Implement the maintenance interrupt generation that is part of the GICv2
virtualization extensions.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-18-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the gic_update_virt() function to update the vCPU interface states
and raise vIRQ and vFIQ as needed. This commit renames gic_update() to
gic_update_internal() and generalizes it to handle both cases, with a
`virt' parameter to track whether we are updating the CPU or vCPU
interfaces.

The main difference between CPU and vCPU is the way we select the best
IRQ. This part has been split into the gic_get_best_(v)irq functions.
For the virt case, the LRs are iterated to find the best candidate.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-17-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the read and write functions for the virtual interface of the
virtualization extensions in the GICv2.

One mirror region per CPU is also created, which maps to that specific
CPU id. This is required by the GIC architecture specification.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-16-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the read/write functions to handle accesses to the vCPU interface.
Those accesses are forwarded to the real CPU interface, with the CPU id
being converted to the corresponding vCPU id (vCPU id = CPU id +
GIC_NCPU).
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Message-id: 20180727095421.386-15-luc.michel@greensocs.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement virtualization extensions in the gic_cpu_read() and
gic_cpu_write() functions. Those are the last bits missing to fully
support virtualization extensions in the CPU interface path.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-14-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement virtualization extensions in the gic_deactivate_irq() and
gic_complete_irq() functions.

When the guest writes an invalid vIRQ to V_EOIR or V_DIR, since the
GICv2 specification is not entirely clear here, we adopt the behaviour
observed on real hardware:
  * When V_CTRL.EOIMode is false (EOI split is disabled):
    - In case of an invalid vIRQ write to V_EOIR:
      -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR
         triggers a priority drop, and increments V_HCR.EOICount.
      -> If V_APR is already cleared, nothing happen

    - An invalid vIRQ write to V_DIR is ignored.

  * When V_CTRL.EOIMode is true:
    - In case of an invalid vIRQ write to V_EOIR:
      -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR
         triggers a priority drop.
      -> If V_APR is already cleared, nothing happen

    - An invalid vIRQ write to V_DIR increments V_HCR.EOICount.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Message-id: 20180727095421.386-13-luc.michel@greensocs.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement virtualization extensions in the gic_acknowledge_irq()
function. This function changes the state of the highest priority IRQ
from pending to active.

When the current CPU is a vCPU, modifying the state of an IRQ modifies
the corresponding LR entry. However if we clear the pending flag before
setting the active one, we lose track of the LR entry as it becomes
invalid. The next call to gic_get_lr_entry() will fail.

To overcome this issue, we call gic_activate_irq() before
gic_clear_pending(). This does not change the general behaviour of
gic_acknowledge_irq.

We also move the SGI case in gic_clear_pending_sgi() to enhance
code readability as the virtualization extensions support adds a if-else
level.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-12-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement virtualization extensions in gic_activate_irq() and
gic_drop_prio() and in gic_get_prio_from_apr_bits() called by
gic_drop_prio().

When the current CPU is a vCPU:
  - Use GIC_VIRT_MIN_BPR and GIC_VIRT_NR_APRS instead of their non-virt
  counterparts,
  - the vCPU APR is stored in the virtual interface, in h_apr.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-11-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add some helper functions to gic_internal.h to get or change the state
of an IRQ. When the current CPU is not a vCPU, the call is forwarded to
the GIC distributor. Otherwise, it acts on the list register matching
the IRQ in the current CPU virtual interface.

gic_clear_active can have a side effect on the distributor, even in the
vCPU case, when the correponding LR has the HW field set.

Use those functions in the CPU interface code path to prepare for the
vCPU interface implementation.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-10-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

An access to the CPU interface is non-secure if the current GIC instance
implements the security extensions, and the memory access is actually
non-secure. Until then, it was checked with tests such as
  if (s->security_extn && !attrs.secure) { ... }
in various places of the CPU interface code.

With the implementation of the virtualization extensions, those tests
must be updated to take into account whether we are in a vCPU interface
or not. This is because the exposed vCPU interface does not implement
security extensions.

This commits replaces all those tests with a call to the
gic_cpu_ns_access() function to check if the current access to the CPU
interface is non-secure. This function takes into account whether the
current CPU is a vCPU or not.

Note that this function is used only in the (v)CPU interface code path.
The distributor code path is left unchanged, as the distributor is not
exposed to vCPUs at all.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-9-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add some helper macros and functions related to the virtualization
extensions to gic_internal.h.

The GICH_LR_* macros help extracting specific fields of a list register
value. The only tricky one is the priority field as only the MSB are
stored. The value must be shifted accordingly to obtain the correct
priority value.

gic_is_vcpu() and gic_get_vcpu_real_id() help with (v)CPU id manipulation
to abstract the fact that vCPU id are in the range
[ GIC_NCPU; (GIC_NCPU + num_cpu) [.

gic_lr_* and gic_virq_is_valid() help with the list registers.
gic_get_lr_entry() returns the LR entry for a given (vCPU, irq) pair. It
is meant to be used in contexts where we know for sure that the entry
exists, so we assert that entry is actually found, and the caller can
avoid the NULL check on the returned pointer.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-8-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the register definitions for the virtual interface of the GICv2.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-7-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the necessary parts of the virtualization extensions state to the
GIC state. We choose to increase the size of the CPU interfaces state to
add space for the vCPU interfaces (the GIC_NCPU_VCPU macro). This way,
we'll be able to reuse most of the CPU interface code for the vCPUs.

