- 02 6月, 2017 13 次提交
-
-
由 Juan Quintela 提交于
Start removing migration code from sysemu/sysemu.h. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Just for the functions exported from tls.c. Notice that we can't remove the migration/migration.h include from tls.c because it access directly MigrationState for the tls params. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Split the file into public and internal interfaces. I have to rename the external one because we can't have two include files with the same name in the same directory. Build system gets confused. The only exported functions are the ones that handle basic types. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Peter Xu 提交于
We were do the shutting off only for postcopy. Now we do this as long as the source return path is there. Moving the cleanup of from_src_file there too. Signed-off-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Peter Xu 提交于
The return path channel is possibly leaked. Fix it. Signed-off-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Everything else assumes that we always load a device from its own savevm handler. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NLaurent Vivier <lvivier@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
So we remove all traces of them. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NLaurent Vivier <lvivier@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
There is no reason for having the loadvm_handlers at all. There is only one use, and we can use the savevm handlers. We will remove the loadvm handlers on a following patch. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NLaurent Vivier <lvivier@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> -- - Added load_version_id: version_id read from the stream (laurent) - Added load_section_id: section_id read from the stream (dave)
-
- 01 6月, 2017 5 次提交
-
-
由 Peter Maydell 提交于
Misc linux-user updates # gpg: Signature made Wed 31 May 2017 12:33:17 BST # gpg: using RSA key 0xB44890DEDE3C9BC0 # gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>" # gpg: aka "Riku Voipio <riku.voipio@linaro.org>" # Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0 * remotes/riku/tags/pull-linux-user-20170531: linux-user: add strace support for uinfo structure of rt_sigqueueinfo() and rt_tgsigqueueinfo() linux-user: fix inconsistent spaces in print_siginfo() output linux-user: add rt_tgsigqueueinfo() strace linux-user: add support for rt_tgsigqueueinfo() system call linux-user: fix argument type declaration of rt_sigqueinfo() syscall linux-user: fix mismatch of lock/unlock_user() invocations in rt_sigqueinfo() syscall linux-user: fix ssetmask() system call linux-user: add tkill(), tgkill() and rt_sigqueueinfo() strace linux-user: add strace for getuid(), gettid(), getppid(), geteuid() linux-user: remove all traces of qemu from /proc/self/cmdline linux-user: allocate heap memory for execve arguments linux-user: fix inotify linux-user: fix fadvise64_64() on ppc linux-user: fix eventfd linux-user: call fd_trans_target_to_host_data() for write() Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
migration/next for 20170531 # gpg: Signature made Wed 31 May 2017 08:53:06 BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20170531: migration: use dirty_rate_high_cnt more aggressively migration: set bytes_xfer_* outside of autoconverge logic migration: set dirty_pages_rate before autoconverge logic migration: keep bytes_xfer_prev init'd to zero migration: Create savevm.h for functions exported from savevm.c Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Queued target/sh4 patches # gpg: Signature made Tue 30 May 2017 20:12:10 BST # gpg: using RSA key 0xBA9C78061DDD8C9B # gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>" # gpg: aka "Aurelien Jarno <aurelien@jarno.fr>" # gpg: aka "Aurelien Jarno <aurel32@debian.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 7746 2642 A9EF 94FD 0F77 196D BA9C 7806 1DDD 8C9B * remotes/aurel/tags/pull-target-sh4-20170530: target/sh4: fix RTE instruction delay slot target/sh4: ignore interrupts in a delay slot target/sh4: introduce DELAY_SLOT_MASK target/sh4: fix reset when using a kernel and an initrd target/sh4: log unauthorized accesses using qemu_log_mask Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Various bugfixes and code cleanups. Most notably, it fixes metadata handling in mapped-file security mode (especially for the virtfs root). # gpg: Signature made Tue 30 May 2017 14:36:22 BST # gpg: using DSA key 0x02FC3AEB0101DBC2 # gpg: Good signature from "Greg Kurz <groug@kaod.org>" # gpg: aka "Greg Kurz <groug@free.fr>" # gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>" # gpg: aka "Gregory Kurz (Groug) <groug@free.fr>" # gpg: aka "[jpeg image of size 3330]" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2 * remotes/gkurz/tags/for-upstream: 9pfs: local: metadata file for the VirtFS root 9pfs: local: simplify file opening 9pfs: local: resolve special directories in paths 9pfs: check return value of v9fs_co_name_to_path() util: drop old utimensat() compat code 9pfs: assume utimensat() and futimens() are present fsdev: fix virtfs-proxy-helper cwd 9pfs: local: fix unlink of alien files in mapped-file mode 9pfs: drop pdu_push_and_notify() fsdev: don't allow unknown format in marshal/unmarshal virtio-9p/xen-9p: move 9p specific bits to core 9p code Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
