Check the v8M stack limits when pushing the frame for a
non-secure function call via BLXNS.

In order to be able to generate the exception we need to
promote raise_exception() from being local to op_helper.c
so we can call it from helper.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-8-peter.maydell@linaro.org

Add checks for breaches of the v8M stack limit when the
stack pointer is decremented to push the exception frame
for exception entry.

Note that the exception-entry case is unique in that the
stack pointer is updated to be the limit value if the limit
is hit (per rule R_ZLZG).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-7-peter.maydell@linaro.org

Add some comments to the Thumb decoder indicating what bits
of the instruction have been decoded at various points in
the code.

This is not an exhaustive set of comments; we're gradually
adding comments as we work with particular bits of the code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-6-peter.maydell@linaro.org

Add code to insert calls to a helper function to do the stack
limit checking when we handle these forms of instruction
that write to SP:
 * ADD (SP plus immediate)
 * ADD (SP plus register)
 * SUB (SP minus immediate)
 * SUB (SP minus register)
 * MOV (register)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-5-peter.maydell@linaro.org

We're going to want v7m_using_psp() in op_helper.c in the
next patch, so move it from helper.c to internals.h.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-4-peter.maydell@linaro.org

Define EXCP_STKOF, and arrange for it to cause us to take
a UsageFault with CFSR.STKOF set.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-3-peter.maydell@linaro.org

The Arm v8M architecture includes hardware stack limit checking.
When certain instructions update the stack pointer, if the new
value of SP is below the limit set in the associated limit register
then an exception is taken. Add a TB flag that tracks whether
the limit-checking code needs to be emitted.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181002163556.10279-2-peter.maydell@linaro.org

There is quite a lot of code required to compute cpu_mem_index,
or even put together the full TCGMemOpIdx.  This can easily be
done at translation time.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-16-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This implements the feature for softmmu, and moves the
main loop out of a macro and into a function.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-15-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-14-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-13-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We can choose the endianness at translation time, rather than
re-computing it at execution time.
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-12-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We can choose the endianness at translation time, rather than
re-computing it at execution time.
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-11-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This fixes the endianness problem for softmmu, and moves the
main loop out of a macro and into an inlined function.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-10-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use the same *_tlb primitives as we use for ld1.

For linux-user, this hoists the set of helper_retaddr.  For softmmu,
hoists the computation of the current mmu_idx outside the loop,
fixes the endianness problem, and moves the main loop out of a
macro and into an inlined function.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-9-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Uses tlb_vaddr_to_host for correct operation with softmmu.
Optimize for accesses within a single page or pair of pages.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-8-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The 16-byte load only uses 16 predicate bits.  But while
reusing the other load infrastructure, we find other bits
that are set and trigger an assert.  To avoid this and
retain the assert, zero-extend the predicate that we pass
to the LD1 helper.
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Reported-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-7-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use the existing helpers to determine if (1) the fpu is enabled,
(2) sve state is enabled, and (3) the current sve vector length.
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-6-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

SVE vector length can change when changing EL, or when writing
to one of the ZCR_ELn registers.

For correctness, our implementation requires that predicate bits
that are inaccessible are never set.  Which means noticing length
changes and zeroing the appropriate register bits.
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-5-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We are going to want to determine whether sve is enabled
for EL other than current.
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-4-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Check for EL3 before testing CPTR_EL3.EZ.  Return 0 when the exception
should be routed via AdvSIMDFPAccessTrap.  Mirror the structure of
CheckSVEEnabled more closely.

Fixes: 5be5e8edReviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-3-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Given that the only field defined for this new register may only
be 0, we don't actually need to change anything except the name.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-2-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

A cut-and-paste error meant we were reading r4 from the v8M
callee-saves exception stack frame twice. This is harmless
since it just meant we did two memory accesses to the same
location, but it's unnecessary. Delete it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002150304.2287-1-peter.maydell@linaro.org

In v7m_exception_taken() we were incorrectly using a
"LR bit EXCRET.ES is 1" check when it should be 0
(compare the pseudocode ExceptionTaken() function).
This meant we didn't stack the callee-saved registers
when tailchaining from a NonSecure to a Secure exception.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20181002145940.30931-1-peter.maydell@linaro.org

In commit c79c0a31 we enabled emulation of external aborts
when the guest attempts to access a physical address with no
mapped device. In commit 4672cbd7 we suppress this for
most legacy boards to prevent breakage of previously working
guests, but we didn't suppress it in the 'virt' board, with
the rationale "we know that guests won't try to prod devices
that we don't describe in the device tree or ACPI tables". This
is mostly true, but we've had a report of a Linux guest image
that this did break. The problem seems to be that the guest
is (incorrectly) configured with a DEBUG_UART_PHYS value that
tells it there is a uart at 0x10009000 (which is true for
vexpress but not for virt), so in early bootup the kernel
probes this bogus address.

This is a misconfigured guest, so we don't need to worry
about it too much, but we can arrange that guests that ran
on QEMU v2.10 (before c79c0a31) will still run on
the "virt-2.10" board model, by suppressing external aborts
only for that version and earlier. This seems a reasonable
compromise: "virt-2.10" is supposed to behave the same way
that "virt" did in the 2.10 release, and making it do that
provides a usable workaround for guests with bugs like this.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180925144127.31965-1-peter.maydell@linaro.org
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

The parameter of kvm_arm_init_cpreg_list() is ARMCPU instead of
CPUState, so correct the note to make it match the code.
Signed-off-by: NDongjiu Geng <gengdongjiu@huawei.com>
Message-id: 1538069046-5757-1-git-send-email-gengdongjiu@huawei.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Testing infrastructure for softfpu (not run by default).
Drop countLeadingZeros.
Fix div_floats.
Add udiv_qrnnd specializations for x86_64, s390x, ppc64 hosts.

