Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Our _OSC method has a bunch of unused code loading data
into external CTRL and SUPP fields which are then never
used. Drop this in favor of a single local variable.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Commit c611c764 ("virtio: add MemoryListener to cache ring
translations") registers a memory listener to dma_as. This may not
work when IOMMU is enabled: dma_as(bus_master_as) were initialized in
pcibus_machine_done() after virtio_realize(). This will cause a
segfault. Fixing this by using pci_device_iommu_address_space()
instead to make sure address space were initialized at this time.

With this fix, IOMMU device were required to be initialized before any
virtio-pci devices.

Fixes: c611c764 ("virtio: add MemoryListener to cache ring translations")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit 97cd965c ("virtio: use
VRingMemoryRegionCaches for avail and used rings") switched to a memory
region cache to avoid repeated map/unmap operations.

The virtio_load() process is a little tricky because vring addresses are
serialized in two separate places.  VIRTIO 1.0 devices serialize desc
and then a subsection with used and avail.  Legacy devices only
serialize desc.

Live migration of VIRTIO 1.0 devices fails on the destination host with:

  VQ 0 size 0x80 < last_avail_idx 0x12f8 - used_idx 0x0
  Failed to load virtio-blk:virtio
  error while loading state for instance 0x0 of device '0000:00:04.0/virtio-blk'

This happens because the memory region cache is only initialized after
desc is loaded and not after the used and avail subsection is loaded.
If the guest chose memory addresses that don't match the legacy ring
layout then the wrong guest memory location is accessed.

Wait until all ring addresses are known before trying to initialize the
region cache.  Also clarify the incomplete comment about VIRTIO-1 ring
address subsection.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>

Remember to invalidate the avail event field so the memory pages are
marked dirty.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NEric Auger <eric.auger@redhat.com>

Switching to vring caches exposed an existing bug in
virtio_queue_set_notification(): We can't access vring structures
if they have not been set up yet. This may happen, for example,
for virtio-blk devices with multiple queues: The code will try to
switch notifiers for every queue, but the guest may have only set up
a subset of them.

Fix this by guarding access to the vring memory by checking for
vring.desc. The first aio poll will iron out any remaining
inconsistencies for later-configured queues (buggy legacy drivers).
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

If the vring has not been set up, there is nothing in the virtqueue.
virtio_queue_host_notifier_aio_poll calls virtio_queue_empty even in
this case; we have to filter it out just like virtio_queue_notify_aio_vq.
Reported-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Also usable by upcoming VM Generation ID tests
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Add commands to query Virtual Machine Generation ID counter.

QMP command example:
    { "execute": "query-vm-generation-id" }

HMP command example:
    info vm-generation-id
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This implements the VM Generation ID feature by passing a 128-bit
GUID to the guest via a fw_cfg blob.
Any time the GUID changes, an ACPI notify event is sent to the guest

The user interface is a simple device with one parameter:
 - guid (string, must be "auto" or in UUID format
   xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This allows them to be centrally initialized and destroyed

The "AcpiBuildTables.vmgenid" array will be used to construct the
"etc/vmgenid_guid" fw_cfg blob.

Its contents will be linked into fw_cfg after being built on the
pc_machine_done() -> acpi_setup() -> acpi_build() call path, and dropped
without use on the subsequent, guest triggered, acpi_build_update() ->
acpi_build() call path.
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch is based off an earlier version by
Gal Hammer (ghammer@redhat.com)

Requirements section, ASCII diagrams and overall help
provided by Laszlo Ersek (lersek@redhat.com)
Signed-off-by: NGal Hammer <ghammer@redhat.com>
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This is similar to the existing 'add pointer' functionality, but instead
of instructing the guest (BIOS or UEFI) to patch memory, it instructs
the guest to write the pointer back to QEMU via a writeable fw_cfg file.
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Xen 2017/02/28

# gpg: Signature made Tue 28 Feb 2017 19:13:08 GMT
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>"
# gpg:                 aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20170228-tag:
  Add a new qmp command to do checkpoint, query xen replication status
  Add a new qmp command to start/stop replication
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * raspi2: add gpio controller and sdhost controller, with
   the wiring so the guest can switch which controller the
   SD card is attached to
   (this is sufficient to get raspbian kernels to boot)
 * GICv3: support state save/restore from KVM
 * update Linux headers to 4.11
 * refactor and QOMify the ARMv7M container object