NUMA fixes, 2017-05-30 # gpg: Signature made Tue 30 May 2017 20:10:44 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/numa-pull-request: numa: Fix format string for "Invalid node" message numa-test: fix query-cpus leaks Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 31 5月, 2017 12 次提交
-
-
由 Felipe Franciosi 提交于
The commit message from 070afca2 suggests that dirty_rate_high_cnt should be used more aggressively to start throttling after two iterations instead of four. The code, however, only changes the auto convergence behaviour to throttle after three iterations. This makes the behaviour more aggressive by kicking off throttling after two iterations as originally intended. Signed-off-by: NFelipe Franciosi <felipe@nutanix.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Felipe Franciosi 提交于
The bytes_xfer_now/prev counters are only used by the auto convergence logic. However, they are used alongside the dirty_pages_rate counter, which is calculated (and required) outside of this logic. The problem with this approach is that if the auto convergence capability is changed while a migration is ongoing, the relationship of the counters will be broken. This moves the management of bytes_xfer_now/prev counters outside of the auto convergence logic to address this issue. Signed-off-by: NFelipe Franciosi <felipe@nutanix.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Felipe Franciosi 提交于
Currently, a "period" in the RAM migration logic is at least a second long and accounts for what happened since the last period (or the beginning of the migration). The dirty_pages_rate counter is calculated at the end this logic. If the auto convergence capability is enabled from the start of the migration, it won't be able to use this counter the first time around. This calculates dirty_pages_rate as soon as a period is deemed over, which allows for it to be used immediately. Signed-off-by: NFelipe Franciosi <felipe@nutanix.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Felipe Franciosi 提交于
The first time migration_bitmap_sync() is called, bytes_xfer_prev is set to ram_state.bytes_transferred which is, at this point, zero. The next time migration_bitmap_sync() is called, an iteration has happened and bytes_xfer_prev is set to 'x' bytes. Most likely, more than one second has passed, so the auto converge logic will be triggered and bytes_xfer_now will also be set to 'x' bytes. This condition is currently masked by dirty_rate_high_cnt, which will wait for a few iterations before throttling. It would otherwise always assume zero bytes have been copied and therefore throttle the guest (possibly) prematurely. Given bytes_xfer_prev is only used by the auto convergence logic, it makes sense to only set its value after a check has been made against bytes_xfer_now. Signed-off-by: NFelipe Franciosi <felipe@nutanix.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This removes last trace of migration functions from sysemu/sysemu.h. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
-
由 Eduardo Habkost 提交于
Some compilers complain about the PRIu16 format string with the MAX(src, dst) and MAX_NODES arguments. Example output from Apple LLVM version 7.3.0 (clang-703.0.31): numa.c:236:20: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat] MAX(src, dst), MAX_NODES); ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~ include/qapi/error.h:163:35: note: expanded from macro 'error_setg' (fmt), ## __VA_ARGS__) ^~~~~~~~~~~ glib/2.52.2/include/glib-2.0/glib/gmacros.h:288:20: note: expanded from macro 'MAX' #define MAX(a, b) (((a) > (b)) ? (a) : (b)) ^~~~~~~~~~~~~~~~~~~~~~~~~ numa.c:236:35: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat] MAX(src, dst), MAX_NODES); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~ include/qapi/error.h:163:35: note: expanded from macro 'error_setg' (fmt), ## __VA_ARGS__) ^~~~~~~~~~~ include/sysemu/sysemu.h:165:19: note: expanded from macro 'MAX_NODES' #define MAX_NODES 128 ^~~ MAX(src, dst) promotes the src and dst arguments to int, and MAX_NODES is an int. Use %d to silence those warnings. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170530184013.31044-1-ehabkost@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Marc-André Lureau 提交于
Fix test leaks introduced in commit 2941020a. (and small extra space removed) Spotted by ASAN. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170526110456.32004-1-marcandre.lureau@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Aurelien Jarno 提交于
