- 14 3月, 2018 11 次提交
-
-
由 Igor Mammedov 提交于
build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_fadt() look like declarative definition of FADT table in ACPI spec, which makes it easy to review. Also it allows easily extending FADT to support other revisions which will be used by follow up patches where build_fadt() will be reused for ARM target. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
move FADT data initialization out of fadt_setup() into dedicated init_fadt_data() that will set common for pc/q35 values in AcpiFadtData structure and acpi_get_pm_info() will complement it with pc/q35 specific values initialization. That will allow to get rid of fadt_setup() and generalize build_fadt() so it could be easily extended for rev5 and reused by ARM target. While at it also move facs/dsdt/xdsdt offsets from build_fadt() arg list into AcpiFadtData, as they belong to the same dataset. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
ACPI_PORT_SMI_CMD is alias for APM_CNT_IOPORT, so make it really one instead of duplicating its value. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
it will help to add Generic Address Structure to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need an explicit conversion. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Drop duplicate in form of Acpi20GenericAddress and reuse AcpiGenericAddress. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
next patch will need it before it gets to piix4/lpc branches that initializes 'obj' now. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
SeaBIOS blob which is currently shipped with QEMU doesn't need acpi-dsdt.aml nor is able to use it and code that loaded it in QEMU was removed by (commit 9fb7aaaf "pc: drop external DSDT loading") in 2013. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Baron 提交于
Although linkspeed and duplex can be set in a linux guest via 'ethtool -s', this requires custom ethtool commands for virtio-net by default. Introduce a new feature flag, VIRTIO_NET_F_SPEED_DUPLEX, which allows the hypervisor to export a linkspeed and duplex setting. The user can subsequently overwrite it later if desired via: 'ethtool -s'. Linkspeed and duplex settings can be set as: '-device virtio-net,speed=10000,duplex=full' where speed is [0...INT_MAX], and duplex is ["half"|"full"]. Signed-off-by: NJason Baron <jbaron@akamai.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtio-dev@lists.oasis-open.org Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Baron 提交于
In prepartion for using some of the high order feature bits, make sure that virtio-net uses 64-bit values everywhere. Signed-off-by: NJason Baron <jbaron@akamai.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtio-dev@lists.oasis-open.org Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Baron 提交于
A subsequent patch to add support for setting linkspeed/duplex in virtio-net, requires a few definitions from ethtool.h, which ends up pulling in kernel.h and sysinfo.h as well. Signed-off-by: NJason Baron <jbaron@akamai.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtio-dev@lists.oasis-open.org
-
由 Peter Maydell 提交于
Python queue, 2018-03-12 # gpg: Signature made Mon 12 Mar 2018 22:10:36 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/python-next-pull-request: device-crash-test: Use 'python' binary qmp.py: Encode json data before sending qemu.py: Use items() instead of iteritems() device-crash-test: New known crashes Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 13 3月, 2018 15 次提交
-
-
由 Peter Maydell 提交于
x86 queue, 2018-03-12 * Intel Processor Trace support * KVM_HINTS_DEDICATED # gpg: Signature made Mon 12 Mar 2018 19:58:39 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-next-pull-request: i386: Add support to get/set/migrate Intel Processor Trace feature i386: Add Intel Processor Trace feature support target-i386: add KVM_HINTS_DEDICATED performance hint Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
docker patches # gpg: Signature made Mon 12 Mar 2018 17:25:57 GMT # gpg: using RSA key CA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/staging-pull-request: tests: make docker-test-debug@fedora run sanitizers Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
# gpg: Signature made Mon 12 Mar 2018 16:01:16 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: block: make BDRV_POLL_WHILE() re-entrancy safe Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
# gpg: Signature made Mon 12 Mar 2018 15:59:54 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: only permit standard C types and fixed size integer types trace: remove use of QEMU specific types from trace probes trace: include filename when printing parser error messages simpletrace: fix timestamp argument type log-for-trace.h: Split out parts of log.h used by trace.h Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Eduardo Habkost 提交于
Now the script works with Python 3, so we can use the 'python' binary provided by the system. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20180312185503.5746-4-ehabkost@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
On Python 3, json.dumps() return a str object, which can't be sent directly through a socket and must be encoded into a bytes object. Use .encode('utf-8'), which will work on both Python 2 and Python 3. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20180312185503.5746-3-ehabkost@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
