At the moment all the class_init functions and TypeInfo structures for the
various versioned pseries machine types are open-coded.  As more versions
are created this is getting increasingly clumsy.

This patch borrows the approach used in PC, using a DEFINE_SPAPR_MACHINE()
macro to construct most of the boilerplate from simpler 'class_options' and
'instance_options' functions.

This patch makes a small semantic change - the versioned machine types are
now registered through machine_init() instead of type_init().  Since the
new way is how PC already did it, I'm assuming that's correct.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

To make the spapr_machine_*_class_init() functions a little less bulky.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

pc.h defines a SET_MACHINE_COMPAT macro to make setting up compat_props
for the various PC machine versions less verbose.  There's nothing
inherently PC specific about it, though, so move it to boards.h where other
versioned machine types (like pseries-*) can use it.

While we're doing that, change it's indentation to be a bit more regular.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

Currently, the versioned spapr machine types put the machine type version
into the description string.  PC does not do this, using just the name
itself to distinguish.  Doing the same lets us move setting the description
into the common base class, simplifying the code slightly.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

The instance_init() functions for several of the pseries-x.y versioned
machine types explicitly call spapr_machine_initfn().  But that's the
instance_init function for the common parent of all those machine types,
so will already have been called beforehand by the QOM infrastructure.

Remove the redundant calls.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

hw/ppc/spapr.c has a number of definitions related to the various versioned
machine types ("pseries-2.1" .. "pseries-2.5") it defines.  These are
mostly arranged by type of function first, then machine version second, and
it's not consistent about whether it goes in increasing or decreasing
version order.

This rearranges the code to keep all the definitions for a particular
machine version together, and arrange then consistently in order most
recent to least recent.

This brings us closer to matching the way PC does things, and makes later
cleanups easier to follow.

Apart from adding some comments marking each section, this is a pure
mechanical rearrangement with no semantic changes.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

98cec76a "machine: Set MachineClass::name automatically" removed the setting
of mc->name for the pseries machine types, since it can be derived
automatically from the type names constructed with MACHINE_TYPE_NAME().

Unfortunately fb0fc8f6 "spapr: Create pseries-2.5 machine" went in later and
brought one of them back.

This removes it again.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

Section B.6.2.1 Root Node Properties of PAPR specification defines
a set of properties which shall be present in the device tree root,
one of these properties is "system-id" which "should be unique across
all systems and all manufacturers". Since UUID is meant to be unique,
it makes sense to use it as "system-id".

This adds "system-id" property to the device tree root when not empty.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Extract code from the function kvmppc_read_int_cpu_dt() that actually
reads the file into a separate function, so it can be called from
other places.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

class_size = sizeof(XICSStateClass) does not make much sense
in the RTC code and likely was just a copy-n-paste error.
Let's simply remove it.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

sdl2/opengl: add opengl context and scanout support
ui/curses: Fix color attribute of monitor for curses

# gpg: Signature made Fri 08 Jan 2016 12:42:02 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-ui-20160108-1:
  sdl2/opengl: add opengl context and scanout support
  ui/curses: Fix color attribute of monitor for curses
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: mtp and ohci fixes.

# gpg: Signature made Fri 08 Jan 2016 10:14:59 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20160108-1:
  ohci: clear pending SOF on suspend
  ohci: delay first SOF interrupt
  usb-mtp: fix call to trace function
  usb-mtp: use safe variant when cleaning events list
  ohci: fix command HostControllerReset
  ohci: fix Host Controller USBRESET
  ohci: split reset method in 3 parts
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This allows virtio-gpu to render in 3d mode.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Current text_console_update() writes totally broken color attributes
to console_write_ch(). The format now is writing,

[WRONG]
	bold << 21 | fg << 12 | bg << 8 | char
	fg == 3bits curses color number
	bg == 3bits curses color number

I can't see this format is where come from. Anyway, this doesn't work
at all.

What curses expects is actually (and vga.c is using),

[RIGHT]
	bold << 21 | bg << 11 | fg << 8 | char
	fg == 3bits vga color number
	bg == 3bits vga color number

And curses set COLOR_PAIR() up to match this format, and curses's
chtype. I.e,

	bold | color_pair | char
	color_pair == (bg << 3 | fg)

To fix, this simply uses VGA color number everywhere except curses.c
internal. Then, convert it to above [RIGHT] format to write by
console_write_ch(). And as bonus, this reduces to expose curses define
to other parts (removes COLOR_* from console.c).

[Tested the first line is displayed as white on blue back for monitor
in curses console]
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Message-id: 87r3j95407.fsf@mail.parknet.co.jp
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Block patches from 2015-12-23 until 2016-01-07.

