Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QError is a high-level data type which represents an exception
in QEMU, it stores the following error information:

- class          Error class name (eg. "ServiceUnavailable")
- description    A detailed error description, which can contain
                 references to run-time error data
- filename       The file name of where the error occurred
- line number    The exact line number of the error
- function       The function name of where the error occurred
- run-time data  Any run-time error data
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Thanks to f527c579
(fix parallel build), these prerequisites
are redundant now and can be removed.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Replace defconfing -> defconfig
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Implement MAXIM SD1338 RTC+NVRAM.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Add makefile dependencies for target specific device configs.
These will copy the default config if none exists, obsoleting the old
configure time code.  If a config already exists but is older than the
default then print a warning.

Also remove config-devices.h.  Code does not and should not care which
devices are being built.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

We should install linuxboot.bin too, so let's add it to the to-be-installed
blobs.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This provides a QObject interface for creating QObjects from a JSON expression.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is the third and final stage of the JSON parser.  It parses lexical tokens
performing grammar validation and creating the final QObject representation.  It
uses a recursive decent parser.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The second stage of our JSON parser is a simple state machine that identifies
individual JSON values by counting the levels of nesting of tokens.  It does
not perform grammar validation.  We use this to emit a full JSON value to the
parser.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Our JSON parser is a three stage parser.  The first stage tokenizes the stream
into a set of lexical tokens.  Since the lexical grammar is regular, we can
use a finite state machine to model it.  The state machine will emit tokens
as they are identified.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch introduces block migration called during live migration. Block
are being copied to the destination in an async way. First the code will
transfer the whole disk and then transfer all dirty blocks accumulted during
the migration.
Still need to improve transition from the iterative phase of migration to the
end phase. For now transition will take place when all blocks transfered once,
all the dirty blocks will be transfered during the end phase (guest is
suspended).

Changes from v4:
- Global variabels moved to a global state structure allocated dynamically.
- Minor coding style issues.
- Poll block.c for tracking of dirty blocks instead of manage it here.
Signed-off-by: NLiran Schour <lirans@il.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch fixes clean in case of missing directories and
also adds code to distclean that removes the following files:
 qemu-monitor.texi roms/seabios/config.mak roms/vgabios/config.mak
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Based on a ideas of Daniel Jacobowitz + Stefan Weil
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* Remove 2nd entry for pxe-pcnet.bin.
  This kind of error can be avoided by sorting
  entries. So all pxe-*.bin entries are now sorted
  alphabetically.
* Rename pxe-eepro100.bin -> pxe-i82559er.bin.
  This change completes another patch which did
  the rename on the pxe image for i82559er.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Replace
	GEN  config-all-devices.mak
by
	GEN   config-all-devices.mak

Like this, the logging output is column aligned.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is needed also for qemu-io, but not for qemu-nbd.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since config-host.h is generated by the Makefile (1215c6e7),
building (only) qemu-img fails:

[user@f12-uri qemu]$ make distclean (or git clone qemu)
[user@f12-uri qemu]$ ./configure ...
[user@f12-uri qemu]$ make qemu-img
GEN  config-all-devices.mak
GEN   qemu-img-cmds.h
CC    qemu-img.o
In file included from qemu-img.c:24:
qemu-common.h:32:25: error: config-host.h: No such file or directory
Signed-off-by: NUri Lublin <uril@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

etherboot is deprecated and not under active development anymore.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Okay, this makes the tap options available on AIX even though there's
no support, but if we want to do it right we should have not compile
the tap code at all on AIX using e.g. CONFIG_TAP.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Also add a new net/checksum.h header
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

[v2: handle building in a separate dir]
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch makes make quiet again.

There is already a similar patch from Juan Quintela,
but maybe this shorter form is preferred.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The packet queue code is fairly standalone, has some complex details and
easily reusable. It makes sense to split it out on its own. This patch
doesn't contain any functional changes.

Patchworks-ID: 35511
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

This suite contains tests to assure that QList API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qlist

Patchworks-ID: 35333
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QList is a high-level data type that can be used to store QObjects
in a singly-linked list.

The following functions are available:

- qlist_new()    Create a new QList
- qlist_append() Append a QObject to the list
- qlist_iter()   Iterate over stored QObjects

Patchworks-ID: 35334
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35221
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35220
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>