Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

scanf calls must not use PRI constants, they have probably the wrong size and
corrupt memory. We could replace them by SCN ones, but strtol is simpler than
scanf here anyway. While at it, also fix the parsers to reject garbage after
the number ("4096xyz" was accepted before).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Richard Henderson <rth@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NShahar Havivi <shaharh@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NShahar Havivi <shaharh@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit 50e32ea8 changed the behaviour
for the return type of net_client_init() when a nic type with no init
method was specified. 'none' is one such nic type. Instead of returning
0, which gets interpreted as an index into the nd_table[] array, we
switched to returning -1, which signifies an error as well.

That broke VM start with '-net none'. Testing was only done with the
monitor command 'pci_add', which doesn't fail.

The correct fix would still be to return 0+ values from
net_client_init() only when the return value can be used as an index to
refer to an entry in nd_table[]. With the current code, callers can
erroneously poke into nd_table[0] when -net nic is used, which can lead
to badness.

However, this commit just returns to the previous behaviour before the
offending commit.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We currently only clear SVM_EVTINJ_VALID after successful interrupt
delivery. This apparently does not match real hardware which clears the
whole event_inj field on every vmexit, including unsuccessful interrupt
delivery.
Reported-by: NErik van der Kouwe <vdkouwe@cs.vu.nl>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The commit 8e65b7c0 introduced
expire_time of UHCIState. But expire_time is not in vmstate, the
second uhci_frame_timer will not be fired immediately after loadvm.
Signed-off-by: NTeLeMan <geleman@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For all i, ports_map[i] is used in and only in the i-th iteration.
Replace the dynamic array by a scalar variable.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch avoids handling write watchpoints on read-only memory access.
It also breaks the searching loop for watchpoint once the setup for
handling watchpoint later is done.
Signed-off-by: NJun Koi <junkoi2004@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

lsi_bad_phase has a bug in the choice of pmjad1/pmjad2.  This does
not matter with Linux guests because it uses just one routine for
both, but it breaks Windows 64-bit guests.  This is the text
from the spec:

   "[The PMJCTL] bit controls which decision mechanism is used
   when jumping on phase mismatch. When this bit is cleared the
   LSI53C895A will use Phase Mismatch Jump Address 1 (PMJAD1) when
   the WSR bit is cleared and Phase Mismatch Jump Address 2 (PMJAD2)
   when the WSR bit is set.  When this bit is set the LSI53C895A will
   use jump address one (PMJAD1) on data out (data out, command,
   message out) transfers and jump address two (PMJAD2) on data in
   (data in, status, message in) transfers."

Which means:

    CCNTL0.PMJCTL
        0              SCNTL2.WSR = 0             PMJAD1
        0              SCNTL2.WSR = 1             PMJAD2
        1                    out                  PMJAD1
        1                    in                   PMJAD2

In qemu, what you get instead is:

    CCNTL0.PMJCTL
        0                    out                  PMJAD1
        0                    in                   PMJAD2    <<<<<
        1                    out                  PMJAD1
        1                    in                   PMJAD1    <<<<<

Considering that qemu always has SCNTL2.WSR cleared, the two marked cases
(corresponding to phase mismatch on input) are always jumping to the
wrong PMJAD register.  The patch implements the correct semantics.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Original patch from Ulrich Hecht, further work from Alexander Graf
and Richard Henderson.

Cc: Ulrich Hecht <uli@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We need not reserve the register unless we're going to use it.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We can support it in KVM now. The 0xd leaf is queried from KVM.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>