- 10 2月, 2014 10 次提交
-
-
由 Igor Mammedov 提交于
make qdev_unplug()/device_set_realized() to call hotplug handler's plug/unplug methods if available and remove not needed anymore hot(un)plug handling from PCIDevice. In case if hotplug handler is not available, revert to the legacy hotplug method for compatibility with not yet converted buses. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCIE_SLOT device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split shpc_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCI_BRIDGE_DEV device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
do so to avoid not necessary forward declarations and place typeinfo registration at the file end where it's usually expected. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Currently it's possible to make PCIDevice not hotpluggable by using no_hotplug field of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code. So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation. Following patches will replace PCIDeviceClass.no_hotplug with this new property. In addition expose field as "hotpluggable" readonly property, to make it possible to read its value via QOM interface. Make DeviceClass hotpluggable by default as it was assumed before. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
It will allow to reuse field with different BUSes, reducing code duplication. Field is intended for replacing 'hotplug_qdev' field in PCIBus and also will allow to avoid adding equivalent field to DimmBus with possiblitity to refactor other BUSes to use it instead of custom field. In addition once all users of allow_hotplug field are converted to new API, link could replace allow_hotplug field in qdev hotplug code. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Provide a generic hotplug interface for hotplug handlers. Intended for replacing hotplug mechanism used by PCI/PCIE/SHPC code and will be used for memory hotplug. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
Document that get_image_size sets errno on failure. Suggested-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 05 2月, 2014 11 次提交
-
-
由 Michael S. Tsirkin 提交于
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
xenfv has no fwcfg and so does not load acpi from QEMU. as such new acpi features don't work. Reported-by: NSander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
qtest driver always uses signals to kill qemu no need to report it, whatever the accelerator state. Add API to detect qtest driver, and suppress reporting signals in this case. Reported-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
reduces acpi PCI hotplug code duplication by ~200LOC Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Remove now unused 'device_present' field wich was obsoleted by patch "pcihp: reduce number of device check events" Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
due to recent change introduced by: "pcihp: reduce number of device check events" 'up' field is cleared right after it's read. This is incompatible with legacy BIOS ACPI code where PCNF ACPI method reads this field 32 times. To make pci_read mmio callback compatible with legacy 'up' behavior, pcihp code will need to know in which mode it runs add 'legacy_piix' field to AcpiPciHpState structure and alter register behavior accordingly. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
... removes dependency of mmio handler on PCI_HOTPLUG_ADDR. It will be needed in case of Q35 where base could be different. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
enable_device() and disable_device() functions aren't reused anywere, so replace them with respective oneliners at call sites. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
PIIX created a made-up value for the UP register since it was read by guest 32 times for each interrupt. There's no reason to do this for the new PCIHP: register is only read once for each interrupt, so clean up code by making read act as an interrupt acknowledgement: the new UP register clear on read. In this way we cut down the number of bus rescans by a factor of 32, and drop a bunch of code that's now unused. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Peter Maydell 提交于
This patch set contains the sclp defines and events for cpu hotplug, the initial sclp defines (without code yet) for standby memory (some sort of memory hotplug) as well as a cleanup of the kvm register synchronization. # gpg: Signature made Fri 31 Jan 2014 08:54:29 GMT using RSA key ID B5A61C7C # gpg: Can't check signature: public key not found * remotes/borntraeger/tags/kvm-s390-20140131: s390x/kvm: cleanup partial register handling sclp-s390: Define new SCLP codes and structures s390-sclp: SCLP Event integration s390-sclp: SCLP CPU Info s390-sclp: Define New SCLP Codes Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/mcayland/qemu-openbios: Update OpenBIOS images Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 03 2月, 2014 6 次提交
-
-
由 Stefan Weil 提交于
