SEV launch flow requires us to issue LAUNCH_FINISH command before guest
is ready to run.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

During machine creation we encrypted the guest bios image, the
LAUNCH_MEASURE command can be used to retrieve the measurement of
the encrypted memory region. This measurement is a signature of
the memory contents that can be sent to the guest owner as an
attestation that the memory was encrypted correctly by the firmware.
VM management tools like libvirt can query the measurement using
query-sev-launch-measure QMP command.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SEV requires that guest bios must be encrypted before booting the guest.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The KVM_SEV_LAUNCH_UPDATE_DATA command is used to encrypt a guest memory
region using the VM Encryption Key created using LAUNCH_START.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The KVM_SEV_LAUNCH_START command creates a new VM encryption key (VEK).
The encryption key created with the command will be used for encrypting
the bootstrap images (such as guest bios).

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When SEV is enabled, the hardware encryption engine uses a tweak such
that the two identical plaintext at different location will have a
different ciphertexts. So swapping or moving a ciphertexts of two guest
pages will not result in plaintexts being swapped. Hence relocating
a physical backing pages of the SEV guest will require some additional
steps in KVM driver. The KVM_MEMORY_ENCRYPT_{UN,}REG_REGION ioctl can be
used to register/unregister the guest memory region which may contain the
encrypted data. KVM driver will internally handle the relocating physical
backing pages of registered memory regions.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When memory encryption is enabled, KVM_SEV_INIT command is used to
initialize the platform. The command loads the SEV related persistent
data from non-volatile storage and initializes the platform context.
This command should be first issued before invoking any other guest
commands provided by the SEV firmware.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The header file provide the ioctl command and structure to communicate
with /dev/sev device.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>

The QMP query command can used to retrieve the SEV information when
memory encryption is enabled on AMD platform.

Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a new memory encryption object 'sev-guest'. The object will be used
to create encrypted VMs on AMD EPYC CPU. The object provides the properties
to pass guest owner's public Diffie-hellman key, guest policy and session
information required to create the memory encryption context within the
SEV firmware.

e.g to launch SEV guest
 # $QEMU \
    -object sev-guest,id=sev0 \
    -machine ....,memory-encryption=sev0

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Inorder to integerate the Secure Encryption Virtualization (SEV) support
add few high-level memory encryption APIs which can be used for encrypting
the guest memory region.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Split from a patch by Brijesh Singh (brijesh.singh@amd.com).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>

Create a documentation entry to describe the AMD Secure Encrypted
Virtualization (SEV) feature.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When CPU supports memory encryption feature, the property can be used to
specify the encryption object to use when launching an encrypted guest.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This MSR returns the number of #SMIs that occurred on
CPU since boot.

KVM commit 52797bf9a875 ("KVM: x86: Add emulation of MSR_SMI_COUNT")
introduced support for emulating this MSR.

This commit adds support for QEMU to save/load this
MSR for migration purposes.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Note that VIRTIO_GPU_CAPSET_VIRGL2 was added manually so it has to be added
manually after re-running scripts/update-linux-headers.sh.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

7cdc61be vga: fix region calculation

# gpg: Signature made Mon 12 Mar 2018 10:59:24 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180312-pull-request:
  vga: fix region calculation
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

modules: use gmodule-export.
audio: add driver registry, enable module builds.

# gpg: Signature made Mon 12 Mar 2018 10:42:19 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20180312-pull-request:
  audio/sdl: build as module
  audio/pulseaudio: build as module
  audio/oss: build as module
  audio/alsa: build as module
  build: enable audio modules
  audio: add module loading support
  audio: add driver registry
  modules: use gmodule-export
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

gtk,spice: add dmabuf support.
sdl,vnc,gtk: bugfixes.
ui/qapi: add device ID and head parameters to screendump.
build: try improve handling of clang warnings.

