My pattern was cyclical every 256 bytes, so it missed a fairly obvious
failure case. Add some rand() pepper into the test pattern, and for large
patterns that exceed 256 sectors, start writing an ID per-sector so that
we never generate identical sector patterns.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-5-git-send-email-jsnow@redhat.com

This does not bother DMA, because DMA generally transfers
the entire SGList in one shot if it can.

PIO, on the other hand, tries to transfer just one sector
at a time, and will make multiple visits to the sglist
to fetch memory addresses.

Fix the memory address calculaton when we have an offset
by moving the offset addition OUTSIDE of the le64_to_cpu
calculation.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-4-git-send-email-jsnow@redhat.com

Similar to the cmd_write_pio fix, update the nsector count and
ide sector before we invoke ide_transfer_start.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-3-git-send-email-jsnow@redhat.com

We need to adjust the sector being written to
prior to calling ide_transfer_start, otherwise
we'll write to the same sector again.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-2-git-send-email-jsnow@redhat.com

X86 queue 2015-03-19

# gpg: Signature made Thu Mar 19 19:40:17 2015 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: Haswell-noTSX and Broadwell-noTSX
  Revert "target-i386: Disable HLE and RTM on Haswell & Broadwell"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/work/numa-verify-cpus-pull-request' into staging

NUMA queue 2015-03-19

# gpg: Signature made Thu Mar 19 19:25:53 2015 GMT using RSA key ID 984DC5A6
# gpg: Can't check signature: public key not found

* remotes/ehabkost/tags/work/numa-verify-cpus-pull-request:
  numa: Print warning if no node is assigned to a CPU
  pc: fix default VCPU to NUMA node mapping
  numa: introduce machine callback for VCPU to node mapping
  numa: Reject configuration if CPU appears on multiple nodes
  numa: Reject CPU indexes > max_cpus
  numa: Fix off-by-one error at MAX_CPUMASK_BITS check
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: bugfix collection.

# gpg: Signature made Fri Mar 20 07:51:19 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20150320-1:
  ehci: fix segfault when hot-unplugging ehci controller
  ohci: fix resource cleanup leak
  uhci: fix segfault when hot-unplugging uhci controller
  hw/usb: Include USB files only if necessary
  usb/dev-storage: Avoid qerror_report_err() outside QMP handlers
  usb/dev-storage: Fix QMP device_add missing encryption key failure
  monitor usb: Inline monitor_read_bdrv_key_start()'s first part
  monitor: Plug memory leak in monitor_read_bdrv_key_start()
  monitor: Drop dead QMP check from monitor_read_password()
  uhci: Convert to realize
  ohci: Complete conversion to realize
  usb: Improve companion configuration error messages
  usb: Propagate errors through usb_register_companion()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.

Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.

Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: NLidonglin <lidonglin@huawei.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.

Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.

Ohci does't support hotplugging/hotunplugging yet, but
existing resource cleanup leak logic likes ehci/uhci.

Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.

Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.

Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: NLidonglin <lidonglin@huawei.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

With the Intel microcode update that removed HLE and RTM, there will be
different kinds of Haswell and Broadwell CPUs out there: some that still
have the HLE and RTM features, and some that don't have the HLE and RTM
features. On both cases people may be willing to use the pc-*-2.3
machine-types.

So, to cover both cases, introduce Haswell-noTSX and Broadwell-noTSX CPU
models, for hosts that have Haswell and Broadwell CPUs without TSX support.
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

This reverts commit 13704e4c.

With the Intel microcode update that removed HLE and RTM, there will be
different kinds of Haswell and Broadwell CPUs out there: some that still
have the HLE and RTM features, and some that don't have the HLE and RTM
features. On both cases people may be willing to use the pc-*-2.3
machine-types.

So instead of making the CPU model results confusing by making it depend
on the machine-type, keep HLE and RTM on the existing Haswell and
Broadwell CPU models. The plan is to introduce "Haswell-noTSX" and
"Broadwell-noTSX" CPU models later, for people who have CPUs that don't
have TSX feature available.
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

We need all possible CPUs (including hotplug ones) to be present in the
SRAT when QEMU starts. QEMU already does that correctly today, the only
problem is that when a CPU is omitted from the NUMA configuration, it is
silently assigned to node 0.

Check if all CPUs up to max_cpus are present in the NUMA configuration
and warn about missing CPUs.

Make it just a warning, to allow management software to be updated if
necessary. In the future we may make it a fatal error instead.

Command-line examples:

* Correct, no warning:

  $ qemu-system-x86_64 -smp 2,maxcpus=4
  $ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0-3

* Incomplete, with warnings:

  $ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0
  qemu-system-x86_64: warning: CPU(s) not present in any NUMA nodes: 1 2 3
  qemu-system-x86_64: warning: All CPU(s) up to maxcpus should be described in NUMA config

  $ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0-2
  qemu-system-x86_64: warning: CPU(s) not present in any NUMA nodes: 3
  qemu-system-x86_64: warning: All CPU(s) up to maxcpus should be described in NUMA config
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
---
v1 -> v2: (no changes)

v2 -> v3:
 * Use enumerate_cpus() and error_report() for error message
 * Simplify logic using bitmap_full()

v3 -> v4:
 * Clarify error message, mention that all CPUs up to
   maxcpus need to be described in NUMA config

v4 -> v5:
 * Commit log update, to make problem description clearer

Since commit
   dd0247e0 pc: acpi: mark all possible CPUs as enabled in SRAT
Linux kernel actually tries to use CPU to Node mapping from
QEMU provided SRAT table instead of discarding it, and that
in some cases breaks build_sched_domains() which expects
sane mapping where cores/threads belonging to the same socket
are on the same NUMA node.