The ReTurn from Exception (RTE) instruction loads the system register (SR) with the saved system register (SSR). It has a delay slot, and behaves specially according to the SH4 manual: The SR value accessed by the instruction in the RTE delay slot is the value restored from SSR by the RTE instruction. The SR and MD values defined prior to RTE execution are used to fetch the instruction in the RTE delay slot. The instruction in the delay slot being often a NOP, it doesn't cause any issue most of the time except in some rare cases where the NOP is being splitted in a different TB (for example when the TCG op buffer is full). In that case the NOP is fetched with the user permissions and causes an instruction TLB protection violation exception. This patches fixes that by introducing a new delay slot flag for the RTE instruction. Given it's a privileged instruction, the RTE delay slot instruction is always fetched in privileged mode. It is therefore enough to to check for this flag in cpu_mmu_index. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Delay slots are indivisible, therefore avoid scheduling an interrupt in the delay slot. However exceptions are possible. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
This will make easier the introduction of a new flag in the next patches. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
When a masked exception happens, the SH4 CPU generates a non-masked reset exception, which then jumps to the reset vector at address 0xA0000000. While this is emulated correctly in QEMU, this does not work when using a kernel and initrd as this address then contain an illegal instruction (and there is no guarantee the kernel and initrd haven't been overwritten). Therefore call qemu_system_reset_request to reload the kernel and initrd and load the program counter to the kernel entry point. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
qemu_log_mask() is preferred over fprintf() for logging errors. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 30 5月, 2017 8 次提交
-
-
由 Stefan Hajnoczi 提交于
Block layer patches # gpg: Signature made Mon 29 May 2017 03:34:59 PM BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * kwolf/tags/for-upstream: block/file-*: *_parse_filename() and colons block: Fix backing paths for filenames with colons block: Tweak error message related to qemu-img amend qemu-img: Fix leakage of options on error qemu-img: copy *key-secret opts when opening newly created files qemu-img: introduce --target-image-opts for 'convert' command qemu-img: fix --image-opts usage with dd command qemu-img: add support for --object with 'dd' command qemu-img: Fix documentation of convert qcow2: remove extra local_error variable mirror: Drop permissions on s->target on completion nvme: Add support for Controller Memory Buffers iotests: 147: Don't test inet6 if not available qemu-iotests: Test streaming with missing job ID stream: fix crash in stream_start() when block_job_create() fails Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
usb: depricate legacy options and hmp commands usb: fixes for ehci and hub, split xhci variants # gpg: Signature made Mon 29 May 2017 02:07:17 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-usb-20170529-1: ehci: fix frame timer invocation. usb: don't wakeup during coldplug usb-hub: set PORT_STAT_C_SUSPEND on host-initiated wake-up xhci: add CONFIG_USB_XHCI_NEC option xhci: split into multiple files usb: Simplify the parameter parsing of the legacy usb serial device usb: Deprecate HMP commands usb_add and usb_del usb: Deprecate the legacy -usbdevice option ehci: fix overflow in frame timer code Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
pci, virtio, vhost: fixes A bunch of fixes all over the place. Most notably this fixes the new MTU feature when using vhost. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 29 May 2017 01:10:24 AM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: acpi-test: update expected files pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry vhost-user: pass message as a pointer to process_message_reply() virtio_net: Bypass backends for MTU feature negotiation intel_iommu: turn off pt before 2.9 intel_iommu: support passthrough (PT) intel_iommu: allow dev-iotlb context entry conditionally intel_iommu: use IOMMU_ACCESS_FLAG() intel_iommu: provide vtd_ce_get_type() intel_iommu: renaming context entry helpers x86-iommu: use DeviceClass properties memory: remove the last param in memory_region_iommu_replay() memory: tune last param of iommu_ops.translate() Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
slirp updates # gpg: Signature made Sat 27 May 2017 10:36:33 PM BST # gpg: using RSA key 0xB0A51BF58C9179C5 # gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: AEBF 7448 FAB9 453A 4552 390E B0A5 1BF5 8C91 79C5 * sthibault/tags/samuel-thibault: Fix total IP header length in forwarded TCP packets slirp: fix leak slirp: Fix wrong mss bug. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