# gpg: Signature made Mon 12 Mar 2018 09:13:28 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20180312-pull-request:
  qapi: Add device ID and head parameters to screendump
  spice: add cursor_dmabuf support
  spice: add scanout_dmabuf support
  spice: drop dprint() debug logging
  vnc: deal with surface NULL pointers
  ui/gtk-egl: add cursor_dmabuf support
  ui/gtk-egl: add scanout_dmabuf support
  ui/gtk: use GtkGlArea on wayland only
  ui/opengl: Makefile cleanup
  ui/gtk: group gtk.mo declarations in Makefile
  ui/gtk: make GtkGlArea usage a runtime option
  sdl: workaround bug in sdl 2.0.8 headers
  make: switch language file build to be gtk module aware
  build: try improve handling of clang warnings
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Migration pull 2018-03-09

# gpg: Signature made Fri 09 Mar 2018 17:52:46 GMT
# gpg:                using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20180309a:
  tests: Silence migration-test 'bad' test
  migration: fix applying wrong capabilities
  migration/block: rename MAX_INFLIGHT_IO to MAX_IO_BUFFERS
  migration/block: reset dirty bitmap before read in bulk phase
  migration: do not transfer ram during bulk storage migration
  migration: fix minor finalize leak
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * i.MX: Add i.MX7 SOC implementation and i.MX7 Sabre board
 * Report the correct core count in A53 L2CTLR on the ZynqMP board
 * linux-user: preliminary SVE support work (signal handling)
 * hw/arm/boot: fix memory leak in case of error loading ELF file
 * hw/arm/boot: avoid reading off end of buffer if passed very
   small image file
 * hw/arm: Use more CONFIG switches for the object files
 * target/arm: Add "-cpu max" support
 * hw/arm/virt: Support -machine gic-version=max
 * hw/sd: improve debug tracing
 * hw/sd: sdcard: Add the Tuning Command (CMD 19)
 * MAINTAINERS: add Philippe as odd-fixes maintainer for SD

# gpg: Signature made Fri 09 Mar 2018 17:24:23 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180309: (25 commits)
  MAINTAINERS: Add entries for SD (SDHCI, SDBus, SDCard)
  sdhci: Fix a typo in comment
  sdcard: Add the Tuning Command (CMD19)
  sdcard: Display which protocol is used when tracing (SD or SPI)
  sdcard: Display command name when tracing CMD/ACMD
  sdcard: Do not trace CMD55, except when we already expect an ACMD
  hw/arm/virt: Support -machine gic-version=max
  hw/arm/virt: Add "max" to the list of CPU types "virt" supports
  target/arm: Make 'any' CPU just an alias for 'max'
  target/arm: Add "-cpu max" support
  target/arm: Move definition of 'host' cpu type into cpu.c
  target/arm: Query host CPU features on-demand at instance init
  arm: avoid heap-buffer-overflow in load_aarch64_image
  arm: fix load ELF error leak
  hw/arm: Use more CONFIG switches for the object files
  aarch64-linux-user: Add support for SVE signal frame records
  aarch64-linux-user: Add support for EXTRA signal frame records
  aarch64-linux-user: Remove struct target_aux_context
  aarch64-linux-user: Split out helpers for guest signal handling
  linux-user: Implement aarch64 PR_SVE_SET/GET_VL
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Typically the scanline length and the line offset are identical.  But
in case they are not our calculation for region_end is incorrect.  Using
line_offset is fine for all scanlines, except the last one where we have
to use the actual scanline length.

Fixes: CVE-2018-7550
Reported-by: NRoss Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NPrasad J Pandit <pjp@fedoraproject.org>
Tested-by: NRoss Lagerwall <ross.lagerwall@citrix.com>
Message-id: 20180309143704.13420-1-kraxel@redhat.com

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-8-kraxel@redhat.com

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-7-kraxel@redhat.com

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-6-kraxel@redhat.com

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-5-kraxel@redhat.com

Add audio/ to common-obj-m variable.