items() is less efficient on Python 2.x, but makes the code work on both Python 2 and Python 3. Cc: Lukáš Doktor <ldoktor@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Cleber Rosa <crosa@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20180312185503.5746-2-ehabkost@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
We are not running the script on "make check" yet, and additional bugs were introduced recently in the tree. Whitelist the new crashes while we investigate, to allow us to run device-crash-test on "make check" as soon as possible to prevent new bugs. Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: John Snow <jsnow@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20180309202827.12085-5-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Peter Maydell 提交于
usbredir: reorder fields in USBRedirDevice to reduce padding # gpg: Signature made Mon 12 Mar 2018 11:05:19 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20180312-pull-request: usbredir: reorder fields in USBRedirDevice to reduce padding Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Chao Peng 提交于
Add Intel Processor Trace related definition. It also add corresponding part to kvm_get/set_msr and vmstate. Signed-off-by: NChao Peng <chao.p.peng@linux.intel.com> Signed-off-by: NLuwei Kang <luwei.kang@intel.com> Message-Id: <1520182116-16485-2-git-send-email-luwei.kang@intel.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Chao Peng 提交于
Expose Intel Processor Trace feature to guest. To make Intel PT live migration safe and get same CPUID information with same CPU model on diffrent host. CPUID[14] is constant in this patch. Intel PT use EPT is first supported in IceLake, the CPUID[14] get on this machine as default value. Intel PT would be disabled if any machine don't support this minial feature list. Signed-off-by: NChao Peng <chao.p.peng@linux.intel.com> Signed-off-by: NLuwei Kang <luwei.kang@intel.com> Message-Id: <1520182116-16485-1-git-send-email-luwei.kang@intel.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Wanpeng Li 提交于
Add KVM_HINTS_DEDICATED performance hint, guest checks this feature bit to determine if they run on dedicated vCPUs, allowing optimizations such as usage of qspinlocks. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Message-Id: <1518185725-69559-1-git-send-email-wanpengli@tencent.com> [ehabkost: Renamed property to kvm-hint-dedicated] Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Peter Maydell 提交于
7cdc61be vga: fix region calculation # gpg: Signature made Mon 12 Mar 2018 10:59:24 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180312-pull-request: vga: fix region calculation Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Marc-André Lureau 提交于
Since --enable-debug no longer enable sanitizers, we need explicit --enable-sanitizers. llvm package is required for llvm-symbolizer, to get symbols in backtraces. Add make V=1 to get details about failing tests. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180312120849.20073-1-marcandre.lureau@redhat.com> Signed-off-by: NFam Zheng <famz@redhat.com>
-
由 Peter Maydell 提交于
modules: use gmodule-export. audio: add driver registry, enable module builds. # gpg: Signature made Mon 12 Mar 2018 10:42:19 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20180312-pull-request: audio/sdl: build as module audio/pulseaudio: build as module audio/oss: build as module audio/alsa: build as module build: enable audio modules audio: add module loading support audio: add driver registry modules: use gmodule-export Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 12 3月, 2018 14 次提交
-
-
由 Peter Maydell 提交于
gtk,spice: add dmabuf support. sdl,vnc,gtk: bugfixes. ui/qapi: add device ID and head parameters to screendump. build: try improve handling of clang warnings. # gpg: Signature made Mon 12 Mar 2018 09:13:28 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20180312-pull-request: qapi: Add device ID and head parameters to screendump spice: add cursor_dmabuf support spice: add scanout_dmabuf support spice: drop dprint() debug logging vnc: deal with surface NULL pointers ui/gtk-egl: add cursor_dmabuf support ui/gtk-egl: add scanout_dmabuf support ui/gtk: use GtkGlArea on wayland only ui/opengl: Makefile cleanup ui/gtk: group gtk.mo declarations in Makefile ui/gtk: make GtkGlArea usage a runtime option sdl: workaround bug in sdl 2.0.8 headers make: switch language file build to be gtk module aware build: try improve handling of clang warnings Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Migration pull 2018-03-09 # gpg: Signature made Fri 09 Mar 2018 17:52:46 GMT # gpg: using RSA key 0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20180309a: tests: Silence migration-test 'bad' test migration: fix applying wrong capabilities migration/block: rename MAX_INFLIGHT_IO to MAX_IO_BUFFERS migration/block: reset dirty bitmap before read in bulk phase migration: do not transfer ram during bulk storage migration migration: fix minor finalize leak Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
