We missed the iothread related args in this file.
This patch is used to fix this issue.
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Message-Id: <20190426090730.2691-4-chen.zhang@intel.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Message-Id: <20190426090730.2691-3-chen.zhang@intel.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

The colo_do_failover no need the input parameter.
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Message-Id: <20190426090730.2691-2-chen.zhang@intel.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

The only caller that checks the error code is looking for != 0,
so returning false is incorrect.

Fixes: 5aaac467 "migration: savevm: consult migration blockers"
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Message-Id: <b991a4d0e6c4253bc08b2794c6084be55fc72e1d.1554851834.git.crobinso@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

subsection_found is true implies vmdesc is not NULL.

This patch remove the additional check on vmdesc and rename
subsection_found to vmdesc_has_subsections to make it more self-explain.
Signed-off-by: NWei Yang <richardw.yang@linux.intel.com>

Message-Id: <20190403011016.12549-1-richardw.yang@linux.intel.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

MigrationState->xfer_limit is only set to 0 in migrate_init().

Remove this unnecessary field.
Signed-off-by: NWei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190326055726.10539-1-richardw.yang@linux.intel.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

During each iteration, se->ops is checked before each loop. So it is not
necessary to check it again and simplify the following check a little.
Signed-off-by: NWei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190327013130.26259-1-richardw.yang@linux.intel.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

It is error prone to use VMSTATE_UNUSED*() sometimes especially when
the size of the migration stream of the field is not the same as the
size of the structure (boolean is one example).  Comment it well so
people will be aware of this when people want to use it.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20190329095713.14177-1-peterx@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Improve code generation for vector duplication.
Add vector expansions for shifts by non-constant scalar.
Add vector expansions for shifts by vector.
Add integer and vector expansions for absolute value.
Several patches in preparation for Altivec.
Bug fix for tcg/aarch64 vs min/max.

# gpg: Signature made Tue 14 May 2019 00:58:02 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190513: (31 commits)
  tcg/aarch64: Do not advertise minmax for MO_64
  target/xtensa: Use tcg_gen_abs_i32
  target/tricore: Use tcg_gen_abs_tl
  target/s390x: Use tcg_gen_abs_i64
  target/ppc: Use tcg_gen_abs_tl
  target/ppc: Use tcg_gen_abs_i32
  target/cris: Use tcg_gen_abs_tl
  target/arm: Use tcg_gen_abs_i64 and tcg_gen_gvec_abs
  tcg/aarch64: Support vector absolute value
  tcg/i386: Support vector absolute value
  tcg: Add support for vector absolute value
  tcg: Add support for integer absolute value
  tcg/i386: Support vector scalar shift opcodes
  tcg: Add gvec expanders for vector shift by scalar
  tcg/aarch64: Support vector variable shift opcodes
  tcg/i386: Support vector variable shift opcodes
  tcg: Add gvec expanders for variable shift
  tcg: Add INDEX_op_dupm_vec
  tcg/aarch64: Implement tcg_out_dupm_vec
  tcg/i386: Implement tcg_out_dupm_vec
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The min/max instructions are not available for 64-bit elements.

Fixes: 93f332a5Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190423102145.14812-3-f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190423102145.14812-2-f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Allow expansion either via shift by scalar or by replicating
the scalar for shift by vector.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
---
v3: Use a private structure for do_gvec_shifts.

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The gvec expanders perform a modulo on the shift count.  If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first.  This is especially important
if integer/vector register moves do not exist.

Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:

  VECE == 32/64:
    Load the value into a vector register, then dup.
    Both of these must work.

  VECE == 8/16:
    If the value happens to be at an offset such that an aligned
    load would place the desired value in the least significant
    end of the register, go ahead and load w/garbage in high bits.

    Load the value w/INDEX_op_ld{8,16}_i32.
    Attempt a move directly to vector reg, which may fail.
    Store the value into the backing store for OTS.
    Load the value into the vector reg w/TCG_TYPE_I32, which must work.
    Duplicate from the vector reg into itself, which must work.

All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The LD1R instruction does all the work.  Note that the only
useful addressing mode is a base register with no offset.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

At the same time, improve tcg_out_dupi_vec wrt broadcast
from the constant pool.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Currently stubbed out in all backends that support vectors.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
---
v3: Added some commentary to the tcg_reg_alloc_* functions.

The i386 backend already has these functions, and the aarch64 backend
could easily split out one.  Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.

Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

PowerPC Altivec does not support direct moves between vector registers
and general registers.  So when tcg_out_mov fails, we can use the
backing memory for the temporary to perform the move.
Acked-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This patch merely changes the interface, aborting on all failures,
of which there are currently none.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

We have a function that takes an additional condition parameter
over the standard backend interface.  It already takes care of
eliding no-op moves.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The only fixed_reg is cpu_env, and it should not be modified
during any TB.  Therefore code that tries to special-case moves
into a fixed_reg is dead.  Remove it.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Replace the single opcode in .opc with a null-terminated
array in .opt_opc.  We still require that all opcodes be
used with the same .vece.

Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion.  Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.

Convert all existing vector aware front ends.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

PowerPC Altivec does not support add and subtract of 64-bit elements.
Prepare for that configuration by not assuming the operation is
universally supported.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Use tcg_can_emit_vec_op instead of just TCG_TARGET_HAS_neg_vec,
so that we check the type and vece for the actual operation.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20190416185301.25344-2-david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>