There is no reason why for example qemu-ga should include all the
definitions for the QEMU monitor.  However, there are a few
that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress,
ErrorClass_lookup).  These should be moved to a separate "core"
.json schema that goes into libqemuutil.a.

For now, make this clearer by moving the qapi-*.o definitions out
of libqemuutil.a.  Once the above refactoring is done, qga-obj-y
should not include anymore qapi-types.o and qapi-visit.o.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Split them between libqemuutil.a and, for those used by qemu-img/io/nbd,
block-obj-y.

Static libraries ensure that binaries such as qemu-ga do not include
unused modules.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use a static library to eliminate repetition in the linking rules.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This prepares the creation of libqemuutil.a in the next patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Helper function for dpa_w_ph, dpax_w_ph, dps_w_ph and dpsx_w_ph incorrectly
defines halfword vector elements as unsigned values. This results in wrong
output which is not triggered in the tests as they also follow this logic.
Signed-off-by: NPetar Jovanovic <petarj@mips.com>
Reviewed-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.

Test coverage will be reported after each test.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.
Signed-off-by: NPetar Jovanovic <petarj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.

The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.
Signed-off-by: NPetar Jovanovic <petarj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We need to eliminate calls to qemu_aio_flush() since the function is
being removed.  Most callers will use bdrv_drain_all() instead but
test-thread-pool.c is lower level.

Since the test uses the global AioContext we can loop on qemu_aio_wait()
to wait for aio and bh activity to complete.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There has been confusion between various aio wait and flush functions.
It's time to get rid of qemu_aio_flush() but in the aio test cases we
really do want this low-level functionality.

Therefore declare a local wait_for_aio() helper for the test cases.
Drop the aio_flush() test case.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

These spelling bugs were found by codespell:

supressing -> suppressing
transfered -> transferred
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

helper_shilo has not been shifting an accumulator value correctly for negative
values in 'shift' field. Minor optimization for shift=0 case.
This change also adds tests that will trigger issue and check for regressions.
Signed-off-by: NPetar Jovanovic <petarj@mips.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Content of register rs should be shifted for pos before applying a mask.
This change contains both fix for the instruction and to the existing test.
Signed-off-by: NPetar Jovanovic <petarj@mips.com>
Reviewed-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This bug occurs when the SET flag of Register B is enabled. When an RTC
data register (i.e. any of the ten time/calender CMOS bytes) is set, the
data is (as expected) correctly stored in the cmos_data array. However,
since the SET flag is enabled, the function rtc_set_time is not invoked.
As a result, the field base_rtc in RTCState remains uninitialized. This
causes a problem on subsequent writes which can end up overwriting data.
To see this, consider writing data to Register A after having written
data to any of the RTC data registers; the following figure illustrates
the call stack for the Register A write operation:

 +- cmos_io_port_write
 +-- check_update_timer
 +---- get_next_alarm
 +------ rtc_update_time

In rtc_update_time, get_guest_rtc calculates the wrong time and
overwrites the previously written RTC data register values.
Signed-off-by: NAlex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The cancellation test is failing on the buildbots.  While the failure
merits a little more investigation to understand what is going on,
the logs show that the failure is not impacting the coverage
provided by the test.  Hence, loosen a bit the assertions in a
way that should let the test proceed and hopefully pass.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

ST0 shouldn't include 0x20 (FD_SR0_SEEK) after READ ID.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Tested-by: NHervé Poussineau <hpoussin@reactos.org>

Do not always set FD_SR0_SEEK, as callers already set it if needed.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

A media will be required for future fdc tests.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: NNick Thomas <nick@bytemark.co.uk>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Actually writing all the content with 512 byte sector size would take
forever, therefore build the image file with a Python script and use
qemu-io for the last write that actually triggers the refcount table
growth.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>