Introduce support for loading Flattened Image Trees, as used by modern
U-Boot. FIT images are essentially flattened device tree files which
contain binary images such as kernels, FDTs or ramdisks along with one
or more configuration nodes describing boot configurations.

The MIPS Boston board typically boots kernels in the form of FIT images,
and will make use of this code.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
  fixed potential memory leaks,
  isolated building option]
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>

Useful to send guest data back to QEMU.

Changes from Laszlo Ersek <lersek@redhat.com>:
- rebase the patch from Michael Tsirkin's original postings at [1] and [2]
  to the following patches:
  - loader: Allow a custom AddressSpace when loading ROMs
  - loader: Add AddressSpace loading support to uImages
  - loader: fix handling of custom address spaces when adding ROM blobs
- reject such writes immediately that would exceed the end of the array,
  rather than performing a partial write before setting the error bit: see
  the (len != dma.length) condition
- document the write interface

[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html

Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Acked-by: NGabriel Somlo <somlo@cmu.edu>
Tested-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>

According to ISO C99 / N1256 (referenced in HACKING):

> 6.5.8 Relational operators
>
> 4 For the purposes of these operators, a pointer to an object that is
>   not an element of an array behaves the same as a pointer to the first
>   element of an array of length one with the type of the object as its
>   element type.
>
> 5 When two pointers are compared, the result depends on the relative
>   locations in the address space of the objects pointed to. If two
>   pointers to object or incomplete types both point to the same object,
>   or both point one past the last element of the same array object, they
>   compare equal. If the objects pointed to are members of the same
>   aggregate object, pointers to structure members declared later compare
>   greater than pointers to members declared earlier in the structure,
>   and pointers to array elements with larger subscript values compare
>   greater than pointers to elements of the same array with lower
>   subscript values. All pointers to members of the same union object
>   compare equal. If the expression /P/ points to an element of an array
>   object and the expression /Q/ points to the last element of the same
>   array object, the pointer expression /Q+1/ compares greater than /P/.
>   In all other cases, the behavior is undefined.

Our AddressSpace objects are allocated generally individually, and kept in
the "address_spaces" linked list, so we mustn't compare their addresses
with relops.

Convert the pointers subjected to the relop in rom_order_compare() to
"uintptr_t":

> 7.18.1.4 Integer types capable of holding object pointers
>
> 1 [...]
>
>   The following type designates an unsigned integer type with the
>   property that any valid pointer to void can be converted to this type,
>   then converted back to pointer to void, and the result will compare
>   equal to the original pointer:
>
>   /uintptr_t/
>
>   These types are optional.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aSigned-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

* Commit 3e76099a ("loader: Allow a custom AddressSpace when loading
  ROMs") introduced the "Rom.as" field:

  (1) It modified the utility callers of rom_insert() to take "as" as a
      new parameter from *their* callers, and set "rom->as" from that
      parameter. The functions covered were rom_add_file() and
      rom_add_elf_program().

  (2) It also modified rom_insert() itself, to auto-assign
      "&address_space_memory", in case the external caller passed -- and
      the utility caller forwarded -- as=NULL.

  Except, commit 3e76099a forgot to update the third utility caller of
  rom_insert(), under point (1), namely rom_add_blob().

* Later, commit 5e774eb3 ("loader: Add AddressSpace loading support
  to uImages") added the load_uimage_as() function, and the
  rom_add_blob_fixed_as() function-like macro, with the necessary changes
  elsewhere to propagate the new "as" parameter to rom_add_blob():

    load_uimage_as()
      load_uboot_image()
        rom_add_blob_fixed_as()
          rom_add_blob()

  At this point, the signature (and workings) of rom_add_blob() had been
  broken already, and the rom_add_blob_fixed_as() macro passed its "_as"
  parameter to rom_add_blob() as "callback_opaque". Given that the
  "fw_callback" parameter itself was set to NULL (correctly), this did no
  additional damage (the opaque arg would never be used), but ultimately
  it broke the new functionality of load_uimage_as().

* The load_uimage_as() function would be put to use in one of the later
  patches, commit e481a1f6 ("generic-loader: Add a generic loader").

* We can fix this only in a unified patch now. Append "AddressSpace *as"
  to the signature of rom_add_blob(), and handle the new parameter. Pass
  NULL from all current callers, except from rom_add_blob_fixed_as(),
  where "_as" has to be bumped to the proper position.

