Change code handling mips16-specific branches to use ISA-neutral special
opcodes.  Since there are several places where the delay slot
requirements for microMIPS branches differ from mips16 branches, using
opcodes is easier than checking hflags, then checking mips16
vs. microMIPS.
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Move all knowledge about coprocessor-checking and register numbering
into the gen_cmp* helper functions.
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add FMT_* constants for the floating-point format field in opcodes and
tweak a few places to use them.  Add enums for various invocations of
FOP and tweak gen_farith and its lone caller accordingly.
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that tcg-opc.h is only used in TCG code, get rid of DEF2 in
tcg-opc.h.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

copy_size is a left-over from the dyngen era, remove it.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit dd4239d6 broke multiboot. It replaced the
instruction "rep insb (%dx), %es:(%edi)" by the binary output of
"addr32 rep insb (%dx), %es:(%di)".

Linuxboot calls the respective helper function in a code16 section. So the
original instruction was automatically translated to its "addr32" equivalent.
For multiboot, we're running in code32 so gcc didn't add the "addr32" which
breaks the instruction.

This patch splits that helper function in one which uses addr32 and one which
does not, so everyone's happy.

The good news is that nobody probably cared so far. The bundled multiboot.bin
binary was built before the change and is thus correct.

Please also put this patch into -stable.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Both tcg_target_init and tcg_target_qemu_prologue
are unused outside of tcg.c.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Mirror tcg_out_movi in having a TYPE parameter.  This allows x86_64
to perform the move at the proper width, which may elide a REX prefix.

Introduce a TCG_TYPE_REG enumerator to represent the "native width"
of the host register, and to distinguish the usage from "pointer data"
as represented by the existing TCG_TYPE_PTR.

Update all targets to match.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We forgot to propagate -fpie to the libdis-user directory.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>  
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

Add include directives to get WIFEXITED() and WEXITSTATUS() macros defined.

Fixes warnings:
  CC    migration-exec.o
/src/qemu/migration-exec.c: In function `exec_close':
/src/qemu/migration-exec.c:53: warning: implicit declaration of function `WIFEXITED'
/src/qemu/migration-exec.c:54: warning: implicit declaration of function `WEXITSTATUS'
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Negative four byte displacements need to be sign-extended after
c086b783.  Do so.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch makes sure that if the exec: process exits with a non-zero return
status, we treat the migration as failed.

This fixes https://bugs.launchpad.net/qemu/+bug/391879Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix a typo introduced by c28b14c6.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Declare tcg_out_tlb_load() inline so that we don't loose optimisations
with commit 8516a044.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Tidy some code by replacing ifdefs by C ifs.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Share some code between qemu_ld and qemu_st.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make fallthru be TLB hit and branch be TLB miss.  Doing this
both improves branch prediction and will allow further cleanup.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Splitting out these functions will allow further cleanups.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Include it in the opcode as an extension, as with P_EXT
or the REX bits in the x86-64 port.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

- truncate and sign or zero extend operands before multiplication
- factor out common code to gen_op_multiply() with parameter to sign/zero extend
- call gen_op_multiply from gen_op_umul and gen_op_smul
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- truncate second operand to 32bit
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- implemented block load/store primary/secondary with user privilege
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- use symbolic name for MMU index
v0->v1:
- change debug traces to DPRINTF_MMU
- fix debug trace function names
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- rearrange code to break from switch when appropriate
- allow deprecated ldfsr insn
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- change return type of ldl_* to uint32_t to prevent unwanted sign extension
  visible in sparc64 load alternate address space methods
- note this change makes ldl_* softmmu implementations match ldl_phys one
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- address masking for ldqf and stqf insns
- address masking for lddf and stdf insns
- address masking for translating ASI (Ultrasparc IIi)
v0->v1:
- move arch-specific code to helpers and drop more ifdefs at call sites
  using new helper asi_address_mask()
- change user emulation to use asi_address_mask()
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- set mmu tag access register on FAULT and PROT traps as well
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

vnc-encodings-*.c dependencies where missing.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While couting color, if the third color was only present one
time it wasn't added to the palette.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A simple patch would have been to just remove count -= 1, but this
one also replace the while (count--) with a for(i = 0; i < count; i++)
which I believe is more easy to understand.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.

While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

One of the most important missing feature in QMP today is its
supported commands documentation.

The plan is to make it part of self-description support, however
self-description is a big task we have been postponing for a
long time now and still don't know when it's going to be done.

In order not to compromise QMP adoption and make users' life easier,
this commit adds a simple text documentation which fully describes
all QMP supported commands.

This is not ideal for a number of reasons (harder to maintain,
text-only, etc) but does improve the current situation. To avoid at
least divering from the user monitor help and texi snippets, QMP bits
are also maintained inside qemu-monitor.hx, and hxtool is extended to
generate a single text file from them.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Push the doc fragments for the info command to the end of
qemu-monitor.hx. This helps to establish a proper layout in the upcoming
QMP documentation.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This make sure we send a desktop resize message only in case we actually
have to, using the new variables which track the clients desktop size.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>