With current default round-robin mapping of VCPUs to nodes
guest ends-up with cores/threads belonging to the same socket
being on different NUMA nodes.

For example with following CLI:

   qemu-system-x86_64 -m 4G \
         -cpu Opteron_G3,vendor=AuthenticAMD \
         -smp 5,sockets=1,cores=4,threads=1,maxcpus=8 \
         -numa node,nodeid=0 -numa node,nodeid=1

2.6.32 based kernels will hang on boot due to incorrectly built
sched_group-s list in update_sd_lb_stats()

Replacing default mapping with a manual, where VCPUs belonging to
the same socket are on the same NUMA node, fixes the issue for
guests which can't handle nonsense topology i.e. changing CLI to:
  -numa node,nodeid=0,cpus=0-3 -numa node,nodeid=1,cpus=4-7

So instead of simply scattering VCPUs around nodes, provide
callback to map the same socket VCPUs to the same NUMA node,
which is what guests would expect from a sane hardware/BIOS.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Current default round-robin way of distributing VCPUs among
NUMA nodes might be wrong in case on multi-core/threads
CPUs. Making guests confused wrt topology where cores from
the same socket are on different nodes.

Allow a machine to override default mapping by providing
 MachineClass::cpu_index_to_socket_id()
callback which would allow it group VCPUs from a socket
on the same NUMA node.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Each CPU can appear in only one NUMA node on the NUMA config. Reject
configuration if a CPU appears in multiple nodes.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

CPU index is always less than max_cpus, as documented at sysemu.h:

> The following shall be true for all CPUs:
>   cpu->cpu_index < max_cpus <= MAX_CPUMASK_BITS

Reject configuration which uses invalid CPU indexes.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Fix the CPU index check to ensure we don't go beyond the size of the
node_cpu bitmap.

CPU index is always less than MAX_CPUMASK_BITS, as documented at
sysemu.h:

> The following shall be true for all CPUs:
>   cpu->cpu_index < max_cpus <= MAX_CPUMASK_BITS
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Block patches for 2.3.0-rc1

# gpg: Signature made Thu Mar 19 15:03:26 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  block: Fix blockdev-backup not to use funky error class
  raw-posix: Deprecate aio=threads fallback without O_DIRECT
  raw-posix: Deprecate host floppy passthrough
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio-serial api: guest_writable callback for users

# gpg: Signature made Thu Mar 19 12:06:55 2015 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"

* remotes/amit/tags/vser-for-2.3-3:
  virtio: serial: expose a 'guest_writable' callback for users
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Error classes are a leftover from the days of "rich" error objects.
New code should always use ERROR_CLASS_GENERIC_ERROR.  Commit
b7b9d39a..7c6a4ab8 added uses of ERROR_CLASS_DEVICE_NOT_FOUND.  Replace
them.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

trivial patches for 2015-03-19

# gpg: Signature made Thu Mar 19 08:57:54 2015 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-03-19: (24 commits)
  qga/commands-posix: Fix resource leak
  elf-loader: Add missing error handling for call of lseek
  elf-loader: Fix truncation warning from coverity
  hmp: Fix texinfo documentation
  Fix typos in comments
  qtest/ahci: Fix a bit mask expression
  vl: fix resource leak with monitor_fdset_add_fd
  smbios: add max speed comdline option for type-17 (meory device) structure
  pc-dimm: Add description for device list.
  configure: enable kvm on x32
  error: Replace error_report() & error_free() with error_report_err()
  arm: fix memory leak
  qmp: Drop unused .user_print from command definitions
  hmp: Fix definition of command quit
  target-moxie: Fix warnings from Sparse (one-bit signed bitfield)
  block/qapi: Fix Sparse warning
  Fix remaining warnings from Sparse (void return)
  qom: Fix warning from Sparse
  target-mips: Fix warning from Sparse
  arm/nseries: Fix warnings from Sparse
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MIPS patches 2015-03-18

Changes:
* bug fixes

# gpg: Signature made Wed Mar 18 10:06:00 2015 GMT using RSA key ID 0B29DA6B
# gpg: Can't check signature: public key not found

* remotes/lalrae/tags/mips-20150318:
  target-mips: save cpu state before calling MSA load and store helpers
  target-mips: fix hflags modified in delay / forbidden slot
  target-mips: fix CP0.BadVAddr by stopping translation on Address Error
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vnc: fix websockets & QMP.

