# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
  ide: Add fall through annotations
  block: Create proper size file for disk mirror
  ahci: Add migration support
  ahci: Change data types in preparation for migration
  ahci: Remove unused AHCIDevice fields
  hbitmap: add assertion on hbitmap_iter_init
  mirror: do nothing on zero-sized disk
  block/vdi: Check for bad signature
  block/vdi: Improved return values from vdi_open
  block/vdi: Improve debug output for signature
  block: Use error code EMEDIUMTYPE for wrong format in some block drivers
  block: Add special error code for wrong format
  mirror: support arbitrarily-sized iterations
  mirror: support more than one in-flight AIO operation
  mirror: add buf-size argument to drive-mirror
  mirror: switch mirror_iteration to AIO
  mirror: allow customizing the granularity
  block: allow customizing the granularity of the dirty bitmap
  block: return count of dirty sectors, not chunks
  mirror: perform COW if the cluster size is bigger than the granularity
  ...

# By Lei Li (3) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
  QAPI: Introduce memchar-read QMP command
  QAPI: Introduce memchar-write QMP command
  qemu-char: Add new char backend CirMemCharDriver
  docs: document virtio-balloon stats
  balloon: re-enable balloon stats
  balloon: drop old stats code & API
  block: Monitor command commit neglects to report some errors

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Default to moving back to the IDLE state after the COLLECTING_DATA
state. For a well behaved guest this patch has no consequence, but
A bad guest could crash QEMU by using one of the erase commands
followed by a longer than 5 byte argument (undefined behaviour).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Software services a received packet by clearing the CTRL_S bit in the RX_CTRLn
register. If this bit is cleared, flush any packets queued for the device.
Reported-by: NJohn Williams <john.williams@xilinx.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The eth_can_rx() function only checks the first buffers status ("ping"). The
controller should be able to receive into "pong" when ping-pong is enabled.
Checks the active buffer (either "ping" or "pong") when determining can_rx()
rather than just testing "ping".
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
  PPC: e500: Select MPIC v4.2 on ppce500 platform
  PPC: e500: fix mpic_iack address
  openpic: add basic support for MPIC v4.2
  openpic: fix timer address decoding
  openpic: fix remaining issues from idr-to-destmask conversion
  pseries: Adjust default VIO address allocations to play better with libvirt
  pseries: Improve handling of multiple PCI host bridges
  target-ppc: Give a meaningful error if too many threads are specified
  cuda: Move ADB bus into CUDA state
  adb: QOM'ify ADB devices
  adb: QOM'ify Apple Desktop Bus
  cuda: QOM'ify CUDA
  ide/macio: QOM'ify MacIO IDE
  mac_nvram: QOM'ify MacIO NVRAM
  mac_nvram: Mark as Big Endian
  mac_nvram: Clean up public API
  macio: Split MacIO in two
  macio: Delay qdev init until all fields are initialized
  macio: QOM'ify some more
  ppc: Move Mac machines to hw/ppc/

Since x86_64 is a superset of i386 and reuses all its test cases, adopt
all the i386 gcov source files as well, substituting their paths
appropriately.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

m48t59-test is individually being executed for sparc and sparc64, so add
the gcov source file for sparc64 as well.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 6e998903 introduced a new qtest
test case but misspelled gcov, leading to no coverage analysis. Fix it.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This is a follow up for several attempts to fix this issue.

Previous incarnations:

1. http://thread.gmane.org/gmane.linux.ubuntu.bugs.general/3156089
https://bugs.launchpad.net/bugs/918791
"qemu-kvm dies when using vmvga driver and unity in the guest" bug.
Fix by Serge Hallyn:
 https://launchpadlibrarian.net/94916786/qemu-vmware.debdiff
This fix is incomplete, since it does not check width and height
for being negative.  Serge weren't sure if that's the right place
to fix it, maybe the fix should be up the stack somewhere.

2. http://thread.gmane.org/gmane.comp.emulators.qemu/166064
by Marek Vasut: "vmware_vga: Redraw only visible area"

This one adds the (incomplete) check to vmsvga_update_rect_delayed(),
the routine just queues the rect updating but does no interesting
stuff.  It is also incomplete in the same way as patch by Serge,
but also does not touch width&height at all after adjusting x&y,
which is wrong.