* Note that rom_add_file() rejects the case when both "mr" and "as" are
  passed in as non-NULL. The action that this is apparently supposed to
  prevent is the

    rom->mr = mr;

  assignment (that's the only place where the "mr" parameter is used in
  rom_add_file()). In rom_add_blob() though, we have no "mr" parameter,
  and the actions done on the fw_cfg branch:

    if (fw_file_name && fw_cfg) {
        if (mc->rom_file_has_mr) {
            data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
            mr = rom->mr;
        } else {
            data = rom->data;
        }

  reflect those that are performed by rom_add_file() too (with mr==NULL):

    if (rom->fw_file && fw_cfg) {
        if ((!option_rom || mc->option_rom_has_mr) &&
            mc->rom_file_has_mr) {
            data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
        } else {
            data = rom->data;
        }

  Hence we need no additional restrictions in rom_add_blob().

* Stable is not affected as both problematic commits appeared first in
  v2.8.0-rc0.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org
Fixes: 3e76099a
Fixes: 5e774eb3Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add a new function load_image_targphys_as() that allows the caller
to specify an AddressSpace to use when loading a targphys. The
original load_image_targphys() function doesn't have any change in
functionality.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 87de45de7acf02cbe6bae9d6c4d6fb8f3aba4f61.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a new function load_uimage_as() that allows the caller to
specify an AddressSpace to use when loading the uImage. The
original load_uimage() function doesn't have any change in
functionality.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1254092e6b80d3cd3cfabafe165d56a96c54c0b5.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a new function load_elf_as() that allows the caller to specify an
AddressSpace to use when loading the ELF. The original load_elf()
function doesn't have any change in functionality.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 8b5cefecdf56fba4ccdff2db880f0b6b264cf16f.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When loading ROMs allow the caller to specify an AddressSpace to use for
the load.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 85f86b94ea94879e7ce8b12e85ac8de26658f7eb.1474331683.git.alistair.francis@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Prevously the specified MemoryRegion was ignored during the rom register
reset. This patch uses the rom MemoryRegion is avaliable.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: d63fef5524deeb88e0068ca9d3fd4c8344f54dd4.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Entries are inserted in filename order instead of being
appended to the end in case sorting is enabled.

This will avoid any future issues of moving the file creation
around, it doesn't matter what order they are created now,
the will always be in filename order.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Added machine type handling for compatibility.  This was
a fairly complex change, this will preserve the order of fw_cfg
for older versions no matter what order the firmware files
actually come in.  A list is kept of the correct legacy order
and the entries will be inserted based upon their order in
the list.  Except that some entries are ordered (in a specific
area of the list) based upon what order they appear on the
command line.  Special handling is added for those entries.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: NVeronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 57cb38b3 included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some CPUs are of an opposite data-endianness to other components in the
system. Sometimes elfs have the data sections layed out with this CPU
data-endianness accounting for when loaded via the CPU, so byte swaps
(relative to other system components) will occur.

The leading example, is ARM's BE32 mode, which is is basically LE with
address manipulation on half-word and byte accesses to access the
hw/byte reversed address. This means that word data is invariant
across LE and BE32. This also means that instructions are still LE.
The expectation is that the elf will be loaded via the CPU in this
endianness scheme, which means the data in the elf is reversed at
compile time.

As QEMU loads via the system memory directly, rather than the CPU, we
need a mechanism to reverse elf data endianness to implement this
possibility.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add an API to load an elf header header from a file. Populates a
buffer with the header contents, as well as a boolean for whether the
elf is 64b or not. Both arguments are optional.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: Fix typo in comment]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a new function load_image_mr(), which behaves like
load_image_targphys() except that it loads the ROM image to
a specified MemoryRegion rather than to a specified physical
address. This is useful when a ROM blob needs to be loaded
to a particular flash or ROM device but the address of that
device in the machine's address space is not known. (For
instance, ROMs in devices, or ROMs which might exist in
a different address space to the system address space.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-37-git-send-email-peter.maydell@linaro.org

This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

Commit ef701d7b screwed up handling of out-of-memory conditions.
Before the commit, we report the error and exit(1), in one place.  The
commit lifts the error handling up the call chain some, to three
places.  Fine.  Except it uses &error_abort in these places, changing
the behavior from exit(1) to abort(), and thus undoing the work of
commit 39228250 "exec: Don't abort when we can't allocate guest
memory".