# gpg: Signature made Thu 07 Jan 2016 22:46:08 GMT using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* remotes/maxreitz/tags/pull-block-for-peter-2016-01-07: (21 commits)
  iotests: Add test cases for blockdev-mirror
  qmp: Add blockdev-mirror command
  block: Add check on mirror target
  block: Extract blockdev part of qmp_drive_mirror
  block: Rename BLOCK_OP_TYPE_MIRROR to BLOCK_OP_TYPE_MIRROR_SOURCE
  qemu-iotests: s390x: fix test 051
  iotests: 095: Filter _img_info output
  iotests: 095: Use TEST_IMG override instead of "mv"
  iotests: 050: Use TEST_IMG override instead of "mv"
  iotests: 038: Use TEST_IMG override instead of "mv"
  iotests: 037: Use TEST_IMG override instead of "mv"
  iotests: 034: Use TEST_IMG override instead of "mv"
  iotests: 028: Use TEST_IMG override instead of "mv"
  iotests: 024: Use TEST_IMG override instead of "mv"
  iotests: 020: Use TEST_IMG override instead of "mv"
  iotests: 019: Use TEST_IMG override instead of "mv"
  iotests: 018: Use TEST_IMG override instead of "mv"
  block/qapi: Clear err for further error
  block: use drained section in bdrv_close
  qemu-iotests: make check-block.sh work on out-of-tree builds
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.

On suspend, if a SOF interrupt is raised between the stop of the
device processing and the change of the device internal state to
OHCI_USB_SUSPEND (QEMU stops SOF timer on this state change), this
interrupt is never acknowledged.

This patch clears pending SOF interrupt on OHCI_USB_SUSPEND setting.

Some details:

- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
  only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
  So if this interrupt happens and the driver is not in this state,
  the function is called again and again, moving the system to a
  CPU starvation.

- ohci_rh_suspend(): the function stop the operation and acknowledge
  pending interrupts (but doesn't disable it). Later in the function,
  the device is moved to OHCI_SUSPEND_STATE, and the driver to
  OHCI_RH_SUSPENDED. If between the moment when the interrupt is
  acknowledged and the moment when the device is suspended a new
  interrupt is raised, it will be never acknowledged because the
  driver is now not in OHCI_RH_RUNNING state.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-3-git-send-email-lvivier@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.

This does not happen on real hardware because real hardware never send
interrupt immediately after the controller has been moved to OPERATION state.

This patch tries to delay the first SOF interrupt to let driver exits from
the critical section (which is not protected against interrupts...)

Some details:

- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
  only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
  So if this interrupt happens and the driver is not in this state,
  the function is called again and again, moving the system to a
  CPU starvation.

- ohci_rh_resume(): the driver re-enables operation with OHCI_USB_OPER.
  In QEMU this start the SOF timer and QEMU starts to send IRQs. As
  the driver is not in OHCI_STATE_RUNNING and not protected against IRQ,
  the ohci_irq() can be called and the driver never moved to
  OHCI_STATE_RUNNING.
Suggested-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-2-git-send-email-lvivier@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

trace_usb_mtp_inotify_event() was being called after the object was
being freed.
Signed-off-by: NBandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-3-git-send-email-bsd@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

usb_mtp_inotify_cleanup uses QLIST_FOREACH to pick events
from a list and free them which is incorrect. Use QLIST_FOREACH_SAFE
instead.
Signed-off-by: NBandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-2-git-send-email-bsd@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Specification says that: "This bit is set by HCD to initiate a software reset of HC."
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-4-git-send-email-hpoussin@reactos.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Specification says that, when entering this state, "the contents of the registers
(except Root Hub registers) are preserved by the HC. [...] The Root Hub is being reset,
which causes the Root Hub's downstream ports to be reset and possibly powered off."
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-3-git-send-email-hpoussin@reactos.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The three parts are:
- root hub reset (ohci_roothub_reset)
- host controller soft reset (ohci_soft_reset)
- host controller hard reset (ohci_hard_reset)
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-2-git-send-email-hpoussin@reactos.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-6-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

This will start a mirror job from a named device to another named
device, its relation with drive-mirror is similar with blockdev-backup
to drive-backup.

In blockdev-mirror, the target node should be prepared by blockdev-add,
which will be responsible for assigning a name to the new node, so
we don't have 'node-name' parameter.
Signed-off-by: NFam Zheng <famz@redhat.com>
Acked-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1450932306-13717-5-git-send-email-famz@redhat.com
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-4-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

This is the part that will be reused by blockdev-mirror.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-3-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

It's necessary to distinguish source and target before we can add
blockdev-mirror, because we would want a concrete type of operation to
check on target bs before starting.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-2-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Replace the remaining "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output.
"if=ide, if=floppy, if=scsi" are not supported by s390x,
so these test cases are not executed for s390x platform.
Signed-off-by: NBo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1450752561-9300-12-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1450752561-9300-11-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-10-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-9-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-8-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-7-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-6-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-5-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-4-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-3-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-2-git-send-email-famz@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Since a5002d53 (block/qapi: allow best-effort query) we don't return at
this error, however err must be cleared before passing to
bdrv_query_snapshot_info_list below, as required by error API.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1450779107-26765-1-git-send-email-famz@redhat.com
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>