The only exception is the APR value, which is stored in h_apr in the
virtual interface state for vCPUs. This is due to some complications
with the GIC VMState, for which we don't want to break backward
compatibility. APRs being stored in 2D arrays, increasing the second
dimension would lead to some ugly VMState description. To avoid
that, we keep it in h_apr for vCPUs.

The vCPUs are numbered from GIC_NCPU to (GIC_NCPU * 2) - 1. The
`gic_is_vcpu` function help to determine if a given CPU id correspond to
a physical CPU or a virtual one.

For the in-kernel KVM VGIC, since the exposed VGIC does not implement
the virtualization extensions, we report an error if the corresponding
property is set to true.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-6-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Provide a VMSTATE_UINT16_SUB_ARRAY macro to save a uint16_t sub-array in
a VMState.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-5-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some functions are now only used in arm_gic.c, put them static. Some of
them where only used by the NVIC implementation and are not used
anymore, so remove them.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-4-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers in the GICv2.
Those registers allow to set or clear the active state of an IRQ in the
distributor.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-3-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In preparation for the virtualization extensions implementation,
refactor the name of the functions and macros that act on the GIC
distributor to make that fact explicit. It will be useful to
differentiate them from the ones that will act on the virtual
interfaces.
Signed-off-by: NLuc Michel <luc.michel@greensocs.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-2-luc.michel@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We set up TLB entries in tlb_set_page_with_attrs(), where we have
some logic for determining whether the TLB entry is considered
to be RAM-backed, and thus has a valid addend field. When we
look at the TLB entry in get_page_addr_code(), we use different
logic for determining whether to treat the page as RAM-backed
and use the addend field. This is confusing, and in fact buggy,
because the code in tlb_set_page_with_attrs() correctly decides
that rom_device memory regions not in romd mode are not RAM-backed,
but the code in get_page_addr_code() thinks they are RAM-backed.
This typically results in "Bad ram pointer" assertion if the
guest tries to execute from such a memory region.

Fix this by making get_page_addr_code() just look at the
TLB_MMIO bit in the code_address field of the TLB, which
tlb_set_page_with_attrs() sets if and only if the addend
field is not valid for code execution.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180713150945.12348-1-peter.maydell@linaro.org

Now that we have full support for small regions, including execution,
we can remove the workarounds where we marked all small regions as
non-executable for the M-profile MPU and SAU.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: NCédric Le Goater <clg@kaod.org>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180710160013.26559-7-peter.maydell@linaro.org

Now that all the callers can handle get_page_addr_code() returning -1,
remove all the code which tries to handle execution from MMIO regions
or small-MMU-region RAM areas. This will mean that we can correctly
execute from these areas, rather than ending up either aborting QEMU
or delivering an incorrect guest exception.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: NCédric Le Goater <clg@kaod.org>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180710160013.26559-6-peter.maydell@linaro.org

If get_page_addr_code() returns -1, this indicates that there is no RAM
page we can read a full TB from. Instead we must create a TB which
contains a single instruction and which we do not cache, so it is
executed only once.

Since this means we can now have TBs which are not in any page list,
we also need to make tb_phys_invalidate() handle them (by not trying
to remove them from a nonexistent page list).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Tested-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-5-peter.maydell@linaro.org

When we support execution from non-RAM MMIO regions, get_page_addr_code()
will return -1 to indicate that there is no RAM at the requested address.
Handle this in tb_check_watchpoint() -- if the exception happened for a
PC which doesn't correspond to RAM then there is no need to invalidate
any TBs, because the one-instruction TB will not have been cached.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Tested-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-4-peter.maydell@linaro.org

When we support execution from non-RAM MMIO regions, get_page_addr_code()
will return -1 to indicate that there is no RAM at the requested address.
Handle this in the cpu-exec TB hashtable lookup code, treating it as
"no match found".

Note that the call to get_page_addr_code() in tb_lookup_cmp() needs
no changes -- a return of -1 will already correctly result in the
function returning false.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Tested-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-3-peter.maydell@linaro.org

The io_readx() function needs to know whether the load it is
doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it
can pass the right value to the cpu_transaction_failed()
function. Plumb this information through from the softmmu
code.

This is currently not often going to give the wrong answer,
because usually instruction fetches go via get_page_addr_code().
However once we switch over to handling execution from non-RAM by
creating single-insn TBs, the path for an insn fetch to generate
a bus error will be through cpu_ld*_code() and io_readx(),
so without this change we will generate a d-side fault when we
should generate an i-side fault.

