- 15 2月, 2014 6 次提交
-
-
由 Benoît Canet 提交于
As bdrv_open() documentation states: "The reference to the QDict belongs to the block layer * after the call (even on failure), so if the caller intends to reuse the * dictionary, it needs to use QINCREF() before calling bdrv_open." the optional options dict will not be reused after bdrv_open() and should belong to the block layer so remove the extra QDECREF(options). Signed-off-by: NBenoit Canet <benoit@irqsave.net> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
When starting a block job, commit_active_start() relies on whether *errp is set by mirror_start_job. This allows it to determine if the mirror job start failed, so that it can clean up any changes to open flags from the bdrv_reopen(). If errp is NULL, then it will not be able to determine if mirror_start_job failed or not. To avoid this, use a local Error variable, and then propagate the error (if any) to errp. Reported-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
There would be too many extents that VMDK driver can't open all of them: 005 0s ... - output mismatch (see 005.out.bad) --- 005.out 2013-12-24 09:27:27.608181030 +0800 +++ 005.out.bad 2014-02-13 10:00:15.282184557 +0800 @@ -4,10 +4,10 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=5368709120000 small read -read 4096/4096 bytes at offset 1024 -4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files +no file open, try 'help open' small write -wrote 4096/4096 bytes at offset 8192 -4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files +no file open, try 'help open' *** done So disable the two subformats. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
VHDX logs can now be replayed via 'qemu-img check -r all'. Add tests to verify that the log replay is successful when using qemu-img. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
VHDX test 070 failed, due to different output from qemu-io / qemu when opening an image read-only that contains a log file. Filter the output, and update the expected results to match the correct output. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
There are a handful of places in the block layer where a failure path has a valid -errno value, yet error_setg() is used. Those instances should instead use error_setg_errno(), to preserve as much error information as possible. This patch replaces those instances with error_setg_errno(), so that errno is passed up the stack in the error message. Reported-By: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 14 2月, 2014 3 次提交
-
-
由 Jeff Cody 提交于
iSCSI currently does not need to do any actions to support the current usage of bdrv_reopen(). However, it is important to note a couple of things: 1.) A connection will not be re-established to an iSCSI target, and 2.) If iscsi_open() is changed to parse 'flags', then iscsi_reopen_prepare() may need to be more than a stub. In light of the above, this commit adds comments above both of the functions to bring attention to these facts. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
blockdev-add doesn't know about the device that the backend will be attached to, this is a legacy -drive concept. Move the remaining checks that use it to drive_init(). [Fam Zheng <famz@redhat.com> suggested line-wrapping to 80 chars as required by the coding standard. I have fixed this. --Stefan] Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 13 2月, 2014 4 次提交
-
-
由 Peter Maydell 提交于
acpi,pc,pci fixes and enhancements Most changes here are hotplug related: This merges hotplug infrastructure changes by Igor, some acpi related fixes, and PC fixes. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: ACPI: Remove commented-out code from HPET._CRS hw/pci: switch to a generic hotplug handling for PCIDevice pci/pcie: convert PCIE hotplug to use hotplug-handler API pci/shpc: convert SHPC hotplug to use hotplug-handler API acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API qdev:pci: refactor PCIDevice to use generic "hotpluggable" property hw/acpi: move typeinfo to the file end qdev: add "hotpluggable" property to Device qdev: add to BusState "hotplug-handler" link define hotplug interface loader: document that errno is set pc.c: better error message on initrd sizing failure pc_piix: enable legacy hotplug for Xen qtest: don't report signals if qtest driver enabled hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug pcihp: remove unused AcpiPciHpPciStatus.device_present field pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR pcihp: replace enable|disable_device() with oneliners pcihp: reduce number of device check events Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