# gpg: Signature made Tue 28 Feb 2017 17:11:49 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170228-1: (21 commits)
  bcm2835: add sdhost and gpio controllers
  bcm2835_gpio: add bcm2835 gpio controller
  hw/sd: add card-reparenting function
  qdev: Have qdev_set_parent_bus() handle devices already on a bus
  hw/intc/arm_gicv3_kvm: Reset GICv3 cpu interface registers
  target-arm: Add GICv3CPUState in CPUARMState struct
  hw/intc/arm_gicv3_kvm: Implement get/put functions
  hw/intc/arm_gicv3_kvm: Add ICC_SRE_EL1 register to vmstate
  update Linux headers to 4.11
  update-linux-headers: update for 4.11
  stm32f205: Rename 'nvic' local to 'armv7m'
  stm32f205: Create armv7m object without using armv7m_init()
  armv7m: Split systick out from NVIC
  armv7m: Don't put core v7M devices under CONFIG_STELLARIS
  armv7m: Make bitband device take the address space to access
  armv7m: Make NVIC expose a memory region rather than mapping itself
  armv7m: Make ARMv7M object take memory region link
  armv7m: Use QOMified armv7m object in armv7m_init()
  armv7m: QOMify the armv7m container
  armv7m: Move NVICState struct definition into header
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This pull request have all the fixes for CVE-2016-9602, so that it can
be easily picked up by downstreams, as suggested by Michel Tokarev.

# gpg: Signature made Tue 28 Feb 2017 10:21:32 GMT
# gpg:                using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/cve-2016-9602-for-upstream: (28 commits)
  9pfs: local: drop unused code
  9pfs: local: open2: don't follow symlinks
  9pfs: local: mkdir: don't follow symlinks
  9pfs: local: mknod: don't follow symlinks
  9pfs: local: symlink: don't follow symlinks
  9pfs: local: chown: don't follow symlinks
  9pfs: local: chmod: don't follow symlinks
  9pfs: local: link: don't follow symlinks
  9pfs: local: improve error handling in link op
  9pfs: local: rename: use renameat
  9pfs: local: renameat: don't follow symlinks
  9pfs: local: lstat: don't follow symlinks
  9pfs: local: readlink: don't follow symlinks
  9pfs: local: truncate: don't follow symlinks
  9pfs: local: statfs: don't follow symlinks
  9pfs: local: utimensat: don't follow symlinks
  9pfs: local: remove: don't follow symlinks
  9pfs: local: unlinkat: don't follow symlinks
  9pfs: local: lremovexattr: don't follow symlinks
  9pfs: local: lsetxattr: don't follow symlinks
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Tue 28 Feb 2017 12:40:00 GMT
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/docker-pull-request:
  .shippable: add s390x-cross target
  new: dockerfiles/debian-s390-cross
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Network boot for s390x. More information (and instructions
for building a s390-netboot.img) can be found at
http://wiki.qemu-project.org/Features/S390xNetworkBoot

# gpg: Signature made Tue 28 Feb 2017 11:27:18 GMT
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20170228:
  pc-bios/s390-ccw.img: rebuild image
  pc-bios/s390-ccw: Use the ccw bios to start the network boot
  s390x/ipl: Load network boot image
  s390x/ipl: Extend S390IPLState to support network boot
  elf-loader: Allow late loading of elf
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since commit b0a335e3, a socket write
may trigger a disconnect events, calling vhost_user_stop() and clearing
all the vhost_dev strutures holding data that vhost.c functions expect
to remain valid. Delay the cleanup to keep the vhost_dev structure
valid during the vhost.c functions.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170227104956.24729-1-marcandre.lureau@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.
Signed-off-by: NZhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wencongyang@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>

We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.
Signed-off-by: NZhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wencongyang@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>

This pull request brings:
- a fix to a minor bug reported by Coverity
- throttling support in the local backend (command line only)

# gpg: Signature made Tue 28 Feb 2017 09:32:30 GMT
# gpg:                using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  throttle: factor out duplicate code
  fsdev: add IO throttle support to fsdev devices
  9pfs: fix v9fs_lock error case
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds the bcm2835_sdhost and bcm2835_gpio to the BCM2835 platform.

For supporting the SD controller selection (alternate function of GPIOs
48-53), the bcm2835_gpio now exposes an sdbus.
It also has a link to both the sdbus of sdhci and sdhost controllers,
and the card is reparented from one bus to another when the alternate
function of GPIOs 48-53 is modified.
Signed-off-by: NClement Deschamps <clement.deschamps@antfield.fr>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1488293711-14195-5-git-send-email-peter.maydell@linaro.org
Message-id: 20170224164021.9066-5-clement.deschamps@antfield.fr
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds the BCM2835 GPIO controller.

It currently implements:
- The 54 GPIOs as outputs (qemu_irq)
- The SD controller selection via alternate function of GPIOs 48-53
Signed-off-by: NClement Deschamps <clement.deschamps@antfield.fr>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1488293711-14195-4-git-send-email-peter.maydell@linaro.org
Message-id: 20170224164021.9066-4-clement.deschamps@antfield.fr
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Provide a new function sdbus_reparent_card() in sd core for reparenting
a card from a SDBus to another one.