__put_user can write bytes, words (2 bytes) or longwords (4 bytes). Here obviously words should have been written, but bytes were written, so values like 0x9c5f were truncated to 0x5f. Fix this by changing retcode from uint8_t to to uint16_t in target_signal_frame and also in the unused rt_signal_frame. This problem was reported by static code analysis (smatch). Cc: qemu-stable@nongnu.org Signed-off-by: NStefan Weil <sw@weilnetz.de> Acked-by: NRiku Voipio <riku.voipio@linaro.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
This is an internal error as the CRISv10 should mask interrupts while executing delay slots. Bail out sooner rather than later. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
- 02 2月, 2014 4 次提交
-
-
由 Peter Maydell 提交于
* qmp-unstable/queue/qmp: monitor: Cleanup mon->outbuf on write error virtio_rng: replace custom backend API with UserCreatable.complete() callback add optional 2nd stage initialization to -object/object-add commands vl.c: -object: don't ignore duplicate 'id' object_add: consolidate error handling Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
target-arm queue: * implementation of first part of the A64 Neon instruction set * v8 AArch32 rounding and 16<->64 fp conversion instructions * fix MIDR value on Zynq boards * some minor bugfixes/code cleanups # gpg: Signature made Fri 31 Jan 2014 15:06:34 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * pmaydell/tags/pull-target-arm-20140131: (34 commits) arm_gic: Fix GICD_ICPENDR and GICD_ISPENDR writes arm_gic: Introduce define for GIC_NR_SGIS target-arm: A64: Add SIMD shift by immediate target-arm: A64: Add simple SIMD 3-same floating point ops target-arm: A64: Add integer ops from SIMD 3-same group target-arm: A64: Add logic ops from SIMD 3 same group target-arm: A64: Add top level decode for SIMD 3-same group target-arm: A64: Add SIMD scalar 3 same add, sub and compare ops target-arm: A64: Add SIMD three-different ABDL instructions target-arm: A64: Add SIMD three-different multiply accumulate insns target-arm: Add AArch32 SIMD VCVTA, VCVTN, VCVTP and VCVTM target-arm: Add AArch32 FP VCVTA, VCVTN, VCVTP and VCVTM target-arm: Add AArch32 SIMD VRINTA, VRINTN, VRINTP, VRINTM, VRINTZ target-arm: Add set_neon_rmode helper target-arm: Add support for AArch32 SIMD VRINTX target-arm: Add support for AArch32 FP VRINTX target-arm: Add support for AArch32 FP VRINTZ target-arm: Add support for AArch32 FP VRINTR target-arm: Add AArch32 FP VRINTA, VRINTN, VRINTP and VRINTM target-arm: Move arm_rmode_to_sf to a shared location. ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
vfio-pci updates include: - Destroy MemoryRegions on device teardown - Print warnings around PCI option ROM failures - Skip bogus mappings from 64bit BAR sizing - Act on DMA mapping failures - Fix alignment to avoid MSI-X table mapping - Fix debug macro typo # gpg: Signature made Tue 28 Jan 2014 15:27:47 GMT using RSA key ID 3BB08B22 # gpg: Can't check signature: public key not found * remotes/awilliam/tags/vfio-pci-for-qemu-20140128.0: vfio: correct debug macro typo vfio: fix mapping of MSIX bar kvm: initialize qemu_host_page_size vfio-pci: Fail initfn on DMA mapping errors vfio: Filter out bogus mappings vfio: Do not reattempt a failed rom read vfio: warn if host device rom can't be read vfio: Destroy memory regions Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/sstabellini/xen-140130: address_space_translate: do not cross page boundaries Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 31 1月, 2014 9 次提交
-
-
由 Christoffer Dall 提交于
Fix two bugs that would allow changing the state of SGIs through the ICPENDR and ISPENDRs. Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Christoffer Dall 提交于
Instead of hardcoding 16 various places in the code, use a define to make it more clear what is going on. Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alex Bennée 提交于
This implements a subset of the AdvSIMD shift operations (namely all the none saturating or narrowing ones). The actual shift generation code itself is common for both the scalar and vector cases but wrapped with either vector element iteration or the fp reg access. The rounding operations need to take special care to correctly reflect the result of adding rounding bits on high bits as the intermediates do not truncate. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Implement a simple subset of the SIMD 3-same floating point operations. This includes a common helper function used for both scalar and vector ops; FABD is the only currently implemented shared op. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
由 Peter Maydell 提交于
Add some of the integer operations in the SIMD 3-same group: specifically, the comparisons, addition and subtraction. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
由 Peter Maydell 提交于
Add support for the logical operations (ORR, AND, BIC, ORN, EOR, BSL, BIT and BIF) from the SIMD 3 register same group (C3.6.16). Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
由 Peter Maydell 提交于
Add top level decode for the A64 SIMD three regs same group (C3.6.16), splitting it into the pairwise, logical, float and integer subgroups. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
由 Peter Maydell 提交于
Implement the add, sub and compare ops from the SIMD "scalar three same" group. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
由 Peter Maydell 提交于
Implement the absolute-difference instructions in the SIMD three-different group: SABAL, SABAL2, UABAL, UABAL2, SABDL, SABDL2, UABDL, UABDL2. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-