# gpg: Signature made Wed Mar 18 13:12:35 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20150318-1:
  ui: ensure VNC websockets server checks the ACL if requested
  ui: remove separate gnutls_session for websockets server
  ui: enforce TLS when using websockets server
  ui: fix setup of VNC websockets auth scheme with TLS
  ui: split setup of VNC auth scheme into separate method
  ui: report error if user requests VNC option that is unsupported
  ui: replace printf() calls with VNC_DEBUG
  ui: remove unused 'wiremode' variable in VncState struct
  vnc: Fix QMP change not to use funky error class
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Users of virtio-serial may want to know when a port becomes writable.  A
port can stop accepting writes if the guest port is open but not being
read from.  In this case, data gets queued up in the virtqueue, and
after the vq is full, writes to the port do not succeed.

When the guest reads off a vq element, and adds a new one for the host
to put data in, we can tell users the port is available for more writes,
via the new ->guest_writable() callback.
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Currently, if the user requests aio=native, but forgets to choose a
cache mode that sets O_DIRECT, that request is silently ignored and raw
falls back to aio=threads.

Deprecate that behaviour so we can make it an error in future qemu
versions.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

pci, virtio bugfixes for 2.3

Just a bunch of bugfixes. Should be nothing remarkable here.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed Mar 18 12:31:03 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  pcie_aer: fix comment to match pcie spec
  pci: fix several trivial typos in comment
  aer: fix a wrong init PCI_ERR_COR_STATUS w1cmask type register
  pcie_aer: fix typos in pcie_aer_inject_error comment
  aer: fix wrong check on expose aer tlp prefix log
  pcie: correct mistaken register bit for End-End TLP Prefix Blocking
  virtio: Fix memory leaks reported by Coverity
  virtio: validate the existence of handle_output before calling it
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Raise your hand if you have a physical floppy drive in a computer
you've powered on in 2015.  Okay, I see we got a few weirdos in the
audience.  That's okay, weirdos are welcome here.

Kidding aside, media change detection doesn't fully work, isn't going
to be fixed, and floppy passthrough just isn't earning its keep
anymore.

Deprecate block driver host_floppy now, so we can drop it after a
grace period.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

- kvm: ioeventfd fix for PPC64LE
- virtio-scsi: misc fixes
- fix for --enable-profiler
- nbd: fixes from Max
- build: fix for scripts/make_device_config.sh
- exec: fix for address_space_translate

# gpg: Signature made Wed Mar 18 11:11:08 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  exec: Respect as_tranlsate_internal length clamp
  virtio-scsi-dataplane: fix memory leak in virtio_scsi_vring_init
  profiler: Reenable built-in profiler
  kvm: fix ioeventfd endianness on bi-endian architectures
  virtio-scsi: Fix assert in virtio_scsi_push_event
  build: pass .d file name to scripts/make_device_config.sh, fix makefile target
  coroutine-io: Return -errno in case of error
  nbd: Drop unexpected data for NBD_OPT_LIST
  nbd: Fix interpretation of the export flags
  nbd: Fix nbd_receive_options()
  nbd: Set block size to BDRV_SECTOR_SIZE
  nbd: Fix potential signed overflow issues
  qemu-nbd: fork() can fail
  nbd: Handle blk_getlength() failure
  nbd: Pass return value from nbd_handle_list()
  nbd: Fix nbd_establish_connection()'s return value
  qemu-nbd: Detect unused partitions by system == 0
  util/uri: Add overflow check to rfc3986_parse_port
  nbd: Fix overflow return value
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It's detected by coverity. Close the dirfd.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This fixes a warning from Coverity.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Coverity reports a truncation due to cast operation on operand
reltab->sh_size from 64 bits to 32 bits for calls of load_at.

Fix the types of the function arguments to match their use in
function load_at: the offset is used for lseek which takes an
off_t parameter, the size is used for g_malloc and read.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Several issues:

* Commands i and o lack @item.  Their one-liner documentation gets
  squashed into the preceding command print.  Add the obvious @item.

* Commands i, o and cpu-add lack @findex.  The function index doesn't
  have them.  Add the obvious @findex.

* Commit 727f005e put block_set_io_throttle was added in the middle of
  block_passwd.  Move it.

* Correct spelling of commands chardev-add and chardev-remove in @item
  and @findex.

* Some commands have a blank line between @item/@findex and the text,
  most don't.  Normalize to no blank line.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NViswesh <visweshn92@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A thinko that clang 3.5.0 caught.
Thankfully does not introduce any new failures.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

monitor_fdset_add_fd returns an AddfdInfo struct (used by the QMP
command add_fd).  Free it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The pc-dimm option presented on device list (by argument "-device \?")
is the unique option that don't have any information about it. This
patch adds a description for the pc-dimm device to help users to
identify it.
Signed-off-by: NPaulo Vital <paulo.vital@profitbricks.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Here's a trivial change to enable kvm on x32 architecture.
I'm not 100% sure the result works correctly in all cases,
but this is a good start and in theory everything should
work.
Signed-off-by: NAdam Borowski <kilobyte@angband.pl>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

This is a continuation of the work started in commit 565f65d2:
"error: Use error_report_err() where appropriate"
Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>