This is only to convert the internal interface that is used for passing
the "filename" to be parsed, but converting to actual fine grained
options is left for another day, as it doesn't look trivial.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This is only to convert the internal interface that is used for passing
the "filename" to be parsed, but converting to actual fine grained
options is left for another day, as it doesn't look trivial.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

As a bonus, going through the QemuOpts QEMU_OPT_SIZE parser for the
readahead option gives us proper error reporting that the previous use
of atoi() lacked.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This allows using the file.filename option instead of the string that
comes from -drive file=... and is passed around as a separate parameter.
The goal is to get rid of this parameter and use the options QDict more
consistently.

With this option you can access not only the top-level image, but
specify a filename for the backing file (currently only if no backing
file exists, but we'll allow overriding it later)
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Options starting in "backing." are passed to the backing file now. If
you don't need to specify the filename for the backing file, you can add
it on the command line instead of in the image file:

$ qemu-nbd -t /tmp/test.img
$ qemu-img create -f qcow2 empty.qcow2 1G
$ qemu-system-x86_64 -drive file=empty.qcow2,backing.file.driver=nbd,\
    backing.file.host=localhost

Note that this doesn't override the backing filename from the image. If
the image has one, this will fail because NBD doesn't want the options
and a filename at the same time.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Specifying the wrong driver could fail an assertion:

$ qemu-system-x86_64 -drive file.driver=qcow2,file=x
qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file !=
((void *)0)' failed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

$QEMU_PROG happens to be 'qemu' in my setup, so this sed command
replaces a bit too much. Restrict it to the start of the line and to
when it's followed by a colon, i.e. the form used by error messages.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

bdrv_write_compressed() does not allow requests that span the end of the
device.  Therefore it is useless to zero-pad the last cluster and
thereby exceed the end of the device.

Let image formats handle zero-padding the final compressed cluster, if
necessary.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Compression in qcow requires image length to be a multiple of the
cluster size.  Lift this requirement by zero-padding the final cluster
when necessary.  The virtual disk size is still not cluster-aligned, so
the guest cannot access the zero sectors.

Note that this is almost identical to the qcow2 version of this code.
qcow2's compression code is drawn from qcow.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Compression in qcow2 requires image length to be a multiple of the
cluster size.  Lift this requirement by zero-padding the final cluster
when necessary.  The virtual disk size is still not cluster-aligned, so
the guest cannot access the zero sectors.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Fix failures to compile introduced by recent console commits
1dbfa005, 81c0d5a6) which removed is_graphic_console() and
vga_hw_update() without updating the cocoa UI backend to match.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixed EFLAGS corruption by ROR r8/r16 instruction located at the end of the TB.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
  hw/versatile_pci: Drop unnecessary vpb_pci_config_addr()
  versatile_pci: Expose PCI memory space to system
  arm/realview: Fix mapping of PCI regions
  versatile_pci: Implement the PCI controller's control registers
  versatile_pci: Implement the correct PCI IRQ mapping
  versatile_pci: Put the host bridge PCI device at slot 29
  versatile_pci: Use separate PCI I/O space rather than system I/O space
  versatile_pci: Change to subclassing TYPE_PCI_HOST_BRIDGE
  versatile_pci: Update to realize and instance init functions
  versatile_pci: Expose PCI I/O region on Versatile PB
  versatile_pci: Fix hardcoded tabs

* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Correctly restore FPSCR
  target-arm: Add some missing CPU state fields to VMState
  target-arm: port ARM CPU save/load to use VMState
  target-arm: Reinsert missing return statement in ARM mode SRS decode

* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
  linux-user: fix setgroups/getgroups for non-UID16 archs
  linux-user: fix undefined shift in copy_to_user_fdset
  linux-user: change do_semop to return target errno when unsuccessful

# By Stefan Weil (3) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  m25p80: Remove bogus include of devices.h
  ssh: Remove unnecessary use of strlen function.
  block/ssh: Add missing gcc format attributes
  linux-user: change do_semop to return target errno when unsuccessful
  w64: Fix compiler warnings (wrong format specifier)
  Remove unneeded type casts
  virtio.h: drop unused function prototypes
  bswap: fix compiler warning

Message-id: 1366371241-23430-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

pci: add pci test device

This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations.  FAST_MMIO will be added if/when
kvm supports it.  Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pci: add pci test device
  kvm: support non datamatch ioeventfd
  kvm: support any size for pio eventfd
  kvm: remove unused APIs

Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Jan Kiszka (4) and Marcelo Tosatti (1)
# Via Marcelo Tosatti
* qemu-kvm/uq/master:
  vmxcap: Update according to SDM of January 2013
  target-i386: kvm: save/restore steal time MSR
  vmxcap: Report APIC register emulation and RDTSCP control
  vmxcap: Augment reported information
  vmxcap: Open MSR file in unbuffered mode

Message-id: cover.1366253306.git.mtosatti@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use the helper functions to save and restore the FPSCR, so that
we correctly propagate rounding mode and flushing behaviour into
the float_status fields. This also allows us to stop saving the
vector length/stride fields separately.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

A number of CPU state fields were accidentally omitted from
our migration state: some OMAP specific cp15 registers, and 
some related to state for load/store exclusive insns. Add them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Port the ARM CPU save/load code to use VMState. Some state is
saved in a slightly different order to simplify things -- for
example arrays are saved one after the other rather than 'striped',
and we always save all 32 VFP registers even if the CPU happens
to only have 16.

Use one subsection for each feature.  This means that we don't need to
bump the version field each time that a new feature gets introduced.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
[PMM: fixed conflicts, updated to use cpu_class_set_vmsd(),  updated
 with new/removed fields since original patch, changed to use custom
 VMStateInfo for cpsr rather than presave/postload hooks, corrected
 subsection names so vmload doesn't fail]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since patch
   81465888
   target-arm: factor out handling of SRS instruction
the ARM mode SRS instruction has not worked in QEMU.

The problem is a missing return directive that was removed in the
refactoring, so after decoding the instruction, qemu would fall through
to generate an UNDEF exception for an illegal instruction.
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the vpb_pci_config_addr() function -- it is unnecessary since
the size of the memory regions means the hwaddr is always within
the 24 bit size. (This function was probably a leftover from when
read/write functions were called with absolute addresses rather
than relative ones.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

The VersatilePB's PCI controller exposes the PCI memory space to the
system via three regions controlled by the mapping control registers.
Implement this so that guests can actually use MMIO-BAR PCI cards.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Fix the mapping of the PCI regions for the realview board, which were
all incorrect. (This was never noticed because the Linux kernel
doesn't actually include a PCI driver for the realview boards.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

The versatile_pci PCI controller has a set of control registers which
handle the mapping between PCI and system address spaces. Implement
these registers (though for now they have no effect since we don't
implement mapping PCI space into system memory at all).

The most natural order for our sysbus regions has the control
registers at the start, so move all the others down one.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Implement the correct IRQ mapping for the Versatile PCI controller; it
differs between realview and versatile boards, but the previous QEMU
implementation was correct only for the first PCI card on a versatile
board, since we weren't swizzling IRQs based on the slot number.

Since this change would otherwise break any uses of PCI on Linux kernels
which have an equivalent bug (since they have effectively only been
tested against QEMU, not real hardware), we implement a mechanism
for automatically detecting those broken kernels and switching back
to the old mapping. This works by looking at the values the kernel
writes to the PCI_INTERRUPT_LINE register in the config space, which
is effectively the interrupt number the kernel expects the device
to be using.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On real hardware the host bridge appears as a PCI device in slot 29,
so make QEMU put its host bridge in that slot too.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Rather than overloading the system I/O space (which doesn't even make
any sense on ARM) for PCI I/O, create an memory region in the PCI
controller and use that to represent the I/O space.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Change versatile_pci to subclass TYPE_PCI_HOST_BRIDGE and generally
handle PCI in a more QOM-like fashion.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Update the Versatile PCI controller to use a realize function rather
than SysBusDevice::init. To reflect the fact that the 'realview_pci'
class is taking most of its implementation from 'versatile_pci' (and
to make the QOM casts work) we make 'realview_pci' a subclass of
'versatile_pci'.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Comments in the QEMU source code claim that the version of the PCI
controller on the VersatilePB board doesn't support the PCI I/O
region, but this is incorrect; expose that region, map it in the
correct location, and drop the misleading comments.

This change removes the only currently implemented difference
between the realview-pci and versatile-pci models; however there
are other differences in not-yet-implemented functionality, so we
retain the distinction between the two device types.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

There is just one line in this source file with a hardcoded tab
indent, so just fix it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

I think in the early revisions of this we had an instantiation helper
for the device in devices.h. This was later removed and this header was
left over. Removed
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>