- 12 12月, 2009 40 次提交
-
-
由 Luiz Capitulino 提交于
While there update the documentation as well. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Should return a QDict and should not print the user protocol bits (eg. "c|cont"). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Monitor commands should always return values in bytes and info commands should always return a QDict. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
A helper function to get a QList from a QDict. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This is a helper function that does type checking before retrieving a QBool from the dictionary. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Other subsystems will need to link against them. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
An easy way to include all QEMU objects. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
The capslock tracking logic added by commit 6b132502 doesn't work correctly for vnc clients without EXT_KEY_EVENT support. The reason is that qemu converts keysyms for letters to lowercase for the keysym2scancode lookup. It then also passes the lowercase value down to do_key_event(), but the capslock tracking code needs it with the correct case to work properly. This patch adds a new variable for the lowercase keysym so we'll keep the unmodified value for do_key_event(). The keysym2scancode is not needed with EXT_KEY_EVENT capable clients like any app based on the gtk-vnc widget, so I missed that case in testing ... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Use case: loooooooooooooooooong file names for -drive file=... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch fills the DriveInfo->unit after hotplugging a scsi disk. It makes a difference when auto-assigning a scsi id, where unit was left filled with '-1' instead of the actual scsi id. With this patch applied the the drive naming logic in drive_init() works as good as it did in previous releases. Which means it works fine with a single scsi bus. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Current PCI code will simply hw_error() and thus abort in case no free PCI slot is available or the requested PCI slot is already in use by another device. For the hotplug case this behavior is not acceptable. This patch makes qemu pass up the error properly, so the calling code can decide whenever it wants to exit with an error (on startup) or whenever it wants to continue (hotplug). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
The PCI bus on x86 requires ACPI for hotplug support, thus disbling ACPI also disables hotplug for the PCI bus. This patch makes qemu check whenever the PCI bus in question can handle hotplug before trying to add devices. This is needed because qdev will abort() on any attempt to hotplug devices into a non-hotpluggable bus. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
All "normal" system emulation targets in qemu I'm aware of display output on either VGA or serial output. Our S390x virtio machine doesn't have such kind of legacy hardware. So instead we need to default to a virtio console. Add flags to QEMUMachine to indicate which kind of default devices make sense for the machine in question. Use it for S390x: enable virtcon, disable serial, parallel and vga. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds a variable default_virtcon which says whenever a default virtio console should be added. It is disabled by default, followup patch will enable it for s390. It is cleared when qemu finds '-virtiocon', '-device virtio-console-s390' or '-device virtio-console-pci' on the command line. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Acts like -monitor but switched into qmp mode. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add -mon switch which maps pretty straight forward into the QemuOpts internal representation: -mon chardev=<name>[,mode=[control|readline]][,[no]default] Via config file: [mon] chardev = "<name>" mode = "readline" default = "on" Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch reworks the -monitor handling: - It adds a new "mon" QemuOpts list for the monitor(s). - It adds a monitor_parse() function to parse the -monitor switch. - It adds a mon_init function to initialize the monitor(s) from the "mon" QemuOpts list. - It winds up everything and removes the old bits. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add a default_drive variable which specified whenever the default drives (cdrom, floppy, sd) should be created. It is cleared when the new -nodefaults switch is specified on the command line. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add a default_net variable which specified whenever a default network should be created. It is cleared in case any -net option is specified and it is also added to the new -nodefaults switch. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add global command line option to disable default devices. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Qemu creates a vga display for you in case you didn't specify one on the command line. Right now this is tied to the '-vga <type>' command line switch, which in turn causes trouble if you are creating your gfx card using '-device VGA,<props>'. This patch adds a variable default_vga which says whenever a default serial line should be added. It is enabled by default. It is cleared when qemu finds '-vga' or '-device {VGA,Cirrus VGA,QEMUware SVGA}' on the command line. '-device VGA' still doesn't work though due to a initialization order issue (vga must init before calling i440fx_init_memory_mappings). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
The logic in this code obviously predates the multiple monitor capability of qemu and looks increasingly silly these days. I think the intention of this piece of code is to get a reasonable default for the -nographic case: have monitor and serial line muxed on stdio. With the new default_serial and default_monitor variables we have now doing just that became much easier ;) Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch makes the monitor default device configuration work like the default serial and parallel port devices. It adds a variable default_monitor which says whenever a default monitor should be added. It is enabled by default. It is cleared when qemu finds '-monitor' on the command line. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Qemu creates a default parallel port for you in case you didn't specify one on the command line. Right now this is tied to the '-parallel <chardev>' command line switch, which in turn causes trouble if you are creating your parallel port via '-device isa-parallel,<props>'. This patch adds a variable default_parallel which says whenever a default parallel port should be added. It is enabled by default. It is cleared when qemu finds '-parallel' or '-device isa-parallel' on the command line. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Qemu creates a default serial line for you in case you didn't specify one on the command line. Right now this is tied to the '-serial <chardev>' command line switch, which in turn causes trouble if you are creating your serial line via '-device isa-serial,<props>'. This patch adds a variable default_serial which says whenever a default serial line should be added. It is enabled by default. It is cleared when qemu finds '-serial' or '-device isa-serial' on the command line. Part of the patch is some infrastructure for the '-device $driver' checking (default_driver_check function) which will also be used by the other patches of this series. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Make the 'vc' chardev backend print a title line with the chardev name after initialization, using CharDriverState->label. This replaces the banner printing code in vl.c. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This reverts commit 93d434b4. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This reverts commit adcb181a. Conflicts: monitor.h Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
The patch decuples the -chardev switch and the actual chardev initialization. Without this patch qemu ignores chardev entries coming via -readconfig. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
i.e. -global PCI.<property>=<value> will set a default property for all PCI devices. Also works for the compat properties used by machine types. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds infrastructure and command line option for setting global defaults for device properties, i.e. you can for example use -global virtio-blk-pci.vectors=0 to turn off msi by default for all virtio block devices. The config file syntax is: [global] driver = "virtio-blk-pci" property = "vectors" value = "0" This can also be used to set properties for devices which are not created via -device but implicitly via machine init, i.e. -global isa-fdc,driveA=<name> This patch uses the mechanism which configures properties for the compatibility machine types (pc-0.10 & friends). The command line takes precedence over the machine type values. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch renames the compat properties into global properties and makes them more generic. The compatibility stuff is only one of multiple possible users now. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
As KVM now makes use of exception_index to keep pending exceptions, we have to save&restore this field as well. NOTE: We have to nail the arch-independent exception_index down to a certain bit width for proper vmstate processing, namely to 32 bit. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Commits c7c338c4, 41471a23, 7a046f5f and a488be27 used lower_case_with_underscores for class values. Existing usage CamelCase. ChangeToThatForConsistency. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
It's not a device name, it's the USB product description string. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gleb Natapov 提交于
On hosts without high-res timers it is impossible to inject rtc interrupt faster then 1kHz. Windows sometimes configures RTC to generate 1kHz interrupts, so we can't inject missed interrupts when running on such hosts. Always injecting an interrupt on REG_C read is also not an option since Windows wait for REG_C to become zero with interrupt disabled during boot. This patch uses mixed approach: accelerate timer + inject up to 1000 interrupts on REG_C read. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-