Instead of accepting every DHCP/BOOTP and TFTP packet, only invoke the
built-in servers if the target is the virtual host.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

All other boolean arguments accept on|off - except for slirp's restrict.
Fix that while still accepting the formerly allowed yes|y|no|n, but
reject everything else. This avoids accidentally allowing external
connections because syntax errors were so far interpreted as
'restrict=no'.

CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This aligns the code to what the documentation claims: Allow everything
but requests that would have to be routed outside of the virtual LAN.

So we need to drop the unneeded IP-level filter, allow TFTP requests,
and add the missing protocol-level filter to ICMP.

CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Superseded by -machine. Therefore, this patch removes -M from the help
list and pushes -machine at the same place in the output.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

-machine somehow suggests that it selects the machine, but it doesn't.
Fix that before this command is set in stone.

Actually, -machine should supersede -M and allow to introduce arbitrary
per-machine options to the command line. That will change the internal
realization again, but we will be able to keep the user interface
stable.
Tested-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

FS-Freeze only works with Linux.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This change is needed because commit 06e12b65
now uses an unsigned long long value
(uint64_t && unsigned long long => unsigned long long).

Cc: Tsuneo Saito <tsnsaito@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.

Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)

Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
   a usb-redir device using this chardev:
qemu ... \
  -readconfig docs/ich9-ehci-uhci.cfg \
  -chardev socket,id=usbredirchardev,host=localhost,port=4000 \
  -device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

"next" is reserved in systemtap thus using this as a
trace parameter name causes trouble when trying to trace
with systemtap.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Spec on UHCI_STS_USBERR: "If the TD on which the error interrupt
occurred also had its IOC bit set, both this bit and Bit 0 are set."

Make UHCI emulation do that.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove leftover calls to usb_hid_changed().

Take care to update the changed flag after delivering a event via
GET_REPORT like we do when sending events via interrupt endpoint.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch implements MMU faults caused by TTE.NFO and TTE.E:
- access other than nonfaulting load to a page marked NFO should
  raise data_access_exception
- nonfaulting load to a page marked with E bit should raise
  data_access_exception

To distinguish nonfaulting loads, this patch extends (abuses?) the rw
argument of get_physical_address_data().  rw is set to 4 on nonfaulting
loads.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Nonfaulting loads should raise fast_data_access_MMU_miss traps as
normal loads do.  It is up to the guest OS kernel that detect MMU misses
on nonfaulting load instructions and make them complete without signaling.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

cpu_get_phys_page_nofault() calls get_physical_address() twice,
that results in overwriting the fault status in the SFSR.
We need this change in order for nonfaulting loads to raising MMU faults
as normal loads do.
Also removed the call to cpu_get_physical_page_desc() since we are
going to modify nonfaulting loads raising MMU faults.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch makes cpu_get_phys_page_debug() independent from
cpu_get_phys_page_nofault() in advance of implementing nonfaulting load.
This also modifies cpu_get_phys_page_nofault() to be compiled only on
TARGET_SPARC64 because it is not required on SPARC32.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Introduce cpu_sparc_get_phys_page() to be used as a help for splitting
cpu_get_phys_page_debug() from cpu_get_phys_page_nofault().
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add macros for SFSR fields and use macros instead of magic numbers.
Also fix the update of the register fields on MMU faults.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add macros for TTE bits and modify to use macros instead of
magic numbers.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This adds the initial set of QMP/QAPI commands provided by the guest
agent:

guest-sync
guest-ping
guest-info
guest-shutdown
guest-file-open
guest-file-read
guest-file-write
guest-file-seek
guest-file-flush
guest-file-close
guest-fsfreeze-freeze
guest-fsfreeze-thaw
guest-fsfreeze-status

The input/output specification for these commands are documented in the
schema.

Example usage:

  host:
    qemu -device virtio-serial \
         -chardev socket,path=/tmp/vs0.sock,server,nowait,id=qga0 \
         -device virtserialport,chardev=qga0,name=org.qemu.quest_agent.0
         ...

    echo "{'execute':'guest-info'}" | socat stdio unix-connect:/tmp/qga0.sock

  guest:
    qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
            -p /var/run/qemu-guest-agent.pid -d
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.

A shorthand invocation:

  qemu-ga -d

Is equivalent to:

  qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
          -f /var/run/qemu-ga.pid -d
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Missing from previous addition of error to qerror.h. Needed for
qerror_format() and friends.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

This is how QMP commands/parameters/types would be defined. We use a
subset of that functionality here to implement functions/types for unit
testing.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

This is the code generator for qapi command marshaling/dispatch.
Currently only generators for synchronous qapi/qmp functions are
supported. This script generates the following files:

  $(prefix)qmp-marshal.c: command marshal/dispatch functions for each
                          QMP command defined in the schema. Functions
                          generated by qapi-visit.py are used to
                          convert qobjects recieved from the wire into
                          function parameters, and uses the same
                          visiter functions to convert native C return
                          values to qobjects from transmission back
                          over the wire.

  $(prefix)qmp-commands.h: Function prototypes for the QMP commands
                           specified in the schema.

$(prefix) is used in the same manner as with qapi-types.py
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

This is the code generator for qapi visiter functions used to
marshal/unmarshal/dealloc qapi types. It generates the following 2
files:

  $(prefix)qapi-visit.c: visiter function for a particular c type, used
                         to automagically convert qobjects into the
                         corresponding C type and vice-versa, and well
                         as for deallocation memory for an existing C
                         type

  $(prefix)qapi-visit.h: declarations for previously mentioned visiter
                         functions

$(prefix) is used as decribed for qapi-types.py
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

This is the code generator for qapi types. It will generation the
following files:

  $(prefix)qapi-types.h - C types corresponding to types defined in
                          the schema you pass in
  $(prefix)qapi-types.c - Cleanup functions for the above C types

The $(prefix) is used to as a namespace to keep the generated code from
one schema/code-generation separated from others so code and be
generated from multiple schemas with clobbering previously created code.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

We need this to parse dictionaries with schema ordering intact so that C
prototypes can be generated deterministically.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Given an object recieved via QMP, this code uses the dispatch table
provided by qmp_registry.c to call the corresponding marshalling/dispatch
function and format return values/errors for delivery to the QMP.
Currently only synchronous QMP functions are supported, but this will
also be used for async QMP functions and QMP guest proxy dispatch as
well.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Registration/lookup functions for that provide a lookup table for
dispatching QMP commands.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>

Type of Visitor class that can be passed into a qapi-generated C
type's visitor function to free() any heap-allocated data types.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>