# gpg: Signature made Fri 26 May 2017 08:22:27 PM BST # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * jtc/tags/block-pull-request: block/gluster: glfs_lseek() workaround blockjob: use deferred_to_main_loop to indicate the coroutine has ended blockjob: reorganize block_job_completed_txn_abort blockjob: strengthen a bit test-blockjob-txn blockjob: group BlockJob transaction functions together blockjob: introduce block_job_cancel_async, check iostatus invariants blockjob: move iostatus reset inside block_job_user_resume blockjob: separate monitor and blockjob APIs blockjob: introduce block_job_pause/resume_all blockjob: introduce block_job_early_fail blockjob: remove iostatus_reset callback blockjob: remove unnecessary check Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
ppc patch queue 2017-05-25 Assorted accumulated patches. These are nearly all bugfixes at one level or another - some for longstanding problems, others for some regressions caused by more recent cleanups. This includes preliminary patches towards fixing migration for Radix Page Table guests under POWER9 and also fixing some migration regressions due to the re-organization of the interrupt controller code. Not all the pieces are there yet, so those still won't quite work, but the preliminary changes make sense on their own. # gpg: Signature made Thu 25 May 2017 04:50:00 AM BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * dgibson/tags/ppc-for-2.10-20170525: xics: add unrealize handler hw/ppc/spapr.c: recover pending LMB unplug info in spapr_lmb_release hw/ppc: migrating the DRC state of hotplugged devices hw/ppc: removing drc->detach_cb and drc->detach_cb_opaque hw/ppc/spapr.c: adding pending_dimm_unplugs to sPAPRMachineState spapr: add pre_plug function for memory pseries: Restore support for total vcpus not a multiple of threads-per-core for old machine types pseries: Split CAS PVR negotiation out into a separate function spapr: fix error reporting in xics_system_init() spapr_cpu_core: drop reference on ICP object during CPU realization hw/ppc/spapr_events.c: removing 'exception' from sPAPREventLogEntry spapr: ensure core_slot isn't NULL in spapr_core_unplug() xics_kvm: cache already enabled vCPU ids spapr: Consolidate HPT freeing code into a routine spapr-cpu-core: release ICP object when realization fails spapr: sanitize error handling in spapr_ics_create() ppc/xics: simplify prototype of xics_spapr_init() target/ppc: reset reservation in do_rfi() Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
QAPI patches for 2017-05-23 # gpg: Signature made Tue 23 May 2017 12:33:32 PM BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * armbru/tags/pull-qapi-2017-05-23: qapi-schema: Remove obsolete note from ObjectTypeInfo block: Use QDict helpers for --force-share shutdown: Expose bool cause in SHUTDOWN and RESET events shutdown: Add source information to SHUTDOWN and RESET shutdown: Preserve shutdown cause through replay shutdown: Prepare for use of an enum in reset/shutdown_request shutdown: Simplify shutdown_signal sockets: Plug memory leak in socket_address_flatten() scripts/qmp/qom-set: fix the value argument passed to srv.command() Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
Silence "make check" warnings on NUMA test # gpg: Signature made Tue 23 May 2017 11:44:24 AM BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * ehabkost/tags/numa-pull-request: numa: Silence incomplete mapping warning under qtest Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 29 5月, 2017 2 次提交
-
-
由 Kevin Wolf 提交于
Block patches for the block queue # gpg: Signature made Mon May 29 16:32:16 2017 CEST # gpg: using RSA key 0xF407DB0061D5CF40 # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * mreitz/tags/pull-block-2017-05-29-v3: block/file-*: *_parse_filename() and colons block: Fix backing paths for filenames with colons block: Tweak error message related to qemu-img amend qemu-img: Fix leakage of options on error qemu-img: copy *key-secret opts when opening newly created files qemu-img: introduce --target-image-opts for 'convert' command qemu-img: fix --image-opts usage with dd command qemu-img: add support for --object with 'dd' command qemu-img: Fix documentation of convert qcow2: remove extra local_error variable Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
The file drivers' *_parse_filename() implementations just strip the optional protocol prefix off the filename. However, for e.g. "file:foo:bar", this would lead to "foo:bar" being stored as the BDS's filename which looks like it should be managed using the "foo" protocol. This is especially troublesome if you then try to resolve a backing filename based on "foo:bar". This issue can only occur if the stripped part is a relative filename ("file:/foo:bar" will be shortened to "/foo:bar" and having a slash before the first colon means that "/foo" is not recognized as a protocol part). Therefore, we can easily fix it by prepending "./" to such filenames. Before this patch: $ ./qemu-img create -f qcow2 backing.qcow2 64M Formatting 'backing.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 $ ./qemu-img create -f qcow2 -b backing.qcow2 file:top:image.qcow2 Formatting 'file:top:image.qcow2', fmt=qcow2 size=67108864 backing_file=backing.qcow2 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 $ ./qemu-io file:top:image.qcow2 can't open device file:top:image.qcow2: Could not open backing file: Unknown protocol 'top' After this patch: $ ./qemu-io file:top:image.qcow2 [no error] Signed-off-by: NMax Reitz <mreitz@redhat.com> Message-id: 20170522195217.12991-3-mreitz@redhat.com Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com>
-