We also have to pass the access type via a CPU struct global
down to unassigned_mem_read(), for the benefit of the targets
which still use the cpu_unassigned_access() hook (m68k, mips,
sparc, xtensa).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-2-peter.maydell@linaro.org

The differences from ARMv7-M NVIC are:
  * ARMv6-M only supports up to 32 external interrupts
   (configurable feature already). The ICTR is reserved.
  * Active Bit Register is reserved.
  * ARMv6-M supports 4 priority levels against 256 in ARMv7-M.
Signed-off-by: NJulia Suvorova <jusual@mail.ru>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)
Signed-off-by: NJulia Suvorova <jusual@mail.ru>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180718095628.26442-1-jusual@mail.ru
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Handle SCS reserved registers listed in ARMv6-M ARM D3.6.1.
All reserved registers are RAZ/WI. ARM_FEATURE_M_MAIN is used for the
checks, because these registers are reserved in ARMv8-M Baseline too.
Signed-off-by: NJulia Suvorova <jusual@mail.ru>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MSR handling is the only place where CONTROL.nPRIV is modified.
Signed-off-by: NJulia Suvorova <jusual@mail.ru>
Message-id: 20180705222622.17139-1-jusual@mail.ru
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.

Before that, valgrind points out bad memory write to console
surface. The VGA code is not aware that virtio-gpu got a message
surface scanout when the display is disabled. Let's reset VGA graphic
mode when it is the case, so that a new display surface is created
when doing further VGA operations.

https://bugs.launchpad.net/qemu/+bug/1784900/Reported-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The data in an mbuf buffer is not necessarily at the start of the
allocated buffer. (For instance m_adj() allows data to be trimmed
from the start by just advancing the pointer and reducing the length.)
This means that the allocated buffer size (m->m_size) and the
amount of space from the m_data pointer to the end of the
buffer (M_ROOM(m)) are not necessarily the same.

Commit 864036e2 tried to change the m_inc() function from
taking the new allocated-buffer-size to taking the new room-size,
but forgot to change the initial "do we already have enough space"
check. This meant that if we were trying to extend a buffer which
had a leading gap between the buffer start and the data, we might
incorrectly decide it didn't need to be extended, and then
overrun the end of the buffer, causing memory corruption and
an eventual crash.

Change the "already big enough?" condition from checking the
argument against m->m_size to checking against M_ROOM().
This only makes a difference for the callsite in m_cat();
the other three callsites all start with a freshly allocated
mbuf from m_get(), which will have m->m_size == M_ROOM(m).

Fixes: 864036e2
Fixes: https://bugs.launchpad.net/qemu/+bug/1785670Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20180807114501.12370-1-peter.maydell@linaro.org
Tested-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

The instance_init function of the xtensa CPUs creates a memory region,
but does not set an owner, so the memory region is not destroyed
correctly when the CPU object is removed. This can happen when
introspecting the CPU devices, so introspecting the CPU device will
leave a dangling memory region object in the QOM tree. Make sure to
set the right owner here to fix this issue.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Message-id: 1532005320-17794-1-git-send-email-thuth@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The code currently in gicv3_gicd_no_migration_shift_bug_post_load()
that handles migration from older QEMU versions with a particular
bug is misplaced. We need to run this after migration in all cases,
not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug"
subsection is present, so it must go in a post_load hook for the
top level VMSD, not for the subsection. Move it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-6-peter.maydell@linaro.org

Contrary to the the impression given in docs/devel/migration.rst,
the migration code does not run the pre_load hook for a
subsection unless the subsection appears on the wire, and so
this is not a place where you can set the default value for
state for the "subsection not present" case. Instead this needs
to be done in a pre_load hook for whatever is the parent VMSD
of the subsection.

We got this wrong in two of the subsection definitions in
the GICv3 migration structs; fix this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-5-peter.maydell@linaro.org

Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving various M profile vmstate structs
a 'needed' function that always returns true.
We reuse m_needed() for this, since it's always true here.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-4-peter.maydell@linaro.org

Commit 6692aac4 accidentally introduced a second initialization
of the .subsections field of vmstate_gicv3_cpu, instead of adding
the new subsection to the existing list. The effect of this was
probably that migration of GICv3 with virtualization enabled was
broken (or alternatively that migration of ICC_SRE_EL1 was broken,
depending on which of the two initializers the compiler used).
Combine the two into a single list.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-3-peter.maydell@linaro.org

Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving vmstate_gicv3_gicd_no_migration_shift_bug
a 'needed' function that always returns true.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-2-peter.maydell@linaro.org

If we do not opimize away dup_vec, we must mark its output as changed.

Fixes: 170ba88fReported-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180805233258.31892-1-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue for 2018-08-01

Here are a final couple of fixes for the 3.0 release.

# gpg: Signature made Wed 01 Aug 2018 04:52:57 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.0-20180801:
  sam460ex: Fix PCI interrupts with multiple devices
  hw/misc/macio: Fix device introspection problems in macio devices
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>