target-arm queue: * i.MX: Add i.MX7 SOC implementation and i.MX7 Sabre board * Report the correct core count in A53 L2CTLR on the ZynqMP board * linux-user: preliminary SVE support work (signal handling) * hw/arm/boot: fix memory leak in case of error loading ELF file * hw/arm/boot: avoid reading off end of buffer if passed very small image file * hw/arm: Use more CONFIG switches for the object files * target/arm: Add "-cpu max" support * hw/arm/virt: Support -machine gic-version=max * hw/sd: improve debug tracing * hw/sd: sdcard: Add the Tuning Command (CMD 19) * MAINTAINERS: add Philippe as odd-fixes maintainer for SD # gpg: Signature made Fri 09 Mar 2018 17:24:23 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180309: (25 commits) MAINTAINERS: Add entries for SD (SDHCI, SDBus, SDCard) sdhci: Fix a typo in comment sdcard: Add the Tuning Command (CMD19) sdcard: Display which protocol is used when tracing (SD or SPI) sdcard: Display command name when tracing CMD/ACMD sdcard: Do not trace CMD55, except when we already expect an ACMD hw/arm/virt: Support -machine gic-version=max hw/arm/virt: Add "max" to the list of CPU types "virt" supports target/arm: Make 'any' CPU just an alias for 'max' target/arm: Add "-cpu max" support target/arm: Move definition of 'host' cpu type into cpu.c target/arm: Query host CPU features on-demand at instance init arm: avoid heap-buffer-overflow in load_aarch64_image arm: fix load ELF error leak hw/arm: Use more CONFIG switches for the object files aarch64-linux-user: Add support for SVE signal frame records aarch64-linux-user: Add support for EXTRA signal frame records aarch64-linux-user: Remove struct target_aux_context aarch64-linux-user: Split out helpers for guest signal handling linux-user: Implement aarch64 PR_SVE_SET/GET_VL ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Daniel P. Berrangé 提交于
Some trace backends will compile code based on the declared trace events. It should not be assumed that the backends can resolve any QEMU specific typedefs. So trace events should restrict their argument types to the standard C types and fixed size integer types. Any complex pointer types can be declared as "void *" for purposes of trace events, since nothing will be dereferencing these pointer arguments. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Message-id: 20180308155524.5082-3-berrange@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Daniel P. Berrangé 提交于
Any compound structs / unions / etc, should always be declared as 'void *' pointers, since it cannot be assumed that trace backends are able to resolve QEMU typedefs. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Message-id: 20180308155524.5082-2-berrange@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Daniel P. Berrangé 提交于
Improves error messages from: ValueError: Error on line 72: need more than 1 value to unpack To ValueError: Error at /home/berrange/src/virt/qemu/trace-events:72: need more than 1 value to unpack Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180306154650.24075-1-berrange@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
The timestamp argument to a trace event method is documented as follows: The method can also take a timestamp argument before the trace event arguments: def runstate_set(self, timestamp, new_state): ... Timestamps have the uint64_t type and are in nanoseconds. In reality methods with a timestamp argument actually receive a tuple like (123456789,) as the timestamp argument. This is due to a bug in simpletrace.py. This patch unpacks the tuple so that methods receive the correct timestamp argument type. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Message-id: 20180222163901.14095-1-stefanha@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Maydell 提交于
A persistent build problem we see is where a source file accidentally omits the #include of log.h. This slips through local developer testing because if you configure with the default (log) trace backend trace.h will pull in log.h for you. Compilation fails only if some other backend is selected. To make this error cause a compile failure regardless of the configured trace backend, split out the parts of log.h that trace.h requires into a new log-for-trace.h header. Since almost all manual uses of the log.h functions will use constants or functions which aren't in log-for-trace.h, this will let us catch missing #include "qemu/log.h" more consistently. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180213140029.8308-1-peter.maydell@linaro.org Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
Nested BDRV_POLL_WHILE() calls can occur. Currently assert(!wait_->wakeup) fails in AIO_WAIT_WHILE() when this happens. This patch converts the bool wait_->need_kick flag to an unsigned wait_->num_waiters counter. Nesting works correctly because outer AIO_WAIT_WHILE() callers evaluate the condition again after the inner caller completes (invoking the inner caller counts as aio_poll() progress). Reported-by: N"fuweiwei (C)" <fuweiwei2@huawei.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Message-id: 20180307124619.6218-1-stefanha@redhat.com Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Gerd Hoffmann 提交于
Typically the scanline length and the line offset are identical. But in case they are not our calculation for region_end is incorrect. Using line_offset is fine for all scanlines, except the last one where we have to use the actual scanline length. Fixes: CVE-2018-7550 Reported-by: NRoss Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NPrasad J Pandit <pjp@fedoraproject.org> Tested-by: NRoss Lagerwall <ross.lagerwall@citrix.com> Message-id: 20180309143704.13420-1-kraxel@redhat.com
-
由 zhenwei.pi 提交于
Changing the current ordering saves 8 bytes per entry in x86_64. Signed-off-by: Nzhenwei.pi <zhenwei.pi@youruncloud.com> Message-id: 1520318781-22644-1-git-send-email-zhenwei.pi@youruncloud.com Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Message-id: 20180306074053.22856-8-kraxel@redhat.com
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Message-id: 20180306074053.22856-7-kraxel@redhat.com
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Message-id: 20180306074053.22856-6-kraxel@redhat.com
-