I noticed that pcnet_common_init() takes an unused 'info_str'
parameter, added in r2142.  Since then, we always pass "pcnet"
to register_savevm() (and never "lance").

Note that r6218 changed vc->info_str to "lance" for sun4m emulation.

On the assumption that it's not needed, this patch removes the
parameter.  If reverting the change in r2142, and registering with
"lance" would be preferable, I can submit a patch to do so.
Signed-off-by: NStuart Brady <stuart.brady@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6362 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6361 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6360 c046a42c-6fe2-441c-8c8c-71466251a162

Currently qemu_mallocz calls malloc and handling of zero by malloc is
implementation defined behaviour:
http://www.opengroup.org/onlinepubs/7990989775/xsh/malloc.html

malloc(0) on AIX returns NULL[1] and qcow2 images without snapshots
are thus unusable

[1] Unless special Linux compatibility define is used when compiling

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6359 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6358 c046a42c-6fe2-441c-8c8c-71466251a162

I discovered a bug in the hpet code that caused Windows to boot without
hpet. The config mask I was using was preventing the guest from placing
the hpet into 32 bit mode.

(Beth Kon)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6357 c046a42c-6fe2-441c-8c8c-71466251a162

This patch improves G364 video card emulation (used in MIPS Magnum machine):
- Use memory dirty tracking to not refresh whole screen each time
- Use macros for debugging messages
- Add support for hardware cursor
- Handle Y-panning
- Raise irq at each screen redraw
- Support retrieving of some registers
- Add load/save support

The emulation has been tested in Linux 2.1 and Windows NT 3.5, in
640x480, 800x600, 1024x768 and 1280x1024 resolutions.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6356 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6355 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6354 c046a42c-6fe2-441c-8c8c-71466251a162

This fixes a fault with the jazz_led since it has two graphic consoles.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6353 c046a42c-6fe2-441c-8c8c-71466251a162

The DisplayState refactoring changed the machine init function to create a
DisplayState for each VGA device instead of being passed an existing
DisplayState.  This change is critical to enable multiple graphics device
support.

Unfortunately, the serial/parallel/console code is structured today to run
before machine init to fill out the CharDriverState table which the machine
init function uses to determine whether to create the required devices.

Since a 'vc' is a type of CharDriverState, the CharDriverState code requires
that a DisplayState exist before it runs creating a circular dependency.

To fix this, this splits the creation of the initial CharDriverState from
the initialization of the text console.  We can then in a second step associate
a DisplayState with all TextConsoles.  This allows us to create the
CharDriverState's first, machine init, then associate the TextConsoles with
a DisplayState.

This code screams for more cleanup.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6352 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6351 c046a42c-6fe2-441c-8c8c-71466251a162

ppm_save's signature changed so it needs updating.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6350 c046a42c-6fe2-441c-8c8c-71466251a162

Fix crash introduced in revision 6336.

(Stefano Stabellini)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6349 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6348 c046a42c-6fe2-441c-8c8c-71466251a162

This is specific to OpenHackware, and not used by OpenBIOS.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6347 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6346 c046a42c-6fe2-441c-8c8c-71466251a162

this patch fixes the screendump functionality that was recently broken;
it must be applied *after* PATCH 5, 6 and 7 of the original displaystate
change patch series.
In fact the other patches make much easier to solve the screendump
problem because they make the console switching mechanism more robust.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6345 c046a42c-6fe2-441c-8c8c-71466251a162

Patch 5/7

This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.

This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.

This patch does *not* include any required changes to any device, these
changes come with the following patches.

Patch 6/7

This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;

In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.

Patch 7/7

This patch updates the graphic device code to use the new
graphical_console_init function.

As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6343 c046a42c-6fe2-441c-8c8c-71466251a162

r6322 introduced a warning pointed out by Jan Kiszka.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6342 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6341 c046a42c-6fe2-441c-8c8c-71466251a162

These are references to 'loglevel' that aren't on a simple 'if (loglevel &
X) qemu_log()' statement.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6339 c046a42c-6fe2-441c-8c8c-71466251a162

This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162

This patch exploits the new DisplaySurface and PixelFormat structures in
vnc, making the code easier to read allowing further improvements.

Compared to the last version I fixed a bug that prevented the hextile
encoding from working properly.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6337 c046a42c-6fe2-441c-8c8c-71466251a162

This patch changes the DisplayState interface adding support for
multiple frontends at the same time (sdl and vnc) and implements most
of the benefit of the shared_buf patch without the added complexity.

Currently DisplayState is managed by sdl (or vnc) and sdl (or vnc) is
also responsible for allocating the data and setting the depth.
Vga.c (or another backend) will do any necessary conversion.

The idea is to change it so that is vga.c (or another backend) together
with console.c that fully manage the DisplayState interface allocating
data and setting the depth (either 16 or 32 bit, if the guest uses a
different resolution or is in text mode, vga.c (or another backend) is
in charge of doing the conversion seamlessly).