Also run both audio and ui variables through unnest-vars.
This avoids sdl.mo (exists in both audio/ and ui/) name clashes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-4-kraxel@redhat.com

Make audio_driver_lookup() try load the module in case it doesn't find
the driver in the registry.  Also load all modules for -audio-help, so
the help output includes the help text for modular audio drivers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-3-kraxel@redhat.com

Add registry for audio drivers, using the existing audio_driver struct.
Make all drivers register themself.  The old list of audio_driver struct
pointers is now a list of audio driver names, specifying the priority
(aka probe order) in case no driver is explicitly asked for.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-2-kraxel@redhat.com

Block layer patches

# gpg: Signature made Fri 09 Mar 2018 15:09:20 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (56 commits)
  qemu-iotests: fix 203 migration completion race
  iotests: Tweak 030 in order to trigger a race condition with parallel jobs
  iotests: Skip test for ENOMEM error
  iotests: Mark all tests executable
  iotests: Test creating overlay when guest running
  qemu-iotests: Test ssh image creation over QMP
  qemu-iotests: Test qcow2 over file image creation with QMP
  block: Fail bdrv_truncate() with negative size
  file-posix: Fix no-op bdrv_truncate() with falloc preallocation
  ssh: Support .bdrv_co_create
  ssh: Pass BlockdevOptionsSsh to connect_to_ssh()
  ssh: QAPIfy host-key-check option
  ssh: Use QAPI BlockdevOptionsSsh object
  sheepdog: Support .bdrv_co_create
  sheepdog: QAPIfy "redundancy" create option
  nfs: Support .bdrv_co_create
  nfs: Use QAPI options in nfs_client_open()
  rbd: Use qemu_rbd_connect() in qemu_rbd_do_create()
  rbd: Assign s->snap/image_name in qemu_rbd_open()
  rbd: Support .bdrv_co_create
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As we want qemu symbols be exported to modules we should use the
gmodule-export-2.0 pkg-config instead of gmodule-2.0.

Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180308085301.8875-2-kraxel@redhat.com

QEMU's screendump command can only take dumps from the primary display.
When using multiple VGA cards, there is no way to get a dump from a
secondary card or other display heads yet. So let's add a 'device' and
a 'head' parameter to the HMP and QMP commands to be able to specify
alternative devices and heads with the screendump command, too.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Acked-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1520267868-31778-1-git-send-email-thuth@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for cursor dmabufs.  qemu has to render the cursor for
that, so in case a cursor is present qemu allocates a new dmabuf, blits
the scanout, blends in the pointer and passes on the new dmabuf to
spice-server.  Without cursor qemu continues to simply pass on the
scanout dmabuf as-is.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180308090618.30147-4-kraxel@redhat.com

Add support for scanout dmabufs.  Just
pass them through to spice-server.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180308090618.30147-3-kraxel@redhat.com

Some calls are deleted, some are converted into tracepoints.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180308090618.30147-2-kraxel@redhat.com

Secondary displays in multihead setups are allowed to have a NULL
DisplaySurface.  Typically user interfaces handle this by hiding the
window which shows the display in question.

This isn't an option for vnc though because it simply hasn't a concept
of windows or outputs.  So handle the situation by showing a placeholder
DisplaySurface instead.  Also check in console_select whenever a surface
is preset in the first place before requesting an update.

This fixes a segfault which can be triggered by switching to an unused
display (via vtrl-alt-<nr>) in a multihead setup, for example using
-device virtio-vga,max_outputs=2.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-id: 20180308161803.6152-1-kraxel@redhat.com

Add support for cursor dmabufs to gtk-egl.  Just blend in the cursor
(if we have one) when rendering the dmabuf.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-7-kraxel@redhat.com

Add support for dmabuf scanouts to gtk-egl.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-6-kraxel@redhat.com

For dma-buf support we need a egl context.  The gtk x11 backend uses glx
contexts though.  We can't use the GtkGlArea widget on x11 because of
that, so use our own gtk-egl code instead.  wayland continues to use
the GtkGlArea widget.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-5-kraxel@redhat.com

With gtk.mo bits moved away we don't need the ifeq any more.
Also add missing opengl libs for some objects.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-4-kraxel@redhat.com