# gpg: Signature made Fri 05 Oct 2018 19:00:09 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-fpu-20181005:
  softfloat: Specialize udiv_qrnnd for ppc64
  softfloat: Specialize udiv_qrnnd for s390x
  softfloat: Specialize udiv_qrnnd for x86_64
  softfloat: Fix division
  softfloat: Replace countLeadingZeros32/64 with clz32/64
  tests/fp/fp-test: add floating point tests
  gitmodules: add berkeley's softfloat + testfloat version 3
  softfloat: remove float64_trunc_to_int
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

slirp updates

Andrew Oates (1):
  slirp: fix ICMP handling on macOS hosts

Gavin Grant (1):
  slirp: Propagate host TCP RST packet to the guest after socket
    disconnected

Peter Maydell (1):
  slirp: document mbuf pointers and sizes

# gpg: Signature made Sun 07 Oct 2018 19:04:13 BST
# gpg:                using RSA key E3F65A9E9560DB4C
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>"
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: 33FA 7B64 6195 01F8 CE9C  8F97 E3F6 5A9E 9560 DB4C

* remotes/thibault/tags/samuel-thibault:
  slirp: Propagate host TCP RST packet to the guest after socket disconnected
  slirp: fix ICMP handling on macOS hosts
  slirp: document mbuf pointers and sizes
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

CLI help improvements

PULLv2:
 - fix uninitialized "seentype" variable in qom-test

# gpg: Signature made Fri 05 Oct 2018 13:28:21 BST
# gpg:                using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/option-pull-request:
  vl: list user creatable properties when 'help' is argument
  hostmem: add some properties description
  vl: handle -object help
  tests/qom-proplist: check class properties iterator
  tests/qom-proplist: check properties are not listed multiple times
  tests/qom-proplist: check duplicate "bv" property registration failed
  qom/object: register 'type' property as class property
  qom/object: fix iterating properties over a class
  qemu-option: improve qemu_opts_print_help() output
  qemu-option: add help fallback to print the list of options
  cutils: add qemu_pstrcmp0()
  qdev-monitor: print help to stdout
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 27d92ebc handled the case where the TCP
connection is abruptly closed via a RST packet, by checking for the ECONNRESET
errno. However it does not consider the case where the connection has been
half-closed by the host (FIN/ACK), then the host socket is disconnected. For
example, if the host application calls close() on the socket, then the
application exits.

In this case, the socket still exists due to the file descriptor in SLIRP, but
it is disconnected. recv() does not indicate an error since an orderly socket
close has previously occurred. The socket will then be stuck in FIN_WAIT_2,
until the peer sends FIN/ACK or a timeout occurs. Instead we can send a RST
to the peer and transition to the CLOSED state.
Signed-off-by: NGavin Grant <gavingrant@protonmail.com>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

On Linux, SOCK_DGRAM+IPPROTO_ICMP sockets give only the ICMP packet when
read from.  On macOS, however, the socket acts like a SOCK_RAW socket
and includes the IP header as well.

This change strips the extra IP header from the received packet on macOS
before sending it to the guest.  SOCK_DGRAM ICMP sockets aren't
supported on other BSDs, but we enable this behavior for them as well to
treat the sockets the same as raw sockets.
Signed-off-by: NAndrew Oates <aoates@google.com>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

and fix confusing datasize name into gapsize in m_inc.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

The ISA has a 128/64-bit division instruction, though it assumes the
low 64-bits of the numerator are 0, and so requires a bit more fixup
than a full 128-bit division insn.
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The ISA has a 128/64-bit division instruction.
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The ISA has a 128/64-bit division instruction.
Tested-by: NEmilio G. Cota <cota@braap.org>
Tested-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The __udiv_qrnnd primitive that we nicked from gmp requires its
inputs to be normalized.  We were not doing that.  Because the
inputs are nearly normalized already, finishing that is trivial.

Replace div128to64 with a "proper" udiv_qrnnd, so that this
remains a reusable primitive.

Fixes: cf07323d
Fixes: https://bugs.launchpad.net/qemu/+bug/1793119Tested-by: NEmilio G. Cota <cota@braap.org>
Tested-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Our minimum required compiler for compiling QEMU is GCC 4.1 these days,
so we can drop the support for compilers which do not provide the
__builtin_clz*() functions yet. Since the countLeadingZeros32/64 are
then identical to the clz32/64 functions, and we do not have to sync
the softloat 2 codebase with upstream anymore (softloat 3 is a complete
rewrite) we can simply replace the functions with our QEMU versions.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1538118095-7003-1-git-send-email-thuth@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

By leveraging berkeley's softfloat and testfloat.

With this we get decent coverage of softfloat.c:

$ ./fp-test -r even:	67.22% coverage
$ ./fp-test -r all:	73.11% coverage

Note that we do not yet test parts of softfloat.c that aren't
in the original softfloat library, namely:

- denormal inputs
- *_to_int16/uint16 conversions
- scalbn for fixed point
- muladd variants
- min/max
- exp2
- log2
- float*_compare (except float16_compare)
Signed-off-by: NEmilio G. Cota <cota@braap.org>
[rth: Add the new modules to git_submodules.]
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

These are BSD-licensed so we can add them as submodules.
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

It has not had users since f83311e4 ("target-m68k: use floatx80
internally", 2017-06-21).

Note that no other bit-width has floatX_trunc_to_int.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>