Implement MIPS ll/sc instructions using atomic compare+exchange.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Implement cpu_set_tls for MIPS.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

The clone syscall takes 6 args.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* fix secondary bus setup.
 * use base->name instead of "FIXME" for device name.
   Yes, the device name is redundant.  Only for drivers converted
   to qdev already though.  Once all drivers are converted we can
   and should kill it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The only purpose DeviceType serves is creating a linked list of
DeviceInfo structs.  This removes DeviceType and add a next field to
DeviceInfo instead, so the DeviceInfo structs can be changed that way.
Elimitates a pointless extra level of indirection.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

BusInfo is filled with name and size (pretty much like I did for
DeviceInfo as well).  There is also a function pointer to print
bus-specific device information to the monitor.  sysbus is hooked
up there, I've also added a print function for PCI.

Device creation is slightly modified as well:  The device type search
loop now also checks the bus type while scanning the list instead of
complaining thereafter in case of a mismatch.  This effectively gives
each bus a private namespace for device names.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters.  Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

the qemu_malloc routines

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

For Sparc64, this fixes the PCI bridge configuration bugs revealed by the
improved bridge handling (b7ee1603).
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

MADD was not correctly writing to HI.

MSUB/MSUBU are specified as `HI||LO - product', not `product - HI||LO'.
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When converting from hx to texi format, hxtool (or to be
more precise sh which interprets hxtool) used standard
shell expansion of wildcards while writing lines to the
output.

Thus, something like "Password: ********"
looked very different in the generated documentation.

The patch disables this unwanted wildcard expansion.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>

Not all host platforms support ffsll.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix missing strnlen (a GNU extension) problems by using qemu_strnlen
used for user emulators also for system emulators.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Revert rules.mak changes from aba800a3.  These should not have been here
to start with.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

We want to do (at least) two things to the virtio-balloon device:
suppress it, and control its PCI address.  Option -no-virtio-balloon
lets us do only the former.  To get the latter, replace
-no-virtio-balloon with

    -balloon none   disable balloon device
    -balloon virtio[,addr=str]
                    enable virtio balloon device (default)

Syntax suggested by Anthony Liguori.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

[ Applies on top of my recently posted slirp series. ]

Allow tftp requests with filenames that do not start with a slash.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Valgrind was so kind to remark that no one bothers to release keycodes
after use and that something is fishy about cleaning up the requested
keyboard descriptor. With this patch applied, we no longer leak about
12k during startup.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch aligns the KVM-related layout and encoding of the CPU state
to be saved to disk or migrated with qemu-kvm. The major differences are
reordering of fields and a compressed interrupt_bitmap into a single
number as there can be no more than one pending IRQ at a time.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

At this point, this refactoring looks like overkill. But we will need it
for CPU hotplugging, and qemu-kvm already carries it. Merging it early
would help qemu-kvm when rebasing against upstream.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Refactor the ACL monitor interface to make full use of the monitor
command dispatcher. This also gives proper help formatting and command
completion. Note that 'acl allow' and 'acl deny' were combined to
'acl_add aclname match allow|deny [index]' for consistency reasons.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 8217606e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

During startup and after reset we have to synchronize user space to the
in-kernel KVM state. Namely, we need to transfer the VCPU registers when
they change due to VCPU as well as APIC reset.

This patch refactors the required hooks so that kvm_init_vcpu registers
its own per-VCPU reset handler and adds a cpu_synchronize_state to the
APIC reset. That way we no longer depend on the new reset order (and can
drop this disliked interface again) and we can even drop a KVM hook in
main().
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The "pci_addr=" prefix currently required by pci_add/remove and
drive_add has no practical use. Drop it, but still silently accept it
for backward compatibility.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The really time consuming part of snapshotting is to adjust the reference count
of all clusters. Currently after each adjusted cluster the refcount block is
written to disk.

Don't write each single byte immediately to disk but cache all writes to the
refcount block and write them out once we're done with the block.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>