As far as I can see, when processing guest requests, the device
places them into a queue (vmsvga_update_rect_delayed()) and
processes this queue in different place/time, namely, in
vmsvga_update_rect().  Sometimes, vmsvga_update_rect() is
called directly, without placing the request to the gueue.
This is the place this patch changes, which is the last
(deepest) in the stack.  I'm not sure if this is the right
place still, since it is possible we have some queue optimization
(or may have in the future) which will be upset by negative/wrong
values here, so maybe we should check for validity of input
right when receiving request from the guest (and maybe even
use unsigned types there).  But I don't know the protocol
and implementation enough to have a definitive answer.

But since vmsvga_update_rect() has other sanity checks already,
I'm adding the missing ones there as well.

Cc'ing BALATON Zoltan and Andrzej Zaborowski who shows in `git blame'
output and may know something in this area.

If this patch is accepted, it should be applied to all active
stable branches (at least since 1.1, maybe even before), with
minor context change (ds_get_*(s->vga.ds) => s->*).  I'm not
Cc'ing -stable yet, will do it explicitly once the patch is
accepted.

BTW, these checks use fprintf(stderr) -- it should be converted
to something more appropriate, since stderr will most likely
disappear somewhere.

Cc: Marek Vasut <marex@denx.de>
CC: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Perform input tests on random data.

Improvement to code coverage for qapi/string-input-visitor.c
is about 3 percentage points.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

.lo files in stubs/, util/ and libcacard/ were not cleaned.
Fix this.

Cc: Blue Swirl <blauwirbel@gmail.com>
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Align the device tree blob to a 4KB boundary, not to QEMU's
idea of a page boundary -- the latter is the smallest possible
page size for the architecture, which on ARM is 1KB.
The documentation for Linux does not impose separation
or alignment requirements on the device tree blob, but
in practice some kernels will happily trash the entire
page the initrd ends in after they have finished uncompressing
the initrd. So 4KB-align the DTB to ensure it does not get
trampled by these kernels.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Avoid unused variable warnings:
qemu-char.c: In function 'qmp_chardev_open_port':
qemu-char.c:3132: warning: unused variable 'fd'
qemu-char.c:3132: warning: unused variable 'flags'

in configurations with neither HAVE_CHARDEV_TTY nor
HAVE_CHARDEV_PARPORT set.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

config-devices.mak.d is included from Makefile.target, i.e. from inside
the *-softmmu/ directory. It included the directory path, so never
applied to the actual ./config-devices.mak. Symptoms were spurious
build failures due to missing dependency on default-configs/pci.mak.

Fix this by using `basename` to strip the directory path.
Reported-by: NGerhard Wiesinger <lists@wiesinger.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

read_splashfile() passes the address of an int variable as size_t *
parameter to g_file_get_contents(), with a cast to gag the compiler.

No problem on machines where sizeof(size_t) == sizeof(int).

Happens to work on my x86_64 box (64 bit little endian): the least
significant 32 bits of the file size end up in the right place
(caller's variable file_size), and the most significant 32 bits
clobber a place that gets assigned to before its next use (caller's
variable file_type).

I'd expect it to break on a 64 bit big-endian box.

Fix up the variable types and drop the problematic cast.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Honour float_muladd_negate_c in the case where the product is zero and
c is nonzero.  Previously we would fail to negate c.

Seen in (and tested against) the gfortran testsuite on MIPS.
Signed-off-by: NRichard Sandiford <rdsandiford@googlemail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
    case THINGY_3: idx++;
    case THINGY_2: idx++;
    case THINGY_1: idx++;
    case THINGY_0: return s->thingy[idx];

This makes static analysers happy.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit 'return' statement to a case in smc91c111_readb
rather than relying on fallthrough to the following case's
return statement, for code clarity and to placate static analysers.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Mark the deliberate fallthrough where we treat the case of
an attempt to read flash when it is an unknown command
state as if it were a normal read.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
  case THINGY_3: idx++;
  case THINGY_2: idx++;
  case THINGY_1: idx++;
  case THINGY_0: return s->thingy[idx];

This makes static analysers happy.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Explicitly mark cases where we are deliberately falling
through to the following code. In one case we insert a
'break' instead of falling through to a 'break', as this
seems slightly clearer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add some break statements that were accidentally omitted
from some cases of arm_sysctl_write(). The omission was
harmless because in both cases the following case did
an immediate break, but adding the breaks explicitly
placates static analysers and avoids weird behaviour if
the following register is ever implemented as something
other than a no-op.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Now, if seccomp is detected, it is linked into every executable,
but is used only by softmmu targets (from vl.c).  So link it
only where it is actually needed.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename qemu_vmalloc() to bsd_vmalloc(), adjust the only user.