The other idea is that DisplayState supports *multiple* frontends
like sdl and vnc; each of them can register some callbacks to be called
when a display event occurs.

The interesting changes are:

- the new structures and related functions in console.h and console.c

in particular the following functions are very helpful to manage a
DisplaySurface:

qemu_create_displaysurface
qemu_resize_displaysurface
qemu_create_displaysurface_from
qemu_free_displaysurface

- console_select and qemu_console_resize in console.c
this two functions manage multiple consoles on a single host display

- moving code around in hw/vga.c
as for the shared_buf patch this is necessary to be able to handle a dynamic
DisplaySurface bpp

- changes to vga_draw_graphic in hw/vga.c
this is the place where the DisplaySurface buffer is shared with the
videoram, when possible;


Compared to the last version the only changes are:

- do not remove support to dpy_copy in cirrus_vga
- change the name of the displaysurface handling functions
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6336 c046a42c-6fe2-441c-8c8c-71466251a162

Do not handle bgr host displays in the backends.

Right now a bgr flag exists so that sdl can set it, if the SDL_Surface
is bgr.
Afterwards the graphic device (e.g. vga.c) does the needed conversion.

With this patch series is sdl that is responsible for rendering the format
provided by the graphic device that must provide a DisplaySurface
(ds->surface) in 16 or 32 bpp, rgb.
Afterwards sdl creates a SDL_Surface from the given DisplaySurface and
blits it into the main SDL_Surface using SDL_BlitSurface.

Everything is handled by sdl transparently, because SDL_BlitSurface is
perfectly capable of handling bgr displays by itself.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6335 c046a42c-6fe2-441c-8c8c-71466251a162

The patch applies to upstream qemu as well as kvm-userspace, but since it is
the qemu configure script I think it should go to upstream qemu (Anthony)
first and with the next merge to kvm-userspace. On the other hand it is the kvm
probe so an ack from Avi in case v3 is ok would be reasonable.

*updates*
v2 - it also reports other errors than just #error preprocessor statements
     (requested by Avi)
v3 - In case awk or grep is not installed it now gracfully (silently)
     fails still disabling kvm (requested by Anthony)

This patch is about reporting more details of the issue if configuring kvm
fails. Therefore this patch keeps the qemu style configure output which is a
list of "$Feature $Status", but extend the "no" result like "KVM Support no"
with some more information.

There might be a lot of things going wrong with that probe and I don't want
to handle all of them, but if it is one of the known checks e.g. for
KVM_API_VERSION then we could grep/awk that out and report it. The patch
reports in case of a known case in the style
"KVM support no - (Missing KVM capability KVM_CAP_DESTROY_MEMORY_REGION_WORKS)"

In case more than one #error is triggered it creates a comma separated list in
those brackets and in case it is something else than an #error it just reports
plain old "no".
Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6334 c046a42c-6fe2-441c-8c8c-71466251a162

These macros are NOT a proposal for a definitive new logging API. They
are just a step for it: a way to mark all usage patterns of the
logfile/loglevel variables on a single place.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6333 c046a42c-6fe2-441c-8c8c-71466251a162

Use macros to avoid #ifdefs on debugging code.

This patch doesn't try to merge logging macros from different files,
but just unify the debugging code #ifdefs onto a macro on each file. A
further cleanup can unify the debugging macros on a common header, later
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6332 c046a42c-6fe2-441c-8c8c-71466251a162

getopt doesn't return a char but an int.
Signed-off-by: NKevin Wolf <kwolf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6331 c046a42c-6fe2-441c-8c8c-71466251a162

r6303 broke Windows build, where "noreturn" is a keyword used with __declspec.
Attached patch fixes Windows build, by moving windows.h header inclusion before Qemu noreturn define.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> 
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6330 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6329 c046a42c-6fe2-441c-8c8c-71466251a162

An external interrupt should not interrupted in-servicing interrupt with equal priority.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6328 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6327 c046a42c-6fe2-441c-8c8c-71466251a162

QEMU uses "ppc" whereas Linux uses "powerpc".
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6326 c046a42c-6fe2-441c-8c8c-71466251a162

If a X window is not viewable, XGrabPointer() fails and
returns GrabNotViewable. SDL's X backend currently handles
this by retrying the grab until the window becomes viewable
again.

This means e.g. if you Ctrl-Alt-RightArrow to switch
workspaces, QEMU tries to grab, SDL blocks because the
window isn't viewable and your guest stops executing until
you switch back to that workspace again.

See this Fedora bug for the gory details:

  https://bugzilla.redhat.com/480065

Some SDL backends will return SDL_GRAB_OFF from
SDL_WM_GrabInput(), so the fix is to make the X backend do
this if the grab fails.

The only side-effect in QEMU is that if SDL_WM_GrabInput()
fails we still change the window title to indicate that it's
grabbed, when in fact it's not. This patch fixes that minor
issue.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6325 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6324 c046a42c-6fe2-441c-8c8c-71466251a162

Should return real error instead.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6323 c046a42c-6fe2-441c-8c8c-71466251a162