The previous commit fixed up uses of memory_region_init_ram().  One of
them was replaced by memory_region_init_resizeable_ram() [sic!] in
commit a1666142, so Coccinelle missed it.  Fix it up.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-4-git-send-email-armbru@redhat.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>

The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

On ARM, commit ac9d32e3 postponed the
memory preparation for boot until the machine init done notifier. This
has for consequence to insert ROM at machine init done time.

However the rom_load_all function stayed called before the ROM are
inserted. As a consequence the rom_load_all function does not do
everything it is expected to do, on ARM.

It currently registers the ROM reset notifier but does not iterate through
the registered ROM list. the isrom field is not set properly. This latter
is used to report info in the monitor and also to decide whether the
rom->data can be freed on ROM reset notifier.

To fix that regression the patch moves the rom_load_all call after
machine init done. We also take the opportunity to rename the rom_load_all
function into rom_check_and_resgister_reset() and integrate the
rom_load_done in it.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reported-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1434470874-22573-1-git-send-email-eric.auger@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

ram_addr_t is an internal interface, everyone should go through
MemoryRegion.  Clean it up by making rom_add_blob return a
MemoryRegion* and using the new qemu_ram_resize infrastructure.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Coverity reports a truncation due to cast operation on operand
reltab->sh_size from 64 bits to 32 bits for calls of load_at.

Fix the types of the function arguments to match their use in
function load_at: the offset is used for lseek which takes an
off_t parameter, the size is used for g_malloc and read.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

On s390, we would like to load our "BIOS" s390-ccw.img to the end of the
RAM. Therefor we need the possibility to relocate the ELF file so that
it can also run from different addresses. This patch adds the necessary
code to the QEMU ELF loader function.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Message-Id: <1425895973-15239-2-git-send-email-thuth@linux.vnet.ibm.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Use resizeable ram API so we can painlessly extend ROMs in the
future.  Note: migration is not affected, as we are
not actually changing the used length for RAM, which
is the part that's migrated.

Use this in acpi: reserve x16 more RAM space.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

In the next patch we'd like to reuse the image decompression facility
without installing the output as a ROM at a specific guest-phys address.

In addition, expose LOAD_IMAGE_MAX_GUNZIP_BYTES, because that's a
straightforward "max_sz" argument for the new load_image_gzipped_buffer().
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-10-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

acpi build modifies internal FW CFG RAM on first access
but we forgot to mark it dirty.
If this RAM has been migrated already, it won't be
migrated again, returning corrupted tables to guest.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

lseek will return -1 on error, g_malloc0(size) and read(,,size)
paramenters cannot be negative. We should add a check for return
value of lseek().
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.

Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.

No user-visible functional changes.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A subsequent patch to ppc/spapr needs to load the RTAS blob into
qemu memory rather than target memory (so it can later be copied
into the right spot at machine reset time).

I would use load_image() but it is marked deprecated because it
doesn't take a buffer size as argument, so let's add load_image_size()
that does.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: fixed errors from checkpatch.pl]
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

As the name suggests this lets you load a ROM/disk image that is
gzipped.  It is uncompressed before storing it in guest memory.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-2-git-send-email-rjones@redhat.com
[PMM: removed stray space before ')']
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use the function provided rather than spying on the struct.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since
commit 04920fc0
    loader: store FW CFG ROM files in RAM
RAM MRs including ROM files in FW CFGs are created
and named using the file basename.

This becomes problematic if these names are
supplied by user, since the basename might not
be unique.

There are two cases we care about:
- option-rom flag.
- option ROM for devices. This triggers e.g. when
  using rombar=0.

At the moment we get an assert. E.g
qemu -option-rom /usr/share/ipxe/8086100e.rom -option-rom
/usr/share/ipxe.efi/8086100e.rom
RAMBlock "/rom@genroms/8086100e.rom" already registered, abort!

This is a regression from 1.6.

For now let's keep it simple and just avoid creating the
MRs in case of option ROMs.

when using 1.7 machine types, enable
option ROMs in RAM to match that version.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

we put copy of ROMs in MR for migration.
but the name rom_in_ram makes one think we
load it in guest RAM.
Rename has_mr to make intent clearer.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The existing load_elf() just returns -1 if it fails to load ELF. However
it could be smarter than this and tell more about the failure such as
wrong endianness or incompatible platform.

This adds additional return codes for wrong architecture, wrong
endianness and if the image is not ELF at all.

This adds a load_elf_strerror() helper to convert return codes into
string messages.

This fixes handling of what load_elf() returns for s390x, other
callers just check the return value for <0 and this remains unchanged.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.

That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.

So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.

This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.

That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.

So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.

This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>