Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-id: 1410626734-3804-20-git-send-email-rth@twiddle.net
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Default to false.

Tidy variable naming and inline cast uses while at it.

Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This patch uses inbound GPIO lines (IRQ and FIR) for
interrupts instead of using the old pic_cpu method,
which doesn't correspond to real hardware.

This creates the CPU's inbound IRQ and FIR GPIO lines and
updates the Microblaze boards to use this new method.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Suggested-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reveiwed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Commit c643bed9 moved qemu_init_vcpu() calls to common CPUState code.
This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed".

The reason for the failure is that CPUClass::kvm_fd is not yet
initialized in the following call graph:
->x86_cpu_realizefn
 ->x86_cpu_apic_realize
  ->qdev_init
   ->device_set_realized
    ->device_reset (hotplugged == 1)
     ->apic_reset_common
      ->vapic_base_update
       ->kvm_apic_vapic_base_update
This causes attempted KVM vCPU ioctls to fail.

By contrast, in the non-hotplug case the APIC is reset much later, when
the vCPU is already initialized.

As a quick and safe solution, move the qemu_init_vcpu() call back into
the targets' realize functions.
Reported-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386)
Tested-by: Jia Liu <proljc@gmail.com> (for openrisc)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Completes migration of target-specific code to new target-*/gdbstub.c.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.

Allows building gdb_register_coprocessor() for xtensa, too.

As a side effect this should fix coprocessor register numbering for SMP.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change breakpoint_invalidate() argument to CPUState alongside.

Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().

Prepares for changing cpu_memory_rw_debug() argument to CPUState.

Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.

This adds reset logging for alpha, unicore32 and xtensa.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Since commit 878096ee (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.

Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use it for all targets, but be careful not to pass invalid CPUState.
cpu_single_env can be NULL, e.g. on Xen.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make cpustats monitor command available unconditionally.

Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Configurable at CPU synthesis/instantiation.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.

It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.

The field may not be called "env" due to it being poisoned.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Split off TCG initialization from cpu_mb_init() into mb_tcg_init() to
call it from the initfn.

Ensures that a QOM-created MicroBlazeCPU is usable.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Introduce realizefn and set realized = true from cpu_mb_init().
Signed-off-by: NAndreas Färber <afaerber@suse.de>

cpu_{save,load} were no-ops, so de facto it is unmigratable and no
backwards compatibility to keep. Therefore mark the MicroBlazeCPU as
unmigratable at device level the QOM way and suppress "cpu_common"
VMState registration by dropping CPU_SAVE_VERSION.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.

Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.

Move common parts of mips cpu_state_reset() to mips_cpu_reset().

Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Move code from cpu_mb_init() to a QOM initfn.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
[AF: Leave cpu_reset() call in cpu_mb_init()]

Move code from cpu_state_reset() to QOM mb_cpu_reset().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>

Embed CPUMBState as first member of QOM MicroBlazeCPU.

Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
[AF: Updated cpu.c to include cpu-qom.h indirectly via cpu.h]