The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.
Signed-off-by: NNathan Rossi <nathan@nathanrossi.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

sh4-next:

- TCG optimizations
- fix initramfs endianness issue

# gpg: Signature made Sun 13 Sep 2015 22:16:12 BST using RSA key ID 1DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg:                 aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg:                 aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77  196D BA9C 7806 1DDD 8C9B

* remotes/aurel/tags/pull-sh4-next-20150913:
  sh4: Fix initramfs initialization for endiannes-mismatched targets
  target-sh4: improve shad instruction
  target-sh4: improve shld instruction
  target-sh4: improve cmp/str instruction
  target-sh4: use deposit in swap.b instruction
  target-sh4: add flags markups for FP helpers
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If host and target endianness does not match, loding an initramfs does not work.
Fix by writing boot parameters with appropriate endianness conversion.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The SH4 shad instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.

Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The SH4 shld instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.

Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Instead of testing bytes one by one, we can use the following trick
from https://graphics.stanford.edu/~seander/bithacks.html:

  haszero(v) = (v - 0x01010101) & ~v & 0x80808080

The subexpression v - 0x01010101, evaluates to a high bit set in any
byte whenever the corresponding byte in v is zero or greater than 0x80.
The sub-expression ~v & 0x80808080 evaluates to high bits set in bytes
where the byte of v doesn't have its high bit set (so the byte was less
than 0x80). Finally, by ANDing these two sub-expressions the result is
the high bits set where the bytes in v were zero, since the high bits
set due to a value greater than 0x80 in the first sub-expression are
masked off by the second.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Most floating point helpers can trigger an exception, but don't change
the globals. Mark these helpers as TCG_CALL_NO_WG.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

queued tcg related patches

# gpg: Signature made Fri 11 Sep 2015 16:17:00 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20150911:
  cpu-exec: introduce loop exit with restore function
  softmmu: remove now unused functions
  softmmu: add helper function to pass through retaddr
  tlb: Add "ifetch" argument to cpu_mmu_index()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a brief comment describing how to use the debug support
from GDB.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-5-git-send-email-peter.maydell@linaro.org

SIGUSR1 is QEMU's IPI signal, and it gets sent a lot, so is
best silently passed through to the guest without stopping.
Make qemu-gdb.py do this bit of configuration for the user.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-4-git-send-email-peter.maydell@linaro.org

Split the implementation of CoroutineCommand into its own file.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-3-git-send-email-peter.maydell@linaro.org

As we add more commands to our Python gdb debugging support, it's
going to get unwieldy to have everything in a single file. Split
the implementation of the 'mtree' command from qemu-gdb.py into
its own module.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-2-git-send-email-peter.maydell@linaro.org

This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This is set to true when the index is for an instruction fetch
translation.

The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.

All targets ignore it for now, and all other callers pass "false".

This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

trivial patches for 2015-09-11

# gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-09-11: (26 commits)
  virtio-vga: enable for i386
  hw/arm/spitz: Remove meaningless blank Property
  hw/gpio/zaurus: Remove meaningless blank Property
  hw/virtio/virtio-pci: Remove meaningless blank Property
  hw/s390x/s390-virtio-bus: Remove meaningless blank Property
  typofixes - v4
  qapi-schema: remove legacy<> from doc
  disas/microblaze: Remove unused code
  help: dd missing newline
  Target-ppc: Remove unnecessary variable
  baum: Fix build with debugging enabled
  linux-user: Fix warnings caused by missing 'static' attribute
  opts: produce valid command line in qemu_opts_print
  docs: fix a qga/qapi-schema.json comment
  trivial: remove trailing newline from error_report
  maint: avoid useless "if (foo) free(foo)" pattern
  maint: avoid useless "if (foo) free(foo)" pattern
  maint: remove unused include for strings.h
  maint: remove unused include for signal.h
  maint: remove unused include for dirent.h
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This one just syncs x86_64 and i386.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NVeres Lajos <vlajos@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The legacy<> type is no longer used since 7ce7ffe0.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Compress lines and remove the variable ret.

Change made using Coccinelle script

@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;
@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;
@@
type T; identifier i;
@@
- T i;
... when != i
Signed-off-by: NShraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

cur and buf are pointers, so the difference is a ptrdiff_t
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Warnings from the Sparse static analysis tool:

linux-user/main.c:40:12: warning:
 symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
 symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
 symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
 symbol 'envlist' was not declared. Should it be static?
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily.  This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

For consistency with the rest of the comment blocks.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Minor cleanup.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional

    if (foo) {
        free(foo);
        foo = NULL;
    }

Result (feel free to squash it into your patch):
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A number of files were including strings.h but not using any
of the functions it provides
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A number of files were including signal.h but not using any
of the functions it provides
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A number of files were including dirent.h but not using any
of the functions it provides
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>