This function is required by the raspi platform, where the two SD
controllers can be dynamically switched.
Signed-off-by: NClement Deschamps <clement.deschamps@antfield.fr>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org
Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: added a doc comment to the header file; changed to
 use new behaviour of qdev_set_parent_bus()]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Instead of qdev_set_parent_bus() silently doing the wrong
thing if it's handed a device that's already on a bus,
have it remove the device from the old bus and add it to
the new one. This is useful for the raspi2 sdcard.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Message-id: 1488293711-14195-2-git-send-email-peter.maydell@linaro.org

Reset CPU interface registers of GICv3 when CPU is reset.
For this, ARMCPRegInfo struct is registered with one ICC
register whose resetfn is called when cpu is reset.

All the ICC registers are reset under one single register
reset function instead of calling resetfn for each ICC
register.
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-6-git-send-email-vijay.kilari@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add gicv3state void pointer to CPUARMState struct
to store GICv3CPUState.

In case of usecase like CPU reset, we need to reset
GICv3CPUState of the CPU. In such scenario, this pointer
becomes handy.
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This actually implements pre_save and post_load methods for in-kernel
vGICv3.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Message-id: 1487850673-26455-4-git-send-email-vijay.kilari@gmail.com
[PMM:
 * use decimal, not 0bnnn
 * fixed typo in names of ICC_APR0R_EL1 and ICC_AP1R_EL1
 * completely rearranged the get and put functions to read and write
   the state in a natural order, rather than mixing distributor and
   redistributor state together]
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
[Vijay:
 * Update macro KVM_VGIC_ATTR
 * Use 32 bit access for gicd and gicr
 * GICD_IROUTER, GICD_TYPER, GICR_PROPBASER and GICR_PENDBASER reg
   access  are changed from 64-bit to 32-bit access
 * Add ICC_SRE_EL1 save and restore
 * Dropped translate_fn mechanism and coded functions to handle
   save and restore of edge_trigger and priority
 * Number of APnR register saved/restored based on number of
   priority bits supported]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

To Save and Restore ICC_SRE_EL1 register introduce vmstate
subsection and load only if non-zero.
Also initialize icc_sre_el1 with to 0x7 in pre_load
function.
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-3-git-send-email-vijay.kilari@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

trivial patches for 2017-02-28

# gpg: Signature made Tue 28 Feb 2017 06:43:55 GMT
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch:
  syscall: fixed mincore(2) not failing with ENOMEM
  hw/acpi/tco.c: fix tco timer stop
  lm32: milkymist-tmu2: fix a third integer overflow
  qemu-options.hx: add missing id=chr0 chardev argument in vhost-user example
  Update copyright year
  tests/prom-env: Enable the test for the sun4u machine, too
  cadence_gem: Remove unused parameter debug message
  register: fix incorrect read mask
  ide: remove undefined behavior in ide-test
  CODING_STYLE: Mention preferred comment form
  hw/core/register: Mark the device with cannot_instantiate_with_device_add_yet
  hw/core/or-irq: Mark the device with cannot_instantiate_with_device_add_yet
  softfloat: Use correct type in float64_to_uint64_round_to_zero()
  target/s390x: Fix typo
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio_mmio.h would be deleted; I am leaving it in though it was a
mistake to add it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The linux-headers/asm-arm/unistd.h file has been split in three
sub-files, copy them along.  However, building them requires
setting ARCH rather than SRCARCH.

SRCARCH defaults to $(ARCH) anyway; to avoid future occurrence of
the same problem use ARCH for all architectures where SRCARCH=ARCH.
Currently these are all except x86, sparc, sh and tile.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 20170221122920.16245-2-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The local variable 'nvic' in stm32f205_soc_realize() no longer
holds a direct pointer to the NVIC device; it is a pointer to
the ARMv7M container object. Rename it 'armv7m' accordingly.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-12-git-send-email-peter.maydell@linaro.org

Switch the stm32f205 SoC to create the armv7m object directly
rather than via the armv7m_init() wrapper. This fits better
with the SoC model's very QOMified design.

In particular this means we can push loading the guest image
out to the top level board code where it belongs, rather
than the SoC object having a QOM property for the filename
to load.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org

The SysTick timer isn't really part of the NVIC proper;
we just modelled it that way back when we couldn't
easily have devices that only occupied a small chunk
of a memory region. Split it out into its own device.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

The NVIC is a core v7M device that exists for all v7M CPUs;
put it under a CONFIG_ARM_V7M rather than hiding it under
CONFIG_STELLARIS.

(We'll use CONFIG_ARM_V7M for the SysTick device too
when we split it out of the NVIC.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org

Instead of the bitband device doing a cpu_physical_memory_read/write,
make it take a MemoryRegion which specifies where it should be
accessing, and use address_space_read/write to access the
corresponding AddressSpace.

Since this entails pretty much a rewrite, convert away from
old_mmio in the process.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-8-git-send-email-peter.maydell@linaro.org

Make the NVIC device expose a memory region for its users
to map, rather than mapping itself into the system memory
space on realize, and get the one user (the ARMv7M object)
to do this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-7-git-send-email-peter.maydell@linaro.org