- 05 9月, 2012 2 次提交
-
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Yonit Halperin 提交于
QXLWorker->start/stop are deprecated since spice-server 0.11.2 Signed-off-by: NYonit Halperin <yhalperi@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 22 6月, 2012 7 次提交
-
-
由 Gerd Hoffmann 提交于
Old size: 8 MB (traditional upstream qemu value). New size: 16 MB (traditional qemu-kvm value). Also adds compat properties so old machine types keep the old default values. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
In preperation for supporting a larger framebuffer for multiple monitors on a single card, add a property to qxl vgamem_size_mb, and corresponding byte sized vgamem_size, and use instead of VGA_RAM_SIZE. [ kraxel: simplify property handling, add sanity checks ] [ kraxel: fix mode copying ] Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Zap the global VGA_RAM_SIZE #define, make the vga ram size configurable for standard vga and vmware vga. cirrus and qxl are left with a fixed size (and private VGA_RAM_SIZE #define) for now. qxl needs some non-trivial adjustments in the mode list handling deal with a runtime-configurable size, which calls for a separate qxl patch. cirrus emulates cards which have 2 MB (isa) and 4 MB (pci), so I guess it would make sense to use these sizes. That change would break migration though, so I left it fixed at 8 MB size. Making it configurabls is pretty pointless for cirrus as we have to match real hardware. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
soft_reset is called from any of: * QXL_IO_RESET * vga io * pci reset handler Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Tested with linux guest. Not sure how to check actual performance affect of this. Checked with the previously send traceevent that the kvm ioctl to start/stop dirty logging is being called. (KVM_SET_USER_MEMORY_REGION). Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 14 5月, 2012 1 次提交
-
-
由 Uri Lublin 提交于
Also move it up into switch(qxl->revision) block Signed-off-by: NUri Lublin <uril@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 03 5月, 2012 10 次提交
-
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 20 4月, 2012 1 次提交
-
-
由 Stefan Weil 提交于
val is an uint64_t, therefore %d was not correct. Signed-off-by: NStefan Weil <sw@weilnetz.de> Acked-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 18 4月, 2012 1 次提交
-
-
由 Alon Levy 提交于
The addition of those values caused a regression where not specifying any value for the vram bar size would result in a 4096 _byte_ surface area. This is ok for the windows driver but causes the X driver to be unusable. Also, it's a regression. This patch returns the default behavior of having a 64 megabyte vram BAR. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 19 3月, 2012 3 次提交
-
-
由 Peter Maydell 提交于
Fix compilation failures on 32 bit hosts (cast from pointer to integer of different size; %ld expects 'long int' not uint64_t). Reported-by: NSteve Langasek <steve.langasek@canonical.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
dprint is still used for qxl_init_common one time prints. also switched parts of spice-display.c over, mainly all the callbacks to spice server. All qxl device trace events start with the qxl device id. Signed-off-by: NAlon Levy <alevy@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
If pipe creation fails, exit, don't log and continue. Fix indentation at the same time. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 29 2月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
This patch adds an 64bit pci bar for vram. It is turned off by default. It can be enabled by setting the size of the 64bit bar to be larger than the 32bit bar. Both 32bit and 64bit bar refer to the same memory. Only the first part of the memory is available via 32bit bar. The intention is to allow large vram sizes for 64bit guests, by allowing the vram bar being mapped above 4G, so we don't have to squeeze it into the pci I/O window below 4G. With vram_size_mb=16 and vram64_size_mb=256 it looks like this: 00:02.0 VGA compatible controller: Red Hat, Inc. Device 0100 (rev 02) (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device 1100 Physical Slot: 2 Flags: fast devsel, IRQ 10 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at fd020000 (32-bit, non-prefetchable) [size=8K] I/O ports at c5a0 [size=32] Memory at ffe0000000 (64-bit, prefetchable) [size=256M] Expansion ROM at fd000000 [disabled] [size=64K] [ mapping above 4G needs patched seabios: http://www.kraxel.org/cgit/seabios/commit/?h=pci64 ]
-
- 27 2月, 2012 4 次提交
-
-
由 Alon Levy 提交于
RHBZ# 747011 Removes the last user of QXL_SYNC when using update drivers that use the _ASYNC io ports. The last user is qxl_render_update, it is called both by qxl_hw_update which is the vga_hw_update_ptr passed to graphic_console_init, and by qxl_hw_screen_dump. At the same time the QXLRect area being passed to the red_worker thread is passed as a copy, as part of the QXLCookie. The implementation uses interface_update_area_complete with a bh to make sure dpy_update and qxl_flip are called from the io thread, otherwise the vga->ds->surface.data can change under our feet. With this patch sdl+spice works fine. But spice by itself doesn't produce the expected screendumps unless repeated a few times, due to ppm_save being called before update_area (rendering done in spice server thread) having a chance to complete. Fixed by next patch, but see commit message for problem introduced by it. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
Will be used in the next patch. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result, any check for SPICE_SERVER_VERSION that is now always satisfied, and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because 0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and SPICE_INTERFACE_CORE_MINOR == 3. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Alon Levy 提交于
regression introduced by 07536094, v2: lock around qemu_spice_cursor_refresh_unlocked Reported-by: NFabiano Fidêncio <fabiano@fidencio.org> Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 25 2月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
switch console only if needed, also pass down whenever the console was switched or not because a displaysurface redraw is only needed in case the console was switched. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 2月, 2012 6 次提交
-
-
由 Gerd Hoffmann 提交于
Add two properties to specify bar sizes in megabytes instead of bytes, which is alot more user-friendly. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Factor memory bar sizing bits out to a separate function. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
There is no reason to require a minimum size of 16 MB for the vram. Lower the limit to 4096 (one page). Make it disapper completely would break guests.
-
由 Yonit Halperin 提交于
RHBZ #790083 Signed-off-by: NYonit Halperin <yhalperi@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Yonit Halperin 提交于
We used to assure the guest surfaces were saved before migration by setting the whole vram dirty. This patch sets dirty only the areas that are actually used in the vram. Signed-off-by: NYonit Halperin <yhalperi@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 15 2月, 2012 1 次提交
-
-
由 Andreas Färber 提交于
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Anthony Liguori 提交于
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 1月, 2012 1 次提交
-
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-