarter in choosing the right optimization.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The master PIC is connected to the LINTIN0 of the APICs. As the APIC
currently does not track the state of that line, we have to ask the PIC
to reinject its IRQ after the CPU picked up an event from the APIC.

This introduces pic_get_output to read the master PIC IRQ line state
without changing it. The APIC uses this function to decide if a PIC IRQ
should be reinjected on apic_update_irq. This reflects better how the
real hardware works.

The patch fixes some failures of the kvm unit tests apic and eventinj by
allowing to enable the proper CPU IRQ deassertion when the guest masks
some pending IRQs at PIC level.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Will be required when we no longer let i8259_init allocate the PIC IRQs
but convert that chips to qdev.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The ISA bus IRQ range is 0..15. What isa_irq_handler and IsaIrqState are
actually dealing with are the Global System Interrupts. Refactor the
code to clarify this.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

IsaIrqState::ioapic is always non-NULL. Probably, the concrete
qemu_irq was supposed to be tested, but that's already done by
qemu_set_irq.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>