Remove #ifdeffery in oslib-posix.c.
Tested-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

extra-obj-y is somewhat complicated to understand.  Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile.  This is similar to how
we define symbols for hardware components.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It is also needed if !CONFIG_SOFTMMU, unlike everything that surrounds it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

I had missed the introduction of the gcov-files-* variables.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The compatible string is changed to fsl,mpic on all e500 platforms, to
advertise the existence of BRR1.  This matches what the device tree will
have on real hardware.

With MPIC v4.2 max_cpu can be increased from 15 to 32.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

MPIC+0xa0 is IACK for the current CPU.  MPIC+0x200a0 is IACK for CPU 0.
This fix allows EPR to work with an SMP target.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Besides the new value in the version register, this provides:
- ILR support, which includes:
  - IDR becoming a pure CPU bitmap, allowing 32 CPUs
  - machine check output support (though other parts of QEMU need to
    be fixed for it to do something other than immediately reboot the
    guest)
- dummy error interrupt support (EISR0/EIMR0 read as zero)
  - actually all FSL MPICs get all summary registers returning zero for now,
    which includes EISR0/EIMR0

Various refactoring is done to support these changes and to ease
new functionality (e.g. a more flexible way of declaring regions).

Just as the code was already not a full implementation of MPIC v2.0,
this is not a full implementation of MPIC v4.2 -- e.g. it still has only
one bank of MSIs.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The timer memory range begins at 0x10f0, so that address 0x1120 shows
up as 0x30, 0x1130 shows up as 0x40, etc.  However, the address
decoding (other than TFRR) is not adjusted for this, causing the
wrong registers to be accessed.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

openpic_update_irq() was checking idr rather than destmask, treating
it as if it were a simple bitmap of cpus.  Changed to use destmask.

IPI delivery was removing bits directly from .idr, without calling
write_IRQreg_idr so that the change could be conveyed to destmask.
Changed to use destmask directly.

Save/restore destmask when serializing, as due to the IPI change it
cannot be reproduced from idr.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently, if VIO devices for pseries don't have addresses explicitly
allocated, they get automatically numbered from 0x1000.  This is in the
same general range that libvirt will typically assign VIO device addresses.

That means that if there is a device libvirt doesn't know about, and it
gets an address assigned before the libvirt assigned devices are processed,
we can end up with an address conflict (qemu will abort with an error).

While the real solution is to teach libvirt about the other devices, so it
can correctly manage the whole allocation, this patch reduces the interim
inconvenience by moving qemu allocations to a range that libvirt is less
likely to conflict with.

Because the guest gets the device addresses through the device tree, these
addresses are truly arbitrary and can be changed without breaking guests.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Multiple - even many - PCI host bridges (i.e. PCI domains) are very
common on real PAPR compliant hardware.  For reasons related to the
PAPR specified IOMMU interfaces, PCI device assignment with VFIO will
generally require at least two (virtual) PHBs and possibly more
depending on which devices are assigned.

At the moment the qemu PAPR PCI code will not deal with this well,
leaving several crucial parameters of PHBs other than the default one
uninitialized.  This patch reworks the code to allow this.

Every PHB needs a unique BUID (Bus Unit Identifier, the id used for
the PAPR PCI related interfaces) and a unique LIOBN (Logical IO Bus
Number, the id used for the PAPR IOMMU related interfaces).  In
addition they need windows in CPU real address space to access PCI
memory space, PCI IO space and MSIs.  Properties are added to the PCI
host bridge qdevice to allow configuration of all these.

To simplify configuration of multiple PHBs for common cases, a
convenience "index" property is also added.  This can be set instead
of the low-level properties, and will generate suitable values for the
other parameters, different for each index value.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the target-ppc tcg code only supports a single thread.  You can
specify more, but they're treated identically to multiple cores.  On KVM
we obviously can't support more threads than the hardware; if more are
specified it will cause strange and cryptic errors.

This patch clarifies the situation by giving a simple meaningful error if
more threads are specified than we can support.
Signed-off-by: NMike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>