PReP machine and devices * Cleanups for Raven PCI host bridge * Removal of PReP machine and devices from qemu-system-ppcemb # gpg: Signature made Mon 10 Feb 2014 16:19:03 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/prep-for-upstream: prep: Drop from ppcemb-softmmu raven: Use constant PCI_NUM_PINS instead of 4 prep: Kill get_system_io() usage Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/alon/pull-libcacard.glusterfs: libcacard: Don't link with all libraries QEMU links to Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Block patches # gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-anthony: block: Fix 32 bit truncation in mark_request_serialising() blkdebug: Don't leak bs->file on failure block: Don't call ROUND_UP with negative values block: bdrv_aligned_pwritev: Assert overlap range block: Fix memory leaks in bdrv_co_do_pwritev() raw: Fix BlockLimits passthrough qemu-iotests: add test for qcow2 preallocation with different cluster sizes qcow2: check for NULL l2meta qcow2: fix offset overflow in qcow2_alloc_clusters_at() qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset() block/iscsi: always fill bs->bl.opt_transfer_length block: Fail gracefully with missing filename qemu-iotests: enable support for NFS protocol qemu-iotests: enable test 016 and 025 to work with NFS protocol qemu-iotests: blacklist test 020 for NFS protocol qemu-iotests: change _supported_proto to file for various tests block: add native support for NFS qemu-iotest: Make 077 raw-only Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 11 2月, 2014 22 次提交
-
-
由 Edgar E. Iglesias 提交于
This is to allow future patches to set properties before cpu::realize(). Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
No functional change. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Peter Maydell 提交于
target-arm queue: * more A64 Neon instructions * AArch32 VCVTB and VCVTT ARMv8 instructions * fixes to inaccuracies in GIC emulation * libvixl disassembler for A64 * Allwinner SoC ethernet controller * zynq software system reset support # gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits) arm/zynq: Add software system reset via SCLR hw/arm/allwinner-a10: initialize EMAC hw/net: add support for Allwinner EMAC Fast Ethernet controller util/fifo8: clear fifo head upon reset util/fifo8: implement push/pop of multiple bytes disas: Implement disassembly output for A64 disas/libvixl: Fix upstream libvixl compilation issues disas: Add subset of libvixl sources for A64 disassembler rules.mak: Link with C++ if we have a C++ compiler rules.mak: Support .cc as a C++ source file suffix arm_gic: Add GICC_APRn state to the GICState vmstate: Add uint32 2D-array support arm_gic: Support setting/getting binary point reg arm_gic: Keep track of SGI sources arm_gic: Fix GIC pending behavior target-arm: Add support for AArch32 64bit VCVTB and VCVTT target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group target-arm: A64: Add 2-reg-misc REV* instructions target-arm: A64: Add narrowing 2-reg-misc instructions target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/kvaneesh/for-upstream: hw/9pfs: fix P9_STATS_GEN handling hw/9pfs: make get_st_gen() return ENOTTY error on special files hw/9pfs: handle undefined FS_IOC_GETVERSION case in handle_ioc_getversion() hw/9pfs: fix error handing in local_ioc_getversion() Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Paolo Bonzini 提交于
Commit 360e607b (address_space_translate: do not cross page boundaries, 2014-01-30) broke MMIO accesses in cases where the section is shorter than the full register width. This can happen for example with the Bochs DISPI registers, which are 16 bits wide but have only a 1-byte long MemoryRegion (if you write to the "second byte" of the register your access is discarded; it doesn't write only to half of the register). Restrict the action of commit 360e607b to direct RAM accesses. This is enough for Xen, since MMIO will not go through the mapcache. Reported-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Andreas Färber 提交于
ppcemb covers only embedded processors, which does not include PReP. Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
-
- 10 2月, 2014 5 次提交
-
-
由 Gabriel L. Somlo 提交于
IRQNoFlags on HPET._CRS crashes WinXP because it causes the HPET to conflict with the system timer and/or the RTC. It only occurs on Apple hardware, and even there it is exposed fully only when OS X is detected (via _OSI). Recent OS X versions work on QEMU without this statement, so at this time there is no need to find a better way to conditionally include the statement. This patch removes the commented out (and wrong, should have been {0, 8}) statement from HPET._CRS. Signed-off-by: NGabriel Somlo <somlo@cmu.edu> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-By: NIgor Mammedov <imammedo@redhat.com>
-
由 Igor Mammedov 提交于
make qdev_unplug()/device_set_realized() to call hotplug handler's plug/unplug methods if available and remove not needed anymore hot(un)plug handling from PCIDevice. In case if hotplug handler is not available, revert to the legacy hotplug method for compatibility with not yet converted buses. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCIE_SLOT device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split shpc_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCI_BRIDGE_DEV device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-