Add logic to also build+install the isavga vgabios variant.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Recurse into vgabios once, adjust dependencies, call make using
$(MAKE) $(MAKEFLAGS) so jobserver mode works.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If the host lacks SOCK_CLOEXEC, bail out with -EINVAL.
If the host lacks SOCK_ONONBLOCK, try to emulate it with fcntl()
and O_NONBLOCK.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

With nptl enabled, atomic_cmpxchg_32 and atomic_barrier
system calls are needed. This patch enabled really dummy
versions of the system calls, modeled after the m68k
kernel code.

With this patch I am able to execute m68k binaries
with qemu linux-user (busybox compiled for coldfire).

[v2] que an segfault instead of returning a EFAULT
to keep in line with kernel code.

Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

microMIPS instructions that cause breakpoint exceptions come in
16-bit and 32-bit variants.  When handling exceptions caused by
such instructions, the instruction type needs to be taken into
account when extracting the break code.

The code has also been restructured for better clarity.
Signed-off-by: NKwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Previous implementation does not take into account that SOL_SOCKET constant
can be arch specific. This change fixes some issues with sendmsg/recvmsg.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The binfmt_misc module can calculate the credentials and security
token according to the binary instead of to the interpreter if the
'C' flag is enabled.

To be able to execute non-readable binaries, this flag implies 'O'
flag. When 'O' flag is enabled, bintfmt_misc opens the file for
reading and pass the file descriptor to the interpreter.

References:
linux/Documentation/binfmt_misc.txt          ['O' and 'C' description]
linux/fs/binfmt_misc.c linux/fs/binfmt_elf.c [ AT_EXECFD usage ]
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

This is needed to be able to run dhclient.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

This patch allows to have IP addresses in correct order
in the case of "netstat -nr" when the endianess of the
guest differs from one of the host.

For instance, an m68k guest on an x86_64 host:

WITHOUT this patch:

$ netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
0.0.0.0         1.3.0.10        0.0.0.0         UG        0 0          0 eth0
0.3.0.10        0.0.0.0         0.255.255.255   U         0 0          0 eth0
$ cat /proc/net/route
Iface	Destination	Gateway 	Flags	RefCnt	Use	Metric	Mask	MTU	Window	IRTT

eth0	00000000	0103000A	0003	0	0	0	000000000	0	0
eth0	0003000A	00000000	0001	0	0	0	00FFFFFF0	0	0

WITH this patch:

$ netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
0.0.0.0         10.0.3.1        0.0.0.0         UG        0 0          0 eth0
10.0.3.0        0.0.0.0         255.255.255.0   U         0 0          0 eth0
$ cat /proc/net/route
Iface	Destination	Gateway 	Flags	RefCnt	Use	Metric	Mask	MTU	Window	IRTT
eth0	00000000	0a000301	0003	0	0	0	000000000	0	0
eth0	0a000300	00000000	0001	0	0	0	ffffff000	0	0
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The name field of MIPS_SYS isn't actually used; it's just documentation.
But adjust the umount entries to match mips/syscall_nr.h anyway.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

It has been pointed out on LKML that the alpha umount syscall numbers
are named wrong, and a patch to rectify that has been posted for 3.11.

Glibc works around this by treating NR_umount as NR_umount2 if
NR_oldumount exists.  That's more complicated than we need in QEMU,
given that we control linux-user/*/syscall_nr.h.

This is the last instance of TARGET_NR_oldumount, so delete that from
the strace.list.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

# By Alexey Kardashevskiy
# Via Stefan Hajnoczi
* stefanha/tracing:
  kvm: fix traces to use %x instead of %d

Message-id: 1379699931-5837-1-git-send-email-stefanha@redhat.com

# By Aurelien Jarno (1) and Vincenzo Maffione (1)
# Via Stefan Hajnoczi
* stefanha/net:
  e1000: NetClientInfo.receive_iov implemented
  pcnet-pci: mark I/O and MMIO as LITTLE_ENDIAN

Message-id: 1379699613-5338-1-git-send-email-stefanha@redhat.com

# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
  virtio-blk: do not relay a previous driver's WCE configuration to the current
  blockdev: do not default cache.no-flush to true
  block: don't lose data from last incomplete sector
  qcow2: Correct snapshots size for overlap check
  coroutine: fix /perf/nesting coroutine benchmark
  coroutine: add qemu_coroutine_yield benchmark
  qemu-timer: do not take the lock in timer_pending
  qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
  qemu-timer: drop outdated signal safety comments
  osdep: warn if open(O_DIRECT) on fails with EINVAL
  libcacard: link against qemu-error.o for error_report()

Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com

# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  tests/.gitignore: ignore test-throttle
  exec: Fix broken build for MinGW (regression)
  kvm: Fix compiler warning (clang)
  tcg-sparc: Fix parenthesis warning
  Makefile: Remove some more files when cleaning
  target-i386: Fix segment cache dump
  iov: avoid "orig_len may be used unitialized" warning
  vscclient: remove unnecessary use of uninitialized variable
  trace-events: Clean up with scripts/cleanup-trace-events.pl again
  tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
  *-user: Improve documentation for lock_user function
  MAINTAINERS: Add missing entry to filelist for TCI target
  translate-all: Fix formatting of dump output
  *-user: Fix typo in comment (ulocking -> unlocking)
  docs: Fix IO port number for CPU present bitmap.
  q35: Fix typo in constant DEFUALT -> DEFAULT.
  configure: Undefine _FORTIFY_SOURCE prior using it

Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru

# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
  target-i386: add feature kvm_pv_unhalt
  linux-headers: update to 3.12-rc1
  target-i386: forward CPUID cache leaves when -cpu host is used
  linux-headers: update to 3.11
  kvm: fix traces to use %x instead of %d
  kvmvapic: Clear also physical ROM address when entering INACTIVE state
  kvmvapic: Enter inactive state on hardware reset
  kvmvapic: Catch invalid ROM size
  kvm irqfd: support direct msimessage to irq translation
  fix steal time MSR vmsd callback to proper opaque type
  kvm: warn if num cpus is greater than num recommended
  cpu: Move cpu state syncs up into cpu_dump_state()
  exec: always use MADV_DONTFORK

Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com

# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
  block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
  lsi: add 53C810 variant
  lsi: remove todo
  lsi: ignore write accesses to CTEST0 registers
  lsi: check ssid versus sdid only if ssid is valid
  lsi: use constant name instead of its value

KVM request types are normally defined using hex constants but QEMU traces
print decimal values instead, which is not very convenient.

This changes the request type format from %d to %x.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch implements the NetClientInfo.receive_iov method for the
e1000 device emulation. In this way a network backend that uses
qemu_sendv_packet() can deliver the fragmented packet without
requiring an additional copy in the frontend/backend network code
(nc_sendv_compat() function).

The existing method NetClientInfo.receive has been reimplemented
using the new method.
Signed-off-by: NVincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Now that the memory subsystem is propagating the endianness correctly,
the pcnet-pci device should have its I/O ports and MMIO memory marked
as LITTLE_ENDIAN, as PCI devices are little endian.

This makes the pcnet-pci NIC to work again on big endian MIPS Malta
(default NIC).

Cc: qemu-stable@nongnu.org
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The following sequence happens:
- the SeaBIOS virtio-blk driver does not support the WCE feature, which
causes QEMU to disable writeback caching

- the Linux virtio-blk driver resets the device, finds WCE is available
but writeback caching is disabled; tells block layer to not send cache
flush commands

- the Linux virtio-blk driver sets the DRIVER_OK bit, which causes
writeback caching to be re-enabled, but the Linux virtio-blk driver does
not know of this side effect and cache flushes remain disabled

The bug is at the third step.  If the guest does know about CONFIG_WCE,
QEMU should ignore the WCE feature's state.  The guest will control the
cache mode solely using configuration space.  This change makes Linux
do flushes correctly, but Linux will keep SeaBIOS's writethrough mode.

Hence, whenever the guest is reset, the cache mode of the disk should
be reset to whatever was specified in the "-drive" option.  With this
change, the Linux virtio-blk driver finds that writeback caching is
enabled, and tells the block layer to send cache flush commands
appropriately.

Reported-by: Rusty Russell <rusty@au1.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

That's why all my VMs were so fast lately. :)

This changed in 1.6.0 by mistake in patch 29c4e2b5 (blockdev: Split up
'cache' option, 2013-07-18).

Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

To read the last sector that is not aligned to sector boundary, current
code for growable backends, since commit 893a8f62 "block: Produce zeros
when protocols reading beyond end of file", drops the data and directly
returns zeroes. That is incorrect.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit 3435f395 reduced the ifdeffery with
this result for MinGW:

exec.c: In function ‘qemu_ram_free’:
exec.c:1239:17: warning:
 implicit declaration of function ‘munmap’ [-Wimplicit-function-declaration]
exec.c:1239:17: warning:
 nested extern declaration of ‘munmap’ [-Wnested-externs]
exec.c:1239: undefined reference to `munmap'

Add some ifdeffery again to fix this.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Report from clang analyzer:

clock.c:42:15: warning:
Value stored to 'cpu' during its initialization is never read
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

error: suggest parentheses around comparison in operand of ‘&’ [-Werror=parentheses]
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

When in Long Mode, cpu_x86_seg_cache() logs "DS16" because the Default
operation size bit (D/B bit) is not set for Long Mode Data Segments since
there are only Data Segments in Long Mode and no explicit 16/32/64-bit
Descriptors.
This patch fixes this by checking the Long Mode Active bit of the hidden
flags variable and logging "DS" if it is set. (I.e. in Long Mode all Data
Segments are logged as "DS")
Signed-off-by: NTobias Markus <tobias@markus-regensburg.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Event qxl_render_blit_guest_primary_initialized is unused since commit
c58c7b95, drop it.

Commit 42e5b4c9 moved hw/ppc/xics.c to hw/intc/xics.c without updating
the comment in trace-events.

"scripts/cleanup-trace-events.pl trace-events | diff trace-events" is
now clean again.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Debian busybox-static for alpha has a load address of 0x0000000120000000
which is mapped to 0x0000000020000000 for 32 bit hosts.

qemu-alpha uses the TCG opcodes qemu_ld32, qemu_ld64, qemu_st32 and
qemu_st64 which all raise the assertion (taddr == host_addr).

Remove all assertions of this type because they are either wrong or
unnecessary (when sizeof(tcg_target_ulong) >= sizeof(target_ulong)).

Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Add a missing "function" and replace "and" by "any".
BSD and Linux use the same documentation here, so fix both.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

tci.c is also a maintained part of the TCI implementation.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The page dump writes a table with 3 abi_ulong values in each row.
These values take 8 or 16 characters (depending on sizeof abi_ulong).

Fix the table headings to be aligned with the table columns.

old:
start    end      size     prot
0000000120000000-000000012021e000 000000000021e000 rwx
0000004000000000-0000004000002000 0000000000002000 ---
0000004000002000-0000004000802000 0000000000800000 rw-

new:
start            end              size             prot
0000000120000000-000000012021e000 000000000021e000 rwx
0000004000000000-0000004000002000 0000000000002000 ---
0000004000002000-0000004000802000 0